片语

single abrasive particle wear单颗粒磨损

abrasive and wear磨料磨损

soft abrasive shocking wear软磨料磨损

abrasion wear磨损；磨耗

abrasive jet wear testing喷砂磨损试验

abrasive tooth wear齿面研磨磨损

abrasive grain wear磨粒磨损

wear and tear磨损

abrasive particle wear磨粒磨损

abrasive belt wear砂带磨损

abrasive-wear tester磨损试验机

英汉例句

• Based on abrasive wear theory and combined recent and ancient samples, the essential of the sharpness, wear resistance, sharpened-ability and self-sharpening performance of cutter were discussed.

  以磨料磨损原理为指导，结合古今实例，讨论锋利刀片之锋利性、耐磨性、利磨性和自磨锐等问题的实质，给出明确定义，澄清一些模糊概念。

• The results show that the higher rough surface will result in the arcing more easily and form higher arc energy, the forms of wear are mainly abrasive wear and are erosion.

  结果表明：表面越粗糙，越易起弧，形成更高的电弧能量，磨损形式主要是磨粒磨损、电弧侵蚀；

• The failure mechanism on tribological properties of TiO_2 thin film is severe plastic deformation, abrasive wear and brittle break.

  薄膜的摩擦失效机理主要为严重塑性变形、磨粒磨损和局部脆性断裂。

• Two typical failures of abrasive wear and cracks for the hook head were studied, and its mechanisms were discussed.

  对钩舌产生的两种典型失效形式—磨损和裂纹进行了详细观察，并对其形成机理进行了探讨。

• The X-ray diffraction was used to determine the structure of the coating surface. At last, the shock abrasive wear test was performed.

  用X射线衍射分析方法测定了镀层表面结构并作了沖击磨料磨损试验。

• Bainite has higher abrasive wear resistance than tempered martensite with equal or higher hardness in hard abrasion, but in reverse in soft abrasion.

  下贝氏体组织在高应力磨料磨损下比相同硬度，或稍高硬度的回火马氏体组织具有较高的耐磨性，但在低应力磨损下表现为不利的作用。

• Granular chips and alternating stress generated during cutting process were the main reason for abrasive wear and cleavage wear, respectively.

  切削过程中产生的颗粒状切屑和交变应力分别是导致磨粒磨损和解理磨损的主要原因。

• And, wear mechanism were mainly abrasive wear and contact fatigue wear.

  磨损机理主要是磨粒磨损和接触疲劳。

• The phenomena of free abrasive wear widely occur in the working components of agricultural machines, earthmoving machines, coal-mining machines, construction machines and others.

  自由式磨料磨损现象在农业机械、工程机械、煤炭机械、建筑机械等工程领域中广泛存在，是导致这些机械与自由式磨料接触的工作部件的主要失效形式之一。

• Impact abrasive wear behavior of electroless Ni-P coating was researched by means of single-pass pendulum scratching test characterized by impact loading.

  利用单摆划痕法的沖击加载特性，研究了N i - P化学镀层的沖击磨粒磨损性能。

• Under lower and medium impact energy, the abrasive wear resistant performance of the steel metioned is higher than that of low alloyed medium carbon wear resistant steel and high manganese cast steel.

  结果表明，在中、低沖击磨料磨损条件下，试验钢的耐磨性优于中碳低合金耐磨钢和高锰钢。

• This paper proposed the criteria to select qualified abrasives for imported granite—cutting machines on the bases of abrasive wear mechanisms and the working principle and conditions of the machines.

  本文在分析进口锯石机工作原理和工况条件的基础上，根据磨料磨损机理，提出了适于进口锯石机的新型石材锯切砂的选材依据；

• Therefore, it's an essential task for us to research the principle of abrasive wear, find the reasons of abrasive wear and invent a kind of effectively and economically method.

  因此研究磨粒磨损的机理，探索造成机器磨损失效的原因，寻求有效而经济的耐磨材料和抗磨技术是一项刻不容缓的任务。

• The influences of different microstructure, silicon content, quenching temperature and cooling rate of the SiCr white cast iron on its abrasive wear performance were investigated.

  研究了硅铬白口铸铁不同组织、不同含硅量、不同淬火加热温度及冷却速度对其耐磨粒磨损性能的影响。

• It favours the parts which is used to resisted the abrasive wear in severe impact work.

  这对承受严重沖击的抗磨料磨损的机件来说，具有重要的意义。

• Its main wear mechanisms are plastic smearing, abrasive wear and fatigue spalling.

  其磨损机理主要有塑性涂抹、磨粒磨损和疲劳剥落。

• The friction coefficient of glass bead filled composite was decreased, wear resistance of the composite was increased, adhesive wear and abrasive wear were main wear behaviors.

  结果表明：加入玻璃微珠的复合材料的摩擦因数降低，耐磨性提高，其磨损行为主要是粘着磨损和磨粒磨损；

• The corrosive environment accelerates strongly crack growth of the composites. After acid and alkali treatment, the wear mechanism is the synthetic action of abrasive wear and fatigue fracture.

  腐蚀环境对材料的裂纹扩展有较明显的加速作用，酸堿处理后材料的磨损机制主要是磨粒磨损和疲劳磨损的综合作用。

• The results show that the abrasive wear loss is mainly controlled by micro-cutting and microcracking. The wear resistance may be determined by the combination of strength and toughness.

  结果表明，材料的磨料磨损主要由显微切削和显微裂纹两个因素控制，材料的耐磨性由其强度与韧性的配合所决定。

• Simulating test and vibration signal analysis for abrasive wear failure of rollings bearings have been made in this paper.

  对滚动轴承磨粒磨损故障进行了模拟试验和振动信号的处理和分析。

• The worn surfaces were analyzed by scanning electron microscope (SEM). It is found that the main mechanism of composites is slight abrasive wear and carbon fibers are worn down and smoothly.

  对应水润滑下复合增强材料的磨损表面主要发生了轻微的磨粒磨损，炭纤维被磨平磨细；

• Basing on the study of the mechanism of wearing of Cu-base shape memory alloy, a new abrasive wear mechanism for some high elastic materials is proposed.

  基于对铜基形状记忆合金磨损机理的研究，对某些高弹性材料，作者提出了一种新的摩擦磨损机理。