片语

burnishing powder抛光粉

metal coated abrasive grain[机]

abrasive grain saw wire磨谷锯网球

abrasive grain association磨料协会

abrasive e grain研磨粒

abrasive grain size磨料粒度

sintered abrasive grain烧结磨料

superhard abrasive grain超硬磨料

abrasive particle磨料颗粒

abrasive&grain研磨料

abrasive grain dispensing植砂

英汉例句

• with the increase of grinding speed or the abrasive grain size of the grinding belt, the grinding rate increases.

  提高砂带速度、工件转速以及增大砂带磨粒粒度可有效地提高花岗巖的磨削效率。

• what is the abrasive grain being used, aluminum oxide, silicon carbide, zirconium etc? - especially for the last pass.

  问我们打磨用的砂是什么材料的，氧化铝？金刚砂？

• a method for detecting the protrusion height of diamond abrasive grain on diamond wheel was proposed based on the digital image identification technology, and the measuring system was established.

  提出一种应用数字图像识别技术检测金刚石砂轮磨粒凸出高度的检测方案，并建立了测试系统。

• the phases can improve the bonding strength between coating and matrix. the abrasive grain resistance of the coatings is 11.26 times as great as copper, the adhesion resistance is 7.97 times.

  热化学反应法制备的陶瓷涂层磨粒磨损和粘着磨损的相对耐磨性分别是基体的11.26倍和7.97倍。

• the magnetic abrasive grain is the key factor which impedes the development of magnetic abrasive finishing.

  磁性磨料是制约磁力研磨技术发展的关键因素。

• our hand pads are cut from industrial quality non-woven nylon, impregnated throughout with abrasive grain and boned with heavy duty resins.

  手磨片由高档的尼龙纤维做基材，专业的树脂将磨料均匀的粘固在基材上。

• abrasive grain makes up only 30% weight; its self-sharpening action is weaker, resulting in lower grinding efficiency.

  磨粒只占总重的30％；其自锐性弱，因而磨削效率很低。

• the second principal normal stresses can lead to grinding crack which generates forward beneath the abrasive grain in the plane of grain motion.

  在磨粒前下方，受第二主应力的作用，磨削裂纹主要沿磨削方向开裂；

• the influences of abrasive grain size, belt speed, contact roller's hardness, grinding depth and grinding feeding speed on surface roughness were discussed.

  讨论了砂带粒度、砂带线速度、接触轮硬度、磨削深度和磨削进给速度对表面粗糙度的影响规律。

• the stress and grinding mechanism of a single magnetic abrasive grain in the magnetic abrasive finishing are analyzed. the required properties and preparation technologies of mags are discussed.

  分析了磁力研磨加工过程中单个磁性磨粒的受力状况和磨削机理，论述了磁性磨粒的性能要求和制备工艺。

• in this report, the surface morphology of marble in face grinding with single abrasive grain has been observed by sem.

  本文用sem观察了大理石单颗粒端面磨削表面，并从理论上提出和分析了大理石材料的塑性迁移、断裂迁移磨削切除机理；

• the abrasive grain is impregnated in nylon.

  磨粒在尼龙中浸渍而成。