英语释义

• the case indicating the agent in passive sentences or the instrument or manner or place of the action described by the verb

• relating to the ablative case

• tending to ablate; i.e. to be removed or vaporized at very high temperature;

  "ablative material on a rocket cone"

片语

ablative conditioning去髓性预处理

ablative plastic烧蚀塑料

ablative property烧蚀性能

ablative e离格的

ablative materials烧蚀剂

ablative foam烧蚀泡沫塑料

ablative shielding烧蚀保护层

ablative reactor烧蚀反应器

ablative chamber烧蚀冷却燃烧室

英汉例句

• The relation of linear ablative rate (ar), ablative heat insulating property index (API) and structure constant (K) to ablative heat insulating property were studied in this paper.

  本文着重研究有机聚合物线性烧蚀速率(AR)、烧蚀隔热性能指数(API)和有机聚合物结构常数(K)与烧蚀隔热性的关系。

• Finally, a more accurate calculation result is obtative with a full consideration of the coupling term in both ablative equation and heat-conduction equation.

  利用烧蚀和导热计算方程组中二者的结合部，通过充分耦合，获得了更準确的预示计算结果。

• The plasma produced in ablative capillaries by high power discharges between an anode and a hollow cathode can be used as sources for electrothermal/electrothermal chemical launchers.

  利用可消融材料制成毛细管，在其两端阳极与中空阴极间进行大功率放电，形成高压等离子体源。

• The mass loss of ablative material caused by physical, chemical and mechanical factors under high temperature affects properties of the material.

  烧蚀材料在高温环境中因物理、化学和力学因素造成质量损失，影响其性能。

• This paper discusses the raw materials and process technology of the double cone ablative shield made from resin matrix composites.

  本文对树脂基复合材料双锥防热套的原材料选择和成型工艺进行了研究。

• A method that adding an insulating functional layer to the interior of the heatshield is adopted to improve its insulation performances while maintaining its original excellent ablative performances.

  采用在防热套内层增加隔热功能层的方法，在保持传统防热套良好烧蚀性能的同时，其隔热性能得到了较大地提高。

• It is indicated that the sub default has influence on materials microstructure and some properties on the basis of NDT, TEM and analysis of ablative and mechanical property.

  对大锥角防热层的亚缺陷进行无损检测、烧蚀性能、力学性能及扫描电镜分析，分析表明亚缺陷对材料的结构和性能有一定的影响。

• The ablative property requirements and the studies on the insulation layer of solid rocket engine in oxidizer rich environment were presented.

  介绍了富氧环境下固体火箭发动机对绝热层性能的要求，以及在该特殊条件下对绝热层所开展的研究工作。

• Conclusion DWI provides the better capability to detect viable tumor of ablative therapy than with conventional MRI, and it is deserved to be applied.

  结论DWI对肝脏消融治疗后存活肿瘤的检出能力高于常规mri，具有一定的应用价值。

• This generates a plasma arc that evaporates material from the ablative device (50).

  这产生使烧蚀装置(50)的材料蒸发的等离子弧。

• The present paper is devoted to the development and establishment of corresponding thermochemical and thermomechanical ablative models by analyzing flow and C/C composite materials ablative mechanism.

  通过对碳基复合材料热化学烧蚀机理分析，由质量守恒、能量守恒及系统化学反应的热化学平衡原理，建立相应的热化学和热力学烧蚀模型。

• The paper analyses ablative mechanism of firebrick lining in imperial smelting furnace, presents the improvement measures in Shaoguan Smelter and results thus achieved.

  文章分析了铅锌密闭鼓风炉耐火材料的侵蚀机理，介绍了韶关冶炼厂鼓风炉耐火材料方面的改进及使用效果。

• The research achievement of silicone ablative material and the factors affecting its properties and applications were reviewed.

  对有机硅耐烧蚀材料发展现状，影响性能的因素及应用前景作了较全面的综述。

• Effect of ablative cooling on specific impulse of rocket engine.

  烧蚀冷却对发动机比沖的影响。

• The elements which affected the ablative properties of silicone rubber heat shields were discussed.

  探讨了影响硅橡胶热防护材料烧蚀性能的因素。

• The experimental results show that different kinds of insulation have different charring ablative rates.

  实验表明：不同材料的绝热层在加速度作用下烧蚀率明显不同。

• Objective: To investigate accessory pathway mediated tachycardias and the effect of radiofrequency ablative methods on the outcomes of ablation for accessory pathways.

  目的：探讨旁路介导的心动过速及射频消融的方法对旁路消融的影响。

• If treatment is desired, ablative or excisional modalities are appropriate.

  如确实需要治疗，可进行消融或切除。

• The usage, types and methods of evaluation of ablative materials are explained and the ablative performances of polymers in ablative materials are compared.

  文中对烧蚀材料的类型，使用原则和评价方法作了说明。

• Test the concept of aluminum-alloy casing with ablative lining.

  测试的概念，铝合金套管与烧蚀内层。

• The low density ablative materials studied here have basically reached the space grade level as a result.

  研制的低密度烧蚀材料基本达到了空间级材料水平。

• The practicability of detecting the ablative performance of the phenolic composite by thermal analysis is discussed with experiments.

  通过试验论述了热分析检测酚醛类高分子材料烧蚀性能的可能性。

• The effects of filler fiber and flame retardant on ablative performance of EPDM insulation are studied.

  研究了填充纤维、阻燃剂种类及用量对EPDM绝热层耐烧蚀性能的影响。

• The chemical non equilibrium viscous shock layer flows over a teflon ablative wall are calculated numerically.

  本文对有泰氟隆烧蚀的化学非平衡粘性激波层流场进行了数值模拟。

• This paper points out that the thermal and ablative problems of the shield can be solved solely with the coolant flow only under one-dimensional incompressible or steady condition.

  在冷却剂渗流是一维不可压缩的（或一维定常的）条件下，热层的传热和烧蚀问题可以单独求解。