英语释义

• a meter that measures the flow of electrical current in amperes

片语

thermocuple ammeter热电偶安培表

DAIICHI Ammeter指针式电流表

thermocouple ammeter温差电偶安培计

digital ammeter数字电流表

thermal ammeter热安培计

excitation ammeter励磁电流表

optical ammeter光学电流计

amperometer安培计

induction ammeter感应安培计

rheometer流变仪，血流速度计

thermojunction ammeter热电偶式安培计

英汉例句

• this will connect the ammeter to pin 1 and the voltage source to pins 2 and 3.

  这样即把安培表连接到了管脚1，将电压源连接到了管脚2和3。

• connect the battery and ammeter to the starter as shown in the illustration.

  按说明连接电池和安培计到起动机上。

• and even more interesting is the voltage meter and ammeter become free charge by-product.

  而且更妙的是电压表和电流表成了免费的副产品。

• the guard can be used to isolate the high impedance input lead of the ammeter from leakage current due to voltage sources.

  保护可以用来把安培计的高阻输入引线和由电压源引起的泄漏电流隔离开来。

• a second set of switches (on the model 7158) connects each capacitor to the pico ammeter after a suitable soak period.

  第二组开关（7158型）在经过合适的平稳时间后将每个电容器连接到皮安计。

• it is convenient to include the function of a voltage ammeter and ohmmeter within one instrument.

  把伏特表、安培表、欧姆表的功能集中在一个仪表内是比较方便的。

• since the voltage drop across the ammeter is negligible, essentially all the test voltage appears across r.

  由于安培计上的电压降可以忽略，所以所有的测试电压都出现在电阻r上。

• the effects of input capacitance on current measurements using a shunt type ammeter (figure 2-49) are similar to those for voltage measurements.

  使用分流型安培计（图2-49）时，输入电容对电流测量的影响与电压测量时类似。

• standard class specified in the national standard or more sensitive class. total external resistance including ammeter and wire is less than 0.01ω.

  按照国家标準指定规格等级或采用灵敏度更高的，包括电流表及电线在内的总外阻应小于0.01ω。

• ammeter reactions do not come out, it was missing the firmware.

  电流表反应不出来，那是固件丢失。

• check that the ammeter indicates the specified current.

  检查安培计的读数。

• note that the current must flow through the ammeter in order to reach the circuit.

  注意，电路中的电流必须通过电流表以测量到读数。

• he only had some ammeter and an ampoule.

  他只有一些安培计和一个安瓶。

• to see how changes in source capacitance can affect noise gain, let's again refer to the simplified ammeter model in figure 2-15.

  为了了解源电容如何影响噪声增益，再来看一下图2-15中的简化的安培计模型。

• an infinite wire carrying standard high current perpendicular to the geometric center of the clamp ammeter should be the ideal method for the clamp ammeters calibration.

  钳形电流表理想的校準方法是用标準电流源对一根无限长导线加测试电流，并使该导线垂直穿过被校钳形表的几何中心。

• to measure the offset of a switch card, connect the output of the card to a pico ammeter or electrometer.

  若要测量开关卡的偏移电流，请将卡的输出连接到一台皮安计或静电计。

• to start with, you need to break the circuit so that the ammeter can be connected in series.

  开始时，你需要断开电路，以让电流表可以串入。

• there are two basic techniques for making current measurements: these are the shunt ammeter and the feedback ammeter techniques.

  有两种电流测量的基本技术，即分流安培计技术和反馈安培计技术。