片语

Using Advanced Welding Procedure采用先进焊接工艺

approved welding procedure批準的焊接工艺

arc welding procedure parameter弧焊工艺参数

welding operating procedure焊接操作方法

Welding Procedure Specification WPS焊接工艺规程

Welding g Procedure Specification WPS焊接工艺规程

welding procedure and assembly焊接和组装

welding procedure qualification we焊接工艺评定试验

Welding repair procedure补焊工艺

英汉例句

• the welding procedure of tc6 titanium alloy is studied in this paper for welding and application of assembly.

  根据tc6钛合金组件的焊接和应用，研究了tc6材料的焊接工艺性。

• the qualification is only valid for the welding process(es) used in the welding procedure test.

  此鑒定仅对焊接工艺试验使用的焊接工艺有效。

• the necessity for welding crane rails is analyzed; weldability discussed and welding procedure worked out. the product is successfully welded, too.

  论述了起重机轨道焊接的必要性，分析了其焊接性，拟定了焊接工艺并成功地焊接了产品。

• this article introduced the establishment of welding procedure of tube - tube sheet welding, and the fabrication of equipment.

  本文介绍了管子管板封口焊的焊接工艺制定及产品的焊接。

• a study was made of the welding procedure for x70-l245 butt joint of pipeline steel.

  针对不同强度级别的管线钢x70和l245对接的焊接工艺进行了研究。

• according to the analyzed results, welding procedure was improved and cracks were restrained effectively.

  根据分析结果，改进焊接工艺后，裂纹得到了有效的控制。

• this software applies to manage welding procedure qualification for steel pressure vessels.

  该软件适用于钢制压力容器焊接工艺评定的各项管理工作。

• if welding procedure tests have been performed at both a high and a low heat input level, then all intermediate heat inputs are also qualified.

  如果焊接工艺试验在高热输入值和低热输入值下进行，那么，中间的热输入也应合格。

• all new welding procedure tests are to be carried out in accordance with this standard from the date of its issue.

  自本标準出版日起，所有新的焊接工艺试验必须按本标準进行。

• the suitable welding material and the rational welding parameters were confirmed by welding procedure test of high strength weather resistant steel. it was successfully applied to the production.

  通过对新型高强度耐候钢材进行焊接工艺试验， 匹配合理的焊接材料，确定了合适的焊接工艺参数，并成功地应用于产品的焊接生产。

• the paper introduces the welding procedure and fabrication process of titanium alloy wheel, indicates the inspection method and quality result of welding location.

  介绍了钛制叶轮的焊接工艺和制造过程，说明了焊接部位的检查方法及检查结果。

• this paper which is about the welding procedure qualification test of the sa213-t23 steel pipe, analysis the influence of post heat-treatment on the weld joint, and got the right welding process.

  本文主要通过对sa213-t23钢小径管的焊接工艺评定试验，分析焊后热处理对t23钢焊接接头性能的影响，从而确定正确的焊接工艺。

• effect of automatic welding procedure on weld quality is analyzed and emphasized. the suitable and adjustable procedure parameters for different welding positions are provided.

  着重分析了焊接工艺对自动焊焊接质量的影响，给出了各工艺参数在不同焊接位置合适的范围；

• a newly developed computer aided welding procedure design system and its multi - medium programming environment vb are introduced in this paper.

  介绍了新近研制的计算机辅助焊接工艺设计系统和焊接工艺设计系统多媒体可视化集中开发环境vb。

• according to the actual situation of guangdong province township shipyard, introduction to butt welding and fillet welding procedure approval process and technical standards and the note.

  结合广东省乡镇船厂实际，介绍钢板对接焊和角接焊的焊接工艺认可流程、技术标準和有关注意事项。

• this article introduced the establishment of welding procedure of tube -tube sheet welding, and the fabrication of equipment.

  本文介绍了管子管板封口焊幻焊接工艺制定及产品的焊接。

• first, prepare wps, and then press wps welding process evaluation, pqr report form, only the welding procedure qualification requirements, wps can be used in the products of welding.

  先编制wps，然后按wps做焊接工艺评定，形成pqr报告，只有焊接工艺评定符合要求，wps才能用在产品的焊接上。

• high quality welding material and suitable welding parameters were used for the welding procedure qualification test results fully meeting the requirement of the product manufacturing specification.

  采用了高质量焊接材料和适当的焊接规范参数范围，焊接工艺评定试验结果完全满足产品制造技术条件要求；

• based on the analysis, the welding procedure qualification is performed and the welding procedure specification on the alkali evaporator is established.

  在此基础上进行了焊接工艺评定，制定了堿蒸发器的焊接工艺规程，产品获得了满意的焊接质量。

• object-oriented technology is applied in welding procedure design expert system in this article.

  将面向对象技术用于焊接工艺设计专家系统的开发。

• combined the application of actual work, the welding procedure of industrial pure nickel pipe is discussed.

  结合实际工作中的应用，针对工业纯镍的管材焊接工艺进行探讨。

• the high frequency welding procedure and its forming fundamental of spiral fin pipe is introduced.

  介绍了螺旋翅片管高频焊接工艺及其成型基本原理。

• this presentation is about the affection of welding procedure to weld formation in esw strip cladding, including welding source, procedure parameter and magnetic field.

  焊接工艺因素对带极电渣堆焊焊道成形的影响机理，主要包括焊接电源、焊接工艺参数和外加磁场的作用。

• the applies in the ocean oil gas pipeline construction bevel machine article, the belt copper liner welds and pipeline auto welding machine, welding equipment and welding procedure were introduced.

  介绍了应用于海洋油气管道施工的坡口机、带铜衬垫对口器、全位置自动焊等焊接装备和焊接工艺。

• the article introduce main function and characteristic of welding procedure qualification for steel pressure vessels computer management software.

  本文介绍了「压力容器焊接工艺评定计算机管理软件」的主要功能及特点。

• there are many factors that can result in the welding deformation, like welding procedure or residual stress of the material.

  引起焊接变形的因素较多，有可能是焊接工艺引起，也有可能是材料本身残余应力引起。

• it includes the testing method, the process and the result of welding procedure qualification.

  其中包括焊接工艺评定的试验方法、过程和结果。

• expound main features, welding procedure and application of high purity and super purity stream-conveying in semiconductor, pharmaceutical and biology engineering of polymer pipeline.

  论述了聚合物管道的主要特性、焊接工艺及其在半导体、制药和生物工程等行业内高纯或超纯物料输送方面的应用。

• this paper presents the study of weldability on steel sa204b, the welding material and welding procedure are recommended in this paper.

  本文对sa204b钢的可焊性进行了研究。在焊接工艺评定基础上提出了适合sa204b钢的焊接材料和焊接工艺。