片语

thin plate[材] 薄板；极薄的金属板混响；薄钢板

thin-slab casting薄板坯连铸机

thin-slab technique薄板技术

thin-slab construction薄板结构

thin-slab caster薄板坯连铸机

thin-slab structure薄板结构

THIN-SLAB MIP薄层最大密度投影重组

thin concrete slab混凝土薄板

thin elastic slab弹性薄板

英汉例句

• A video will be presented showing how steel flow in a thin slab caster with a tapered mold is influenced and calmed down when using the EMBR.

  本文用一段录像显示一个带有一定锥度的薄板坯连铸结晶器内的钢液流动在使用了电磁制动后是如何受到影响并逐渐减弱的。

• The longitudinal surface crack on thin slab is a serious quality defect at thin slab continuous casting and rolling process.

  薄板坯表面纵裂是连铸连轧生产线上的严重质量缺陷。

• The process of thin slab continuous casting and direct rolling is different from the traditional one.

  薄板坯连铸连轧工艺的生产流程有别于传统工艺流程。

• There are two core techniques in thin slab CC:one is curved mold and the other one is liquid core reduction.

  薄板坯连铸有两个主要核心技术：一个是曲面的结晶器，一个是液芯压下技术。

• In the paper a new method using microstrip antenna was developed for the measurement of the dielectric constant of a thin slab type material.

  本文阐述利用微带天线测量薄板型介质材料介电常数的方法。

• The present paper briefly introduces the liquid core reduction process during thin slab continuously casting and compares the technique of liquid core reduction with that of soft reduction.

  介绍了薄板坯连铸过程中的液芯压下工艺，对比了液芯压下与软压下的区别。

• The difference between thin slab casting and rolling process and traditional processes is analyzed in terms of process characteristics, thermal history, and inhibitor type etc.

  从流程工序特点、热履历、抑制剂类型等方面进行对比，分析了薄板坯连铸连轧和传统板坯流程之间存在的差异性。

• The experimental results are of certain significance in guiding the design of the thin slab CC mold flux.

  实验结果对于薄板坯连铸保护渣的设计具有一定的指导意义。

• The production and technical situation of thin slab continuous casting with FTSC process in Tang Steel are introduced briefly.

  简要介绍了唐钢FTSC工艺薄板坯连铸的生产技术情况。

• Improvements in thin slab surface quality will be realized by influencing the oscillation marks using non sinusoidal oscillation curves which require the conversion to hydraulic driven oscillators.

  结晶器振动曲线采用非正弦曲线可以改善振痕，以提高铸坯表面质量，为此，需要将振动器的驱动改为液压驱动。

• The paper reviews state of the art ground pressure theory of thin slab in coal mining such as scientific concepts, foundation argumentation, theoretical development and the field application.

  文章阐述了采场薄板矿压理论建模的基本思想、立论依据、理论成果及其在煤层的普通开采和放顶煤开采中的实际应用情况；

• The movement of slabs in reheating furnace from two-strand thin slab continuous caster operations is discussed.

  讨论了两流薄板坯连铸连轧作业时铸坯在加热炉内的运动情况。

• With development of hot delivery and hot charging and thin slab continuous casting-continuous rolling technology, no defects casting billet production become even more important.

  随着热装热送技术和薄板坯连铸连轧技术的发展，无缺陷铸坯的生产变得十分重要。

• Rather new manufacturing technologies such as thin slab casting rolling and twin roll casting technology were prospected.

  介绍了具有代表性的研发趋势，如薄板坯连铸连轧、双辊薄带铸轧等新工艺。

• Development of thin slab and thin billet casting technology in China are reviewed.

  同时介绍了中国发展连铸薄板坯及细小方坯的情况。

• The surface indentations frequently occurred on thin slab is analyzed. It is pointed out that they can bring about steel leak and affect production if not being found in time.

  分析了薄板坯连续出现的表面凹陷缺陷，指出如不能及时发现薄板坯的表面凹陷，则会造成漏钢事故，严重制约生产。

• With the development of hot delivery and hot charging and thin slab continuous casting-continuous rolling technology, no defects casting billet production become even more important.

  随着热装热送技术和薄板坯连铸连轧技术的发展，无缺陷铸坯的生产变得十分重要。

• In this paper, the design and test of the thin slab casting testing unit built in Lanzhou Steel Plant is introduced.

  本文介绍建立在兰州钢厂的薄板坯连铸试验机组的设计和试验情况，对机组构成及其性能参数、设计特点作了较详细地叙述。

• CSP technology is one of the mainstream technologies in thin slab production. Manufacturing execution system plays an important role in the operational management for CSP production line.

  CSP是薄板带钢生产的主流工艺之一，制造执行系统在CSP生产线的运行管理中起着至关重要的作用。

• This paper describes the characteristics of medium and thin slab continuous caster in detail and the principles must be observed to fit these characteristics during designing the casting powder.

  详述了中薄板坯连铸机的特征，以及保护渣设计过程中，为适应这些特征所必须遵守的原则。

• A suggestible solution is the combined production of thin slab continuous casting and continuous rolling together with strip casting, so that it will be complemental in superiority for both of them.

  利用薄板坯连铸连轧和薄带铸轧组合方案生产不锈钢可以更好地形成优势互补。

• The paper analyzes the reason of thin slab hollow defect formation and formulates technical measurement to control the hollow happening.

  文中分析了薄板坯凹陷缺陷形成的原因，并制定出控制凹陷发生的技术措施。

• The cleanliness of molten steel is a key factor for thin slab casting.

  洁凈钢的生产是薄板坯连铸的关键问题。

• The slab quality was the key to the research of thin slab continuous casting and rolling process.

  铸坯质量问题是薄板坯连铸连轧工艺研究的核心问题。

• It shows that thin slab continuous casting has a greater secondary cooling intensity, a faster solidifying rate, a fine and uniform structure and less segregation than conventional slab casting.

  研究表明，薄板坯的二冷强度大，凝固速度快，组织细小、均匀，其内部溶质元素的偏析程度远低于传统连铸板坯。