英语释义

• polymerized from acrylonitrile

片语

Acrylic c fiber丙烯酸纤维

acrylic staple fiber亚克力棉

acrylic synthetic fiber丙烯酸合成纤维

acrylic acid fiber丙烯纤维

acrylic fibre聚丙烯腈系纤维；[纺] 丙烯酸纤维

blend acrylic fiber共混聚丙烯腈纤维

acrylic coated fiber丙烯酸涂覆光纤

acrylic copolynmer fiber丙烯酸共聚纤维

英汉例句

• this paper analyzes the current situation of domestic acrylic fiber market and reasons why the products are unsaleable and the prices are falling.

  分析了国内腈纶市场现状，指出国内腈纶产品滞销、价格下滑的原因；

• modified acrylic fiber adsorbent was prepared for the efficient treatment of the electroplating wastewater containing heavy metallic ions.

  为了有效地处理含重金属离子的废水，制备了改性聚丙烯腈纤维吸附剂。

• the paper expounds on china's acrylic fiber industry which has established an industrial sys- tem with increased strength and coexisting multi-process routes;

  阐述了中国腈纶工业已建成多种工艺路线并存并有较强实力的工业体系；

• a simple operating, high reliability movable packing machine used in acrylic fiber product lines is designed in this paper by the means of digital and optimum design methods.

  本文采用数字化设计方法和优化设计手段，研究设计了具有操作简易、高可靠性等特点的腈纶生产线移动装箱机。

• cotton yarn , wool yarn , acrylic fiber yarn , dacron yarn and other blended yarn etc.

  棉纱、毛纱、腈纶纱、涤纶纱及其他混纺纱等。

• effects of introducing acetic acid wastewater into acrylic fiber wastewater treatment plant in different ratios on the biodegradability and the effluent cod were discussed emphatically.

  着重讨论了将醋酸废水按不同的比例引入腈纶废水处理场后，对腈纶污水处理场的出水cod以及可生化性的影响。

• using nascn as solvent, flat acrylic fiber was produced by two-step wet spinning process. the selection of spinneret shape and the optimization of process conditions were discussed.

  采用硫氰酸钠为溶剂，湿法二步法工艺生产扁平腈纶，探讨了喷丝板的选型和生产工艺的优化。

• dmac two-step process which produced less sewerage and lower cost was the most preferable process for china acrylic fiber development.

  dmac二步法工艺排污量少、生产成本低，更适合我国腈纶工业的发展。

• steady control problem of lubrication rate on acrylic fiber is explored in view of equipments such as finishing oil pump, pressing roller and steel roller.

  从油剂泵、皮辊和钢罗拉等设备构件运行状态考虑，探讨了腈纶纤维上油率的稳定控制问题。

• pre-treatment of acrylic fiber wastewater by complex process made up of internal electrolysis and fenton oxidization;

  采用铁碳内电解—混凝沉淀预处理工艺处理干法腈纶废水。

• this paper summarized a set of operation methods for pre filtering of acrylic fiber wastewater based on lab research and production practice, which is of guiding significance for production practice.

  文章根据实验室研究和生产实践，总结出了一套腈纶废水预过滤的操作方法，对生产实践具有重要的指导意义。

• tests showed that acetic acid wastewater, when mixed with acrylic fiber wastewater in any proportion, exerted no harmful effects on the operation for the acrylic fiber wastewater treatment plant.

  试验表明将腈纶废水与醋酸废水按任意配比混合，都不会对腈纶污水处理场的运行产生任何不利的影响。

• the design idea of mechanical system is introduced, and the motion relationship between falling acrylic fiber and the swing of funnel is analyzed.

  根据这种关系且匹配各种运动速度设计了控制系统的软件及硬件。

• spinning feature of the top form dry spun acrylic fiber is poor. this article analyzes the reason of the poor spinning feature and give some methods want to improve the quality.

  干法腈纶毛条最突出的质量问题是可纺性能较差，它制约着纺织品质量的提高。

• the application of the adsorption process of active carbon in the purification of sodium rhodanate of wet-spun acrylic fiber was the only technology in our country.

  将活性炭吸附除杂工艺应用于湿法腈纶溶剂硫氰酸钠的凈化，是国内一项独一无二的技术。

• a trademark used for an acrylic fiber or yarns made from this fiber .

  用晴纶纱制造的重量很轻的抗褶皱的丙烯酸纤维。

• different from general acrylic fiber, the profiled acrylic fiber used in the experiments is produced by dry spinning method.

  本文中所使用的异形腈纶纤维不同于普通腈纶纤维，是采用干法纺丝方法制得的。

• the essay discusses the application of acrylonitrile co-polymerization in acrylic fiber production through the analysis over the reaction of dynamics of free-base co-polymerization.

  前言：本文通过对自由基共聚反应动力学的分析，对丙烯腈共聚合反应在腈纶生产中的应用进行了讨论；

• the feasibility for producing high shrinkage acrylic fiber polymer by existing process was studied.

  分析探讨了采用现有工艺生产高收缩腈纶聚合物的可行性；

• the fine structure of blend acrylic fiber has been characterized by using techniques based on x-ray diffraction, electron microscopy, density mea-serement, mercury porosimetry and gas adsorption.

  用x-射线、电子显微镜、密度法、压汞法、和气体吸收法测定了共混丙烯腈纤维的结构。

• production of dry-spinning acrylic fiber plant in 30 kt/y capacity is beset with higher consumption and technological defects.

  国内干法腈纶生产因工艺本身缺陷和规模偏小而陷于困境。

• using nascn as solvent, acrylic fiber was produced by one-step wet spinning process. the effect of spinneret negative draw ratio on fiber formation was discussed.

  采用硫氰酸钠为溶剂，湿纺一步法工艺生产腈纶，探讨了喷丝头负拉伸率对纤维成形的影响。

• analyze the effect of acrylic fiber forming study the conditions after the spinning process.

  通过对干法腈纶纤维成形机理的分析，研究了纺丝过程以后的工艺条件。

• it also puts forward suggestions to promote the competitiveness of domestic acrylic fiber enterprises.

  提出提高国内腈纶生产企业竞争能力的若干建议。

• it is found that plasma treatment can impart the acrylic fiber increased surface roughness and the improved hygroscopicity by the introduction of polar functions containing oxygen and nitrogen.

  结果表明，腈纶纤维经等离子体处理后表面粗糙度增加，大量的含氧和含氮极性基团被引入到纤维表面，使纤维表面吸湿性能得到显着改善。