英语释义

• gear with the thread of a worm

片语

Worm-wheel drive蜗轮传动

worm-wheel hub蜗轮轮毂

worm gear蜗轮；螺旋齿

worm-wheel shaft蜗轮轴

involute worm emery wheel渐开线蜗桿砂轮

worm and wheel drive蜗桿蜗轮传动

worm-wheel hob蜗轮滚刀

worm emery wheel蜗桿砂轮

screw gear螺旋齿轮

worm-wheel gearing蜗轮传动装置

worm grinding wheel蜗桿砂轮

英汉例句

• This paper introduces the design method of redoing ordinary lathe to special machine tool for manufacture planar second-enveloping worm wheel in details.

  较详细地介绍了用普通车床改装成加工平面二包蜗轮副专用机床的设计方法。

• Slag collector: wet slag discharge is made by hydraulic ratchet wheel, detent, worm wheel or worm from both sides.

  清灰机构：采用液压驱动棘轮、棘爪装置或蜗轮蜗桿装置湿式双侧除灰。

• The worm wheel is formed by means of two components for better receiving the worm wheel on the lever spring.

  为了更好地将蜗轮接收在杠桿弹簧上，该蜗轮两件式地构成。

• This paper introduces the structure, features and functions of the CNC system of model YKA7232 worm wheel gear grinding machine, which was developed by our institute and Shanghai machine tool works.

  本文介绍我所与上海机床厂联合研制的YKA7232型蜗桿砂轮磨齿机数控系统的软件和硬件的组成、特点和功能。

• Compared with the prior plastic-steel worm wheel, the high-performance plastic-steel worm wheel produced by the method has the advantages of larger size and higher bearing capacity.

  本发明所制得的高性能钢-塑蜗轮与现有钢-塑蜗轮相比具有更大尺寸以及更高的承载能力。

• Independent let-off worm wheel box, can assure transmission moment.

  送经机构采用独立蜗轮箱，确保传动力矩。

• A method of high precision round subsection by varied lead-interval worm and worm wheel was introduced, its drive theory, clearance adjusted framework and machining method were analyzed.

  介绍了一种采用变导程蜗轮蜗桿的高精度分度方法，分析变导程蜗轮蜗桿传动原理、变导程蜗轮蜗桿调隙结构和变导程蜗轮蜗桿加工和调整方法。

• The temperature in generatrix layer is higher than in the worm wheel layer.

  母线层的温度较高，而蜗壳层的温度较低。

• The surface of worm gear is formed by the different positions of worm wheel hob generated as machining. So prisms are inevitably produced.

  滚削蜗轮时，其齿侧面为滚刀切削刃在一系列不同位置的包络面，因而不可避免地要产生棱面。

• Using planetary gear reducer insteads of worm and worm wheel reducer in the pouring mechanism of melting cast iron pot. It had been used in practice and got its economic result.

  用小型行星减速机构代替蜗轮蜗桿减速传动装置，为铸造厂铁水包倾倒机构解决了一项生产难题，在生产中取得效益。

• The distribution feature and the fluctuation tendency of the temperature in the vicinity of the worm wheel tooth surface were investigated and analyzed.

  分析了邻近蜗轮齿面的温度分布特征及温度变化的趋势。

• The forming principle of Niemann worm wheel hob is described, the curved face equation of Niemann worm is deduced, and the normal profile of the worm wheel hob is calculated.

  论述了尼曼蜗轮滚刀的成形原理，推导了尼曼蜗桿曲面方程，计算了蜗轮滚刀的法向齿形。

• Because of their ability to reduce friction and wear, they are usually used as the material for making the worm wheel in a worm gear set.

  由于具备减摩性和耐磨性的性能，它们通常用来制作涡轮减速器中的涡轮。

• Finally, a practical example of worm wheel re ducer is introduced to demonstrate the effectiveness of the proposed method.

  最后，以蜗轮减速器装拆序列规划为实例验证该方法的有效性。

• A worm and worm wheel gives a large speed ratio but with significant sliding.

  蜗桿可获得很大的降速比，但是存在严峻的相对滑动。

• To design the mechanical and auto-control system, the worm wheel is used to drive the outer annular magnet.

  在机械及控制系统设计中，由于磁体需套装在单晶炉上，因此采用了蜗轮蜗桿机械驱动外磁环转动的机械结构。

• Involute cylindrical worm-helical gear transmission is to use helical gears to replace worm wheels in traditional worm wheel transmission so as to form a new worm transmission.

  圆柱蜗桿斜齿轮传动是在传统的蜗桿蜗轮传动中用斜齿轮取代蜗轮而形成一种新的蜗桿传动形式。

• This Robot is a joint-Robot like a man and USES worm and worm wheel and harmonic gear retarder in its machine which makes the structure of Robot more refinement.

  机器人采用了关节式类人结构，在机构上使用了谐波减速器和蜗轮蜗桿等装置使机器人的结构更加精巧。

• Worm and worm wheel mechanism is used to transfer between two crisscross axis of sports and power.

  蜗轮蜗桿机构常用来传递两交错轴之间的运动和动力。

• The calculating method of the working orthogonal clearance of the flying cutting tool machining worm wheel in radial feeding way is put forward, and a calculating example is given out.

  文中提出了考虑径向进给速度时飞刀左右侧刃工作后角的计算方法，实际算例验证了其正确性。

• This system can accomplish the design of three-dimensional worm wheel hob, construction design and the engineering drawing's automatic achieving.

  该系统可完成蜗轮滚刀的三维实体设计、结构设计与工程图的自动生成等工作。