片语

acoustic vibration acceleration measurement声发射波振动加速度测量

drum vibration frequency measurement振动轮频率测定

vibration level measurement振动测量

vibration displacement measurement振动位移测试

Vibration model measurement散斑平均

Vibration Noise Measurement振动和噪声测量

oscillator measurement振动测量

vibration range measurement振幅检测

drum vibration amplitude measurement振动轮振幅测定

英汉例句

• According to the characteristic of design and realization for SDS, experiments platform for vibration measurement is established.

  针对SDS的设计与实现特点，搭建以振动测量为基础的试验平台。

• This paper describes the method of vibration measurement and analysis for the seat of J-50 tractor.

  本文阐述了J—50拖拉机座椅的振动测试方法和分析手段，得出了测试和分析结果。

• Abstr: In order to achieve long-term unattended vibration measurement and target recognition, design an ultra low-power consumption wireless vibration sensor.

  文章摘要：为实现长期无人值守的震动测量与目标识别，设计了一种超低功耗无线震动传感器。

• It introduces a new technology of audio measurement. A laser vibration measurement meter was used in conjunction with a function signal generator and a multi-channel signal analyzer to measure audio.

  介绍一种采用激光测振仪配合函数信号发生器、双蹤示波器检测音响系统动态特性的新技术。

• Based on the vibration measurement and analysis of worm gear reducer, a new monitoring method is put forward for wear of worm and worm wheel.

  本文基于蜗桿蜗轮减速器工作中振动信号的测量和分析，提出了一种蜗桿蜗轮减速器磨损状态的振动监测方法。

• It was demonstrated through concrete examples that vibration measurement of bearings played a decisive role in predictive maintenance.

  通过具体事例证实了轴承测振在预知性维修中起到不可忽视的作用。

• The cause of vibration on the turbogenerator stator end winding is analyzed, and the meaning of natural frequency test and vibration measurement is discussed.

  本文分析了引起汽轮发电机定子绕组端部振动的原因，以及固有频率试验和振动测量的意义。

• Introduced the method to research and develop a new type sound and vibration measurement and analysis system.

  介绍了一种新型声-振动测量分析系统的研制方法。

• According to the measurement principle and the analysis of error sources, some available methods to improve the precision of torsional vibration measurement are brought forward.

  从测量原理和误差分析的角度出发，提出了提高扭振测量精度的可行途径。

• The mounting resonant frequency of vibration measurement system formed with piezoelectric acceleration sensor YD-1 and mounted magnetic base CZ-4 is addressed.

  介绍了YD - 1型压电式加速度传感器与CZ - 4型磁座构成的磁座安装测振系统的安装谐振频率。

• Let the mechanical dynamics be combined with the method of finite element analysis to establish the simulation method of vibration measurement of dynamics balancing test-bed of mechanism.

  将机械动力学与有限元分析方法相结合，建立了机构动平衡实验台振动测量的仿真方法。

• With the Doppler laser vibration measurement system, the vibration velocity curves of the flip chip and tool tip were obtained during thermo-sonic flip chip bonding.

  采用多普勒激光振动测量系统，获得了热超声倒装键合过程中工具末端及芯片的振动速度曲线。

• An integrative shock and vibration measurement system based on high-speed DSP processor is introduced.

  本文介绍了一种以高速DSP数字信号处理器为基础的沖击振动测试系统。

• Some Suggestions on forward development and application of the torsional vibration measurement technique are proposed at last.

  最后对扭振测量技术的发展和应用提出若干建议。

• This paper discussed the influence of supporting parameters on vibration measurement when the small I. C. engine was mounted on the flexible foundation.

  本文就小型内燃机安装在柔性基座上的支承特性对振动测试结果的影响进行了研究。

• Mixed collection by combining traditional vibration measurement with RS-485 field bus.

  采用传统振动测试与RS—485总线结合对多种测试信号进行混合采集。

• The vibration signals of core and winding measured from the transformer oil tank with vibration measurement system are investigated.

  利用变压器振动测试系统，对在变压器油箱表面测得的铁心及绕组的振动信号进行研究。

• The paper introduces a new method for designing the vibration measurement system by SOPC technology.

  提出一种用SOPC技术实现轴系扭振测量的方案。

• For the sudden fault of transmission parts in high speed wire rolling mill, the fault diagnosis based on the vibration measurement is an effective method.

  针对高速线材轧机传动零部件的突发故障，开展基于振动测试的故障诊断研究可以有效加以避免。

• The vibration generating mechanism of a new type of mechanical transmission unit have been analyzed and revealed through theoretical analysis and vibration measurement on a test-rig.

  通过对三环减速机环板动态受力过程的分析与振动试验，揭示了其振动发生根源。

• This article introduced the design proposal of virtual vibration measurement system.

  本文介绍了虚拟振动测试系统的设计方案。

• Suitable for vibration measurement and mode analysis of lightweight structures.

  适用于振动测量和工作模式，轻型结构的分析。

• The theory of vibration measurement by interference with a multimode single optic fiber probe and an experimental arrangement, as well as the experimental results are presented.

  本文介绍了单根多模先纤探头的干涉测振实验装置，测量原理以及实探结果。