片语

casting technological parameter铸造工艺参数

Mould Pressing Technological Parameter模压工艺参数

forging technological parameter锻造工艺参数

technological parameter of furnace电炉工艺参数

construction technological parameter施工工艺参数

Technological Forming Parameter工艺成形参数

technological parameter selection工艺参数选择

technological rolling parameter轧制工艺参数

effect concentrator technological parameter双效浓缩器工艺参数

英汉例句

• And same time, we also explore the influence of technological parameter with difference chrome content to the pull pipe operation process.

  同时，还探讨了不同的含铬量对拉管生产操作过程中工艺参数的影响。

• Experiment results have shown that s. g. iron with good appearance and inner quality can be obtained so long as each technological parameter has been properly determined.

  试验结果表明，只要合理确定各项工艺参数，可以获得外观质量与内在质量良好的球墨铸铁。

• Pit entry moisture is an important technological parameter which is closely correlated with the yield and quality of Luzhou-flavour liquor.

  入池水分是关系到浓香曲酒产量、质量优劣的一项重要的工艺参数。

• The optimized technological parameter is determined so as to meet the demands of market and improve the quality of products.

  从而确定优化工艺参数，以适应市场的需求，提高产品的内在质量。

• According to the production ability of small workshop, the selection and determination of structural parameter and technological parameter for straightening machine are discussed.

  根据小型车间生产能力，论述了矫直机结构参数和工艺参数的选择与确定。

• The optimal mathematical model of technological parameter in ramie pretreatment has been set up, and the optimal solution has been found.

  建立苎麻预处理工艺参数的优化数学模型并求出最优解。

• Electroplating technological parameter includes factors of ampere density, temperature, PH value, stir, negative and positive pole. The maximum influencing factor is ampere density.

  电镀工艺参数主要包括电流密度、温度、PH值、搅拌、阴阳极和换向电流等因素，其中影响最大的是电流密度。

• The dosage of technological parameter and feasible emulsification and concentrated aid and leavening was confirmed.

  确定了该产品制作的主要工艺参数、适宜的乳化剂、增稠剂、发酵剂的用量。

• The results indicate that this system is likely to provide technical assistance to optimization of technological parameter of continuous casting.

  结果表明，此钢水连续测温系统可以为连铸工艺参数的优化提供技术支持。

• The rational rough and technological parameter of profile modified gear is gained by analysis and optimizing of forming, and the preliminary shaping size of product is defined.

  根据摩托车档位齿轮的产品特点，进行成型工艺分析优化，获得合理的产品精化毛坯，拔模斜度等参数，获取产品的预成型毛坯尺寸。

• Based on this, the technological parameter to become film thickness, the superficial appearance to the rare earth transformation membrane, the corrosion resistance influence has been analyzed.

  在此基础上，本文主要分析了工艺参数对稀土转化膜成膜厚度、表面形貌、耐蚀性的影响。

• The weaving technology of flame retardant polypropylene ATY cabin seat fabric is related. The focal point is the determination of technological parameter of GTM-88 rapier weaving.

  叙述阻燃丙纶空气变形纱机舱座椅面料的织造工艺，重点为gtm- 88型专用挠性剑桿织机的上机工艺参数的确定。

• The technological parameter of post-welded heat-treatment is determined by welding thermal simulation test.

  用焊接热模拟方法确定了焊后热处理工艺参数。

• It emphatically discussed the problems such as material selection, spheroidizing inoculation treatment, heat treatment, technological parameter control of centrifugal casting, etc.

  着重论述了材质选择，球化孕育处理，热处理和离心铸造工艺参数控制等问题。

• It is described in detail how to determine the technological parameter and size of equipment, such as rotary drum, induced draft fan, circular bag type dust collector.

  详细介绍冷却转筒、引风机，圆布袋除尘器工艺参数及设备尺寸的确定。

• By the study above, the main technological parameter are provided for the reference of device design and practical application.

  通过上述研究，为装置的设计开发及生产应用提供了主要技术参数依据。

• It is very significant to utilize the control system to reduce the manual Labour intensity, stabilize the technological parameter and improve economic returns.

  该自动控制的实施，对于降低工人劳动强度、工艺参数的稳定和选钛厂经济效益的提高都具有十分重要的意义。

• Reach a conclusion, in now available technological condition, control suitable technological parameter so will produce batch Y45S20 free-cutting steel.

  结论表明，在现有工艺条件下，控制合适的工艺参数可批量生产Y45S20易切钢。

• The optimal technological parameter was obtained by laser cladding experiment and metallographic structure analysis.

  通过熔覆试验和金相组织分析，获得了最佳工艺参数。

• Based on testing repeatedly, the structure of mould is further optimized and the technological parameter is further optimum seed, a reasonable lubricating way and annealing mean is lain down.

  通过试验研究，进一步优化了模具结构，优选了工艺参数，制定了合理的退火规范和润滑方式。

• By analyzing the relation of microstructure, weld zone quality and tensile property, it is concluded that the welding technological parameter of L245 steel is the main factor of the welding crack.

  通过分析l 245钢埋弧焊焊缝区质量、微观组织和拉伸性能关系表明，焊接工艺参数的合理制定是低合金钢l 245焊管产生裂纹等缺陷的关键因素。

• It assays technological parameter and major features of abrasive belt grinding. It also discusses the ways as to the improvement of productivity and quality of wiping out welded seam and polishing.

  设计了去焊缝及抛光用的砂带异型涂附磨具及砂带磨削装置，分析了砂带磨削工艺参数和主要特点，讨论了提高去焊缝及抛光加工质量、生产效率的途径。

• Analysis and studies on the main technological parameter of flat knitting machine of the flax, and their relations with wearability.

  对亚麻针织横机编织工艺技术中的几个主要参数进行分析与探讨，并研究它们与服用性能的关系。