片语

tension strength test拉脱力试验

tension shearing test拉伸剪切试验

PERMANENT TENSION SET TEST永久伸长率试验

tension impact test张力沖击试验

tension shear test specimen拉伸剪切试验试样

tension rupture test拉力断裂试验

pull test拉伸试验；张力试验

tension set test张紧变形试验

simple tension creep test单轴拉伸蠕变试验

英汉例句

• a kind of fiber tension test of hardware design「s method is put forward.

  提出一种测试光纤拉力的硬件设计方法。

• it is known that non-rupture test, such as the hardness test, an be used to replace rupture tension test on iron and steel casting.

  钢铁铸件用非破坏性的硬度检验代替破坏性的抗拉强度检验并在生产中应用，国内外均已有报导。

• an experimental study is performed on the measuring characteristics of botdr for structural health monitoring, including dead weight tension test and optical fiber compression-tension test.

  应用botdr检测技术对用于结构物健康监测的光纤变形检出特性进行了试验研究，包括光纤锥重拉伸试验和光纤压缩与拉张试验。

• finally, the new system model is validated by a set of uniaxial tension test data of concrete, which had been performed by authors in the laboratory.

  最后，通过在实验室完成的一组混凝土单轴拉伸试验验证了这个系统模型的合理性。

• the steel plate」 performance in the lamellar tearing resistance aspect can be assessed by reduction in area when doing tension test of through-thickness.

  钢板的抗层状撕裂性能采用厚度方向拉力试验的断面收缩率来评定。

• in this paper, the data acquisition and data processing of a microcomputer equipped tension test are presented.

  在拉伸试验中利用微机进行数据采集和数据处理，从而达到对该常规试验测试现代化的目的。

• more attentions to the tensile failure in tension test are paid; but the material failure is overlooked.

  在材料力学的常规拉伸试验中，往往仅关心拉伸失稳而忽视了材料是否失稳。

• this paper introduces a design of machine in small range tension test which is applied to a field of micro-electronics integrate circuit, by analyzing tasting method and sensor theory.

  通过对张力测试的分析及传感器的原理分析，介绍一种应用于测试微电子集成电路丝线张力的小量程张力测试机构的设计。

• force and deformation of ring specimen during hoop tension test were analyzed.

  通过等宽试样和标距试样拉伸实验，对理论分析结果进行了验证。

• in addition, uniaxial tension test fails to accurately reflect the complex stress state of tube plastic forming.

  单向拉伸试验也不能精确反映管材在实际塑性成形中所处的复杂应力状态。

• fiber tension can be reflected indirectly by measuring axial tension. therefore the acquisition and processing of axial tension is the core part of fiber tension test .

  光纤拉力可以通过测量轴向拉力来反映，因此轴向拉力数据的采集和处理是光纤拉力测试的核心部分。

• fiber tension test system is added to the fiber-polished machine, which is monitoring the changes of fiber tension in the process of fiber-polishing.

  在轮式侧边抛磨机上添加光纤拉力测试系统，实时监测和记录抛磨过程中光纤拉力的变化。

• direct tension test is the only feasible way to obtain the uniaxial tensile stress-strain curves, and the initial eccentricity is the key issue affecting the uniaxial tensile test results.

  直接拉伸试验是获得材料单轴拉伸应力-应变曲线的唯一可行方法，初始偏心是影响单轴拉伸试验结果的关键问题。

• the method of uniaxial tension test of concrete under ultra-low loading rate is described. it can be used to determine the characteristic curve of concrete under loading condition.

  本文介绍极慢速加荷条件下混凝土轴向拉伸试验方法，它能测定混凝土受载时的特性曲线。

• in the first part of the experiment, students will subject an ordinary steel reinforcing rod to a tension test using a testing machine designed specifically for that purpose.

  在第一部分，学生要用为此特制的实验仪器对一根普通预应力钢桿做拉力实验。

• the relationship between the tensile stress and the tensile strain at the initial of a tension test has been experimentally determined and analyzed.

  本文对电流变液的直流高压电场作用下，小应变范围内的拉伸应力应变过程进行了测试和分析。

• using scaling tension test method simulated the effect of leveling elongations on yield strength ratio of hot dip galvanized dual phase steels.

  研究了氮含量对热镀锌双相钢拉伸性能的影响，用定拉伸试验方法模拟了平整伸长率对热镀锌双相钢屈强比的影响。

• in this research x65 pipeline steel is chosen as the test material, and uniaxial tension test and cod test of x65 are made.

  本研究采用x65管线钢为实验材料，对其进行了单轴拉伸实验和三点弯曲实验；

• to prove the shock when rolling tension begins to be built, a load sensor is located in the midst of work pieces between two stands to do the tension test when the loop has being absorbed.

  为证明张力建立初期存在沖击，在两架连轧机轧件中间接入力传感器，进行连轧活套吸收后建立张力的试验。

• in the first place, it is pointed out defects of national standard metal molding tension test specimen for casting aluminum alloy in this paper.

  指出了铸造铝合金国家标準金属型抗拉试样在实际生产过程中存在的问题。

• the tension test at room temperature is used to study the size effect of thin copper sheet with different crystal size, different thickness and different strain rate.

  对所制备的薄铜板进行了室温拉伸实验，研究薄铜板在不同晶粒大小、不同板厚和不同应变速率下的尺寸效应。

• lowering test and tension test of anchor.

  锚投掷测验和拉力测验。