片语

welding specification parameter焊接规范参数

welding technological parameter焊接工艺参数

welding processing parameter焊接工艺参数

welding procedure parameter焊接工艺参数

arc welding procedure parameter弧焊工艺参数

friction welding technology parameter摩擦焊工艺参数

welding electric parameter焊接电参数

welding condition焊接条件；焊接规范；焊接工艺参数

welding electronic parameter焊接电参数

welding process parameter焊接工艺参数

英汉例句

• results show that suitable welding parameter can reduce occurrence of cracking, but it is not the most important factor.

  结果表明：选择合适的焊接参数可减少裂纹的产生，但其作用有限，还不能从根本上消除裂纹。

• aiming at the zinc residue in the weld joint nugget of dp590ga, a double-impulse welding parameter with preheating impulse is designed to further improve its mechanical properties of the weld joint.

  并针对dp590ga焊点熔核中锌元素的残留现象，设计出加预热的双脉沖焊接规范，进一步改善其点焊接头的力学性能。

• it also involves a new type of welding parameter display system, can display voltage , current and welding speed.

  本文还涉及到了新型的焊接参数显示系统，可以显示电压，电流和焊接速度。

• relationship between welding parameter and filling quantity of weld metal in steel bridge welding;

  悬索桥钢箱梁桥位焊接施工环境较差，桥位焊接质量、精度控制十分关键。

• furthermore, the software and hardware for the setting, modification and adjusting of welding parameter are redesigned by the communication mode between the scm and plc.

  并采用单片机智能仪表与plc通讯的方式，重新设计了焊接参数的设置、修改、实时调整等功能的软、硬件。

• so the control of the welding parameter such as welding pressure, gas flux, upsetting length is realized, and the system has a high dynamic response rapid and a high control precision.

  从而成功地实现了对气压焊的焊接压力、气体流量、顶锻位移量等焊接过程参数的控制，并使控制系统具有较快的动态响应速度和较高的控制精度。

• extended a/d translation circuit and sample circuit of welding parameter are employed to realize the date acquisition of arc voltage and welding current in the welding process.

  控制器外扩a/d转换电路、焊接参数采样电路，在焊接过程中对电弧电压及焊接电流进行数据采集处理。

• according to the basic theories of explosive mechanics and explosive welding, a new lower limit of explosive welding parameter window for bimetal was deduced.

  文章总结了已有的爆炸焊接参数窗口理论，根据爆炸力学与爆炸焊接基本原理，发展出双金属爆炸焊接参数窗口的下限理论。

• a dual processor interactive control system with functions of welding parameter regulation and real-time control is designed and implemented for pipe welding robots.

  针对管道焊接机器人设计了一个双处理器的参数调节、实时控制功能的交互式控制系统。

• this paper proposes a procedure for artificial neural network (ann) in spot welding, and establishes spot welding parameter selecting ann systems and spot welding joint quality predicting ann systems.

  将人工神经网络技术（ann）引入点焊领域，建立了点焊工艺参数选择ann系统和点焊接头质量预测ann系统。

• firstly, in the way of numerical calculation, analytical study on residual stress and deformation of different welding parameter which on same groove type's welded splice.

  首先，本文采用数值计算的方法，对同种坡口形式的焊接接头进行了不同焊接工艺参数的残余应力及变形的分析研究。

• this technology controls welding parameter exactly, and improves welding quality for drill pipe.

  使用该技术，能及时、準确掌握焊接参数，提高鉆桿焊接质量。

• the system detects welding parameter exactly, and displays detecting outcome parameter with digit and curve. the system has an alarm function for transcendental digit.

  该系统能够精确检测摩擦焊接鉆桿时的转速、顶锻压力和保压时间、摩擦时间和位移，以数字和曲线显示检测结果，并具有数据越限报警功能。

• based on the wrought az31b magnesium alloy, the effect of the welding parameter on weld shape was analyzed in the course of the tig welding.

  以az31变形镁合金为研究对象，分析了其tig自动焊过程中焊接工艺参数对焊缝成型的影响。

• meanwhile the optimal welding parameter which was suitable for welding line impact toughness was gained by analysis on the test result of impact toughness and microstructure.

  通过对沖击韧性的测试结果与微观组织的分析，确定出使焊缝沖击韧性最佳的焊接工艺参数。

• in this paper, the reform process of the welding equipment and the choice of welding parameter about co2 enclosed-arc welding as skelp end-welding in welded steel pipe mill are introduced.

  介绍了管子、带钢接头co2气体保护自动焊焊接设备的改造过程及工艺参数选择。

• welding parameter can be set, saved and loaded. easily save up to five welding parameter programs.

  焊接工艺条件可以设定、改变、储存和调用，共有五组参数，以便作业。