片语

TOOTH TYPE PROFILE DIVIATION牙型轮廓偏差

normal tooth profile[机]

tooth flank profile齿面结构

corrected-tooth-profile齿形修磨

flank profile齿形；齿廓

tooth profile and trace齿廓与齿线

axial tooth profile[机]

Tooth h profile齿形

tooth-profile running serially连续工作齿形

tooth shape齿形；齿廓

英汉例句

• double circular arc helical gears(w-n gearing) has been widely used in many fields, due to one of its advantages in flexible design of tooth profile parameters.

  双圆弧齿轮是一种齿形参数设计灵活的齿轮传动形式，得到了广泛的应用。

• this paper discussed the relationship between the involute pitch of tooth root and tooth profile involute in hobbing.

  本文阐述了滚刀滚齿时齿轮齿根过渡曲线的延长渐开线的等距线与齿轮齿形渐开线的关系。

• by using the on-line computer facility, they can within an hour or so arrive at tooth profile affording a good balance between strength and meshing quality for any particular application.

  使用的联网计算机设施，他们可以在一个小时左右到达齿形提供了良好的平衡力量和啮合质量作任何特定的应用。

• this paper probed deeply into the generation of tooth profile and meshing mechanism of this typed transmission.

  文中深入探讨了该型传动的齿廓形成和啮合机理。

• the operating principle and design method of the oblique tooth-slotting cutter with asymmetric tooth profile of the rake face is discussed and analyzed.

  探讨了前刀面为非对称齿形的斜齿梳齿刀的工作原理和设计方法；

• the mathematical model to evaluate the tooth profile error of the sector by using the minimum least square method and the minimum zone method is given.

  给出了齿扇齿形误差的最小二乘评定与最小区域评定的数学模型；

• an optimization algorithm of tooth profile error in cad/cam is described in this paper.

  本文提出了一种cad/cam齿形误差的最优化算法。

• the problems about tooth profile precision of gear hobs caused by the current profiling theory and approximate design method of gear hobs are analyzed.

  分析了现行齿轮滚刀齿形造形理论及近似设计方法引起的滚刀齿形精度问题，提出一种齿轮滚刀齿形设计新方案———多参数优化齿形设计方法。

• an analytical formula for calculating conformal mapping function of the sprocket tooth profile is given.

  给出了链轮齿廓保角映射函数的解析表达式。

• the tooth profile in the middle section of tooth width is an involute.

  而且在齿宽中央截面内为渐开线齿形。

• the result indicated that the method of double dick-type cutter milling can reduced the tooth profile allowance and improved the asymmetry of tooth profile allowance.

  分析结果表明，采用双盘铣刀加工的方法，可以减少齿廓余量，改善齿廓余量的不均匀性。

• by gauging the tooth profile of double circular-arc gears, the root circle diameter method is commonly adopted today.

  当前双圆弧齿轮齿形常规测量中，普遍采用齿根圆直径测量法。

• tooth profile machining of mid-concave gear with narrow run-out groove is introduced, which solves a difficult problem using traditional machining.

  介绍了工件退刀槽宽度小于机床退刀行程的内凹齿轮的齿形加工方法，解决了传统加工方法不易实现的难题之一。

• then deal with it in the fem program and accomplish the parameterized fem model, it can be analyzed by fem efficiently and convently on the tooth profile of different tooth profile parameters.

  实现了有限元分析模型的参数化，可以方便地对不同齿形参数的齿轮进行有限元分析和计算。

• the advantages of the method are that the tooth profile of the workpiece is not necessary and the width and radius of the disc cutter can also be given at the same time.

  该方法具有以下优点：无需知道工件齿形，可同时获得刀具宽度、半径等参数。

• a modified tooth profile is thus developed taking accounts of gear strength, manufacturing and service, etc.

  然后从强度、制造和使用等方面考虑，提出一种改进齿形。

• based on analysis the continuous transmission condition of sliding-teeth transmission, the problems of segistration coefficient and tooth profile trimming are discussed.

  在分析活齿传动连续传动条件的基础上，研究活齿传动的重合度问题及齿廓修形的影响。

• if the normal section in the center of the tooth line is taken as a tooth measuring and design section, when spline hob is designed in a plane meshing, the tooth profile error is minimum.

  如果以齿纹中点法剖面作为齿形检测和设计剖面，用平面啮合法设计花键滚刀时，则齿形误差最小。

• this article introduced the double pin roll breaker's survey and the tooth profile and the roller tooth arrangement design situation analysis briefly.

  介绍了双齿辊破碎机的概况和齿形与辊齿布置设计情况。

• from the above point of view, the design for the tooth profile of the space engaged generating hob will be quite simple.

  应用此结论来设计空间啮合展成滚刀的齿形非常方便。

• calculating formulae for determining these variations and tooth profile parameters of the electric forming tool arethusn derived.

  推导出表示这些变化的计算公式以及计算电极齿形参数的公式。

• applied the inviolate-cycloid compound gear as the walking organization for shearer, systematically elaborated it which formed the principle and extracted the tooth profile equation.

  应用渐开线-摆线复合齿轮作为采煤机的行走部，系统地阐述其形成原理及求出齿廓方程。

• calculates the tooth profile angle of pinion cutters with the corrected formula of tooth profile angle. however, under this condition, the tooth profile designing error is not smallest.

  插齿刀的齿形角一般按齿形角修正公式来求，但此时的齿形设计误差不是最小。

• this paper introduces the generating method and presents equation, characteristics, some design considerations and manufacturing method of tooth profile of the cutter.

  本文介绍了针轮销孔展成技术，给出了刀具齿廓方程、特点及其设计方法。

• meanwhile obtained the tooth profile equation of pin-track by the tooth profile normal law which matched the inviolate-cycloid compound gear.

  同时利用齿廓法线法得出与该复合齿轮相配套的销轨齿廓方程。

• in order to minimize the fluctuation of gear transmission error, a procedure for deciding tooth profile modification curves was developed for involute spur gears.

  以理论渐开线直齿轮修形减振为目的，分析减小齿轮传动误差波动，啮合齿对齿廓综合修形参数应满足的几何条件；