片语

technological characteristics and requirements工艺特点和要求

High technological quality requirements工艺质量要求高

construction technological requirements施工工艺要求

welding technological requirements焊接工艺要求

function and technological requirements功能和技术要求

technical specifications技术规格；技术条件

process technological requirements工艺技术要求

Floor Technological Requirements地板产品技术要求

Different Technological Requirements不同工艺要求

engineering requirements技术要求

英汉例句

• the structural features and technological requirements of moulds used in various kinds of curved spray billet continuous casting machines are discussed and compared in this paper.

  本文论述了各种弧型小方坯连铸机用结晶器的结构特点和工艺要求，比较了各种结构的优缺点。

• manual feeding groove machine can do many beveling shapes, such as flat, v shape, x shape, u shape and so on, which can meet the technological requirements for butt welding.

  手动进刀，可对管子端面进行平口、v型、x型、u型等多形状坡口，能满足管子对焊时的焊接工艺要求。

• the technical process, operation and formula for producing a kind of fig fruit milk was introduced. the key technological requirements were discussed.

  介绍了一种无花果果奶的工艺流程、操作要点、产品配方等，并对有关的技术要求进行了讨论。

• the pretreatment technological requirements of oil-flax roving were researched based on the characteristics of oil-flax fiber.

  本文根据胡麻纤维的特性，探讨了胡麻粗纱染色前处理的工艺要求。

• a dual level computer temperature control system for carbon fiber production line was designed, based on its technological requirements and the monitoring software was programmed.

  针对碳纤维生产的工艺要求，总体设计了分布式碳纤维生产线温度控制系统，编写了上位机监控系统软件。

• the clean air-conditioning engineering which was designed by adapting this method has completed successfully, and all air parameters satisfy the technological requirements well after operating.

  用该方法设计的凈化空调工程已经顺利完工，投产后各项空气参数均达到工艺要求。

• the simulation result proves stability of the power supply and simulation waveform satisfies the technological requirements of co2 shielded arc welding.

  仿真结果证明所设计的电源控制系统在强烈的负载大信号扰动下，能够稳定工作，仿真波形满足co2焊的工艺要求。

• the author analyzes technological requirements of carding machine, gives the actual results obstained with using inverter controlling in the carding machine.

  本文分析了梳棉机的工艺要求，叙述了在梳棉机中使用变频器控制的实际效果。

• technological requirements for water system asset management.

  给水系统资产管理的技术要求。

• the practice shows the lifting and rotating devices for lance not only meet the technological requirements but also increase the injection quality, and can be used for related equipment.

  实践证明，该喷枪升降施转装置不但满足工艺提出的各项要求，还能提高喷吹质量，可以在相关的设备中推广。

• according to the technological requirements and features in the assembling process for the vane pump of automobile, a programme control system is designed using s7-200plc of siemens.

  根据汽车转向泵自动装配过程工艺要求和特点，采用siemens的s7-200plc设计出一种程序控制系统。

• according to the technological requirements of sewage treatment for pharmaceutical factories, it is to adopt anaerobic-anoxic-aerobic biochemistry treatment method.

  根据制药厂对污水处理的工艺要求，采用厌氧-缺氧-好氧生化处理法。

• automatic knife feeding groove machine can do many beveling shapes, such as flat, v shape, x shape, u shape and so on, which can meet the technological requirements for butt welding.

  自动进刀，可对管子端面进行平口、v型、x型、u型等多形状坡口，能满足管子对焊时的焊接工艺要求。

• the welding preparation of city gas pipeline, welding technological requirements and control for factors effecting welding quality are analyzed.

  分析了城市燃气管道的焊前準备、焊接工艺要求以及对影响焊接质量诸因素的控制。

• type of the structure was selected according to the technological requirements and pipeline arrangement of the workshop.

  设计结构形式是按大面积汽车装配车间的工艺要求，与管线布置进行选择的。

• in case these technological requirements are satisfied, quality strip with good properties and no defect can be gained.

  满足这些工艺要求就可获得具有良好性能无缺陷的优质板材。

• the process flow, process technological requirements and trial-run of the effluent system are described of the effluent treatment system of the melamine unit.

  介绍三聚氰胺装置废水处理系统的工艺流程、工艺技术要求和废水系统试车运行情况。

• the thesis explains the importance and emphasis of the city waste water treatment plant aeration control system from two aspects , technological requirements and economize.

  从工艺要求和节能两个方面说明了城市污水处理厂曝气系统控制的意义和必要性；

• options. customer can choose jacket or spraying system according their technological requirements that can heat or cool the materials or add the liquid into the materials.

  选择。用户根据工艺要求可选择带夹套或喷淋装置，从而对物料加热、冷却或在物猜中喷入适量液体；

• by analyzing technological process and combining technological requirements of synchronism shearing, the designing method of the intellect controlling system imitating human was put forward.

  通过分析塑料瓦楞板同步剪切的工艺过程，并结合工艺要求，提出了仿人智能控制系统的设计方法。

• lifting , technological requirements of consumer to panel beating part are also more and more high with being industrialized.

  随着工业化的提升，用户对钣金加工零件的工艺要求也越来越高。