片语

tool-path strategies走刀策略

tool-path path刀位规划

NC tool-path数控加工刀轨

Tool-path Verification具路径仿真加工

tool-path plan路径规划

tool-path linking刀具轨迹连接

the tool-path刀具路径

tool-path calculating刀位计算

英汉例句

• whether the tool path quality is good or bad will directly affect the machining and the machining cost of part.

  刀具运动轨迹设计质量的好坏，将直接影响零件的加工质量及加工成本。

• the fundamentals, kinematics relationship, cutter location equations and tool path generation about this new milling model are analyzed, and some real application is presented.

  文中详细地研讨了该技术的基本原理、坐标系的相对运动关系，刀位方程以及刀具轨迹的生成等问题。

• finally, tool path is generated on triangular meshes.

  最后，为生成原网格域上的刀具轨迹。

• may enter codes specifying speed, feed and cut of the tool path for computer numerical controlled (cnc) machine tools.

  可以进入计算机数控（cnc ）机床的切割者路径的指定速度，填补和切割代码。

• introduce a system of tool path generation for milling features (tpgmf).

  介绍了一种面向铣削特征的刀具轨迹生成方法。

• therefore, the shortest tool path made out is realized during manufacturing of plentiful features, thus machining time is shortened and machining efficiency is increased.

  实现了加工多个特征时所规划的走刀路径最短，缩短了走刀时间，提高了加工效率。

• when finished, the programmer may see a tool path plot of what will happen during the machining cycle.

  结束后，程序员可能会看到加工循环过程中的刀具路径图。

• the basic function of the cam module, including setting up cutter manager, tool path generating, tool path simulating, and numerical control code automatically producing.

  cam基本功能模块，包括刀具库管理、刀具轨迹生成、后置处理、轨迹仿真、数控代码自动生成等功能。

• the theoretical error in five axis nc machining, which is resulted from approximating the perfect continuous tool path with discrete linear segments, is strictly analyzed.

  对五坐标曲面加工中由离散线性运动逼近理想刀具轨迹所引起的理论加工误差进行了较严格的分析。

• in this paper, it has been researched that how to create tool location source file(clsf), simulate tool path and import nc code by using ug/cam and vericut software in a typical part.

  应用数控编程软件ug/cam和数控仿真软件vericut，探讨了零件切削加工的刀具轨迹仿真技术，以及刀轨源文件clsf产生技术、nc代码生成技术。

• algorithms for tool path calculation and cutter path interval calculation are derived. frame model for cam system of pmts is established.

  推导出了刀位轨迹算法和切削行距算法，建立了面向新型并联机床的cam系统框架模型。

• a high-precision tool path planning algorithm through the introduction of error compensation(hptppac) is proposed on the basis of the parametric line method for surface machining.

  在曲面加工参数线法的基础上，提出引入误差补偿值的参数曲面高精度刀具轨迹规划算法（hptppac）。

• tool path generation is important for complex parts nc machining, and the methodology of tool path generation affects the efficiency and quality of parts machining.

  在复杂曲面数控加工中，刀位轨迹生成算法的优劣在一定程度上影响最终加工表面质量和加工效率。

• based on the geometry characteristic and processing technique of centrifugal compressor impeller, the tool path of rough and finish machining are scheduled.

  分析了离心压气机叶轮的几何结构特点、加工工艺，并在此基础上规划了叶轮的粗、精加工刀具轨迹。

• to aim at the research on cutting direction in nc machining of free-form surfaces, a simplified time model for tool trace is established, and the system of tool path programming is discussed.

  针对自由曲面走刀方向数控加工的研究，建立了简化的刀具轨迹时间模型，并对路径规划的系统进行了讨论。

• the algorithm satisfies the needs of the new character nc machining technique that generates the tool path by the character skeleton.

  该算法满足了新的字符加工方法因为要使用字符骨架生成刀位轨迹而对细化算法的要求。

• the sum of the control quickness, drive tuning and efficient handling of the tool path is said to yield fast and accurate program execution even when working with complicated shapes.

  数控系统的快速性、驱动优化和刀具轨迹的充分处理会获得快速精确的程序执行效果，可用于复杂形状加工。

• for nc machining of plane section method, the machining path of tool cutting plane and implicit surface can be found, and the curve of the tool path is drawn by the positive-negative method.

  把隐函数的优势应用到数控加工编程中，即对于截面法的数控加工，求出刀具切削平面与隐函数曲面的加工轨迹，再用正负法绘制刀具轨迹曲线。

• the algorithm of spiral machining tool path generation is implemented.

  实现了螺旋线加工的刀具轨迹的生成算法；

• it is key problem to generate interference-free tool path of numeric control self-programming for complex surfaces.

  无干涉刀位轨迹的生成是复杂曲面数控加工编程中的核心问题。

• the method of curves of cross sections is one of the important and popularly applied ways in generation of tool path in nc machining.

  截面线法是数控加工中重要的也是应用较为广泛的一种刀具轨迹的生成方法。

• in older-style controls, the cutter dimensions had to be set very precisely in order to agree withthe tool path defined in the part program.

  在老式的控制中，刀具尺寸设置非常精确，以完成在零件程序中刀具路径的定义。

• the generation and spine interpolation technologies of tool path are researched deeply.

  深入研究了刀具轨迹自动生成技术及样条插补技术。

• the corners tool path refinement approach is presented to solve the problems occur during the corner milling process of the aeronautical thin-walled components.

  本文提出了细化圆角走刀路径的铣削方法，以解决航空薄壁件的圆角铣削加工问题。