英语释义

• hardening something by heat treatment

片语

flame annealing火焰退火

recrystallization annealing[机] 再结晶退火

high temperature annealing高温退火

bright annealing[机] 光亮退火；非氧化退火

diffusion annealing[机] 扩散退火，均匀化退火

annealing oven[炉窑] 退火炉

spot annealing局部退火

vacuum annealing真空退火

annealing treatment退火处理

batch annealing[机] 分批退火，[机] 箱式炉退火

Bright Annealing[机] 光亮退火；非氧化退火

intermediate annealing[机] 中间退火

thermal annealing加温退火；热处理（退火）

full annealing[机] 完全退火

annealing furnace[炉窑] 退火炉

Spheroidizing Annealing[机] 球化退火

spheroidizing annealing[机] 球化退火

annealing temperature[机] 退火温度；退火点

continuous annealing furnace连续退火炉

isothermal annealing[机] 等温退火，再结晶退火

英汉例句

• According to phenomenon, combined with annealing principle to explain and solve operational some mistakes.

  现根据现象，结合退火原理来解释、解决操作上的一些失误。

• Through various drawing methods and annealing steps, We produces different physical characteristics in wire of a given size.

  通过各种绘图方法和退火步骤，我们产生不同的物理特性，在一个给定大小的丝。

• So the combination of genetic algorithm and simulated annealing could be sufficient to initial alignment for speed and precision.

  因此，将遗传算法和模拟退火算法结合起来，能很好地解决初始对準的速度和精度的问题。

• We also abstractly analyze the parameters of synergetic recognition approach, and purpose a novel parameters optimization method based on simulated annealing mechanism.

  对协同识别中的参数进行了深入的理论分析，并提出了一种基于模拟退火机制的参数优化方法；

• The procedures of heat treatment of steel include hardening tempering annealing and case hardening.

  钢的热处理工序包括硬化、回火、退火和表面硬化。

• A continuous simulated annealing algorithm with global convergence ability is applied to solve this controller parameters optimization design problem.

  采用一类全局收敛的连续模拟退火算法完成了控制器参数的优化设计。

• When the annealing temperature has been reached, the steel should be held there until it is uniform throughout.

  达到退火温度后，钢应当保持在此温度等到全部均匀受热。

• Tension control in annealing demand is very high.

  张力的调节在退火方面要求是相当高的。

• So the simulated annealing algorithm is introduced to solving the material balance equation.

  因此，本文引入模拟退火算法求解物质平衡方程。

• This process is known as full annealing because it wipes out all trace of previous structure, refines the crystalline structure, and softens the metal.

  这过程被称为完全退火，因为它去除了以前组织结构的所有痕迹、细化晶粒并软化金属。

• Automatic pressure relief during annealing process.

  在退火过程中自动进行泄压。

• Manual clamping, the motor drives the CAM to upsetting and butt welding, then annealing manually.

  手动固定夹紧，电机带动多组凸轮进行顶锻对焊，然后再进行手动二次退火处理。

• In 2005, a postdoctoral researcher in his laboratory developed a water annealing process, reconstituting the silks slowly in a humid environment.

  2005年，他实验室的一位博士后研究员利用一种水退火过程在潮湿环境下对丝类进行了缓慢的重组。

• The pooled samples were initially screened for candidate genes for narcolepsy by differential display analysis using annealing control primers (ACP).

  用退火控制引物(acp)的差异筛选分析法对该样本进行候选基因的初筛。

• The process of annealing consists of heating the steel to an elevated temperature for a definite period of time and, usually, cooling it slowly.

  退火工艺的组成为把钢加热到一定温度并保持一段时间，通常再缓慢冷却。

• The effects of annealing on the activity of al alloy anode were studied by measurement of polarization curves and analysis of SEM.

  采用极化曲线测试结合扫描电子显微镜分析技术，研究了退火对铝合金阳极的活性的影响。

• By drying and annealing the material, the scientists mainly remove weakly bound water to make the ceramic fibres form a denser structure.

  通过对材料进行干燥和退火处理，科学家们移去了弱的结合水以使陶瓷纤维形成致密结构。

• Because after annealing line is very soft, corresponding to different wire diameter to use appropriate tension weight, if wire diameter small tension is big, will be the wire diameter and thin.

  因为退火后的线已经很软了，对应不同的的线径要采用合适的张力重量，如果线径小张力大，就会把线径拉细了。

• General continuous annealing export should choose to die than actual need wire diameter 0.0015-0.0035 more appropriate.

  一般连续退火出口模要选择比实际需要线径大0.0015—0.0035比较合适。

• Experiment study of heat transfer mechanism and characteristics in high velocity circulation furnace has been accomplished for batch annealing furnace with high velocity burner.

  针对间歇式退火炉使用高速燃烧器，进行了在高速气流循环下的炉内热交换机构与特征的试验研究。