片语

steady axial flow force流体轴向力

Axial magnetic force轴向磁拉力

axial focusing force轴向聚焦力

axial grinding force轴向磨削力

axial fixture force轴向夹紧力

axial inclination force归轴力

Axial rolling force轴向轧制力

axial compression force轴向压缩载荷

axial electromagnetic force轴向电磁力

英汉例句

• the system adjusts the residual axial force in rotors of a high speed turbomachines by changing the pressure difference between both sides of a balancing disk.

  这套系统是通过调整平衡盘两侧的压力差来调整高速透平机械转子的残余轴向力。

• effects of column axial force and rib stiffener on hysteretic behavior of connections were synthetically considered for the first time during cyclic-loading.

  在循环加载试验中首次综合探讨了柱轴力大小、加劲肋构造措施等对连接性能的影响。

• systematic test study of the properties of axial force caused by asychronouscross rolling is done.

  对异步交叉轧制的轴向力特性进行了系统的实验研究。

• only in this context, in order to use equation (13) of the axial force calculations.

  只有在这个范围内，才能使用式（13）的轴向力计算式。

• some useful conclusions are obtained after analyzing the measuring results about the relation of force and settlement, the distribution of axial force and lateral friction resistance.

  同时对荷载一沉降曲线、桩身轴力和桩侧摩阻力的实测结果进行了分析，得出了一些有益的结论。

• a balance plate is put into the pump head to balance the axial force without lowering efficiency and a good effect got.

  在不降低效率的情况下，在屏蔽电泵的泵头加入平衡盘使轴向力得到平衡，并取得了满意的效果。

• this paper deals with the mechanical behaviors of steel-concrete composite beam and effective width of concrete slab on the axial force and the bending moment together function, based on the past job.

  本文在总结前人工作的基础上，对结合梁斜拉桥中在轴力和弯矩共同作用下的钢—混凝土组合梁截面受力状态和混凝土桥面板有效宽度进行研究。

• and the effect from the axial force has been discussed by the three-dimensional finite element method.

  采用三维非线性有限元法分析了轴向力对校直工艺的影响问题。

• the parametric resonances and internal resonances of beams with axial force and supporting motion have been investigated.

  本文分析了轴向力和支承运动作用下梁的参数共振和内共振问题。

• conclusions ha coated prosthesis can achieve fine fixation, because it helps bone conduction, resists axial force and torsion, and reduces operative risks.

  结论ha广泛涂层股骨假体具有骨传导作用，可抗轴向力和抗扭转力，且手术风险低，能够获得较好的同定。

• the influences of the separating force and axial force of the piercing point bar on the wall thickness of the shell pierced, and on its lateral uniformity are analyzed quantitatively.

  定量分析了穿孔轧制力和顶头轴向力对毛管壁厚及其横向均匀性的影响。

• axial force transmission, distribution of skin friction, tip resistance of pile, as well as tress ratio between pile and soil are changing with pillow.

  研究了褥垫层厚度变化对桩身轴力传递、桩侧摩阻力分布、桩端阻力发挥、桩土荷载分担及桩土应力比的影响。

• pump axial force and radial force by the rolling bearing box to bear.

  泵的轴向力与径向力分别由轴承盒内的滚动轴承来承受。

• these studies, as well as tensile strength and torque / axial force tests confirm that hard lock nuts maintain a stable tightened condition, regardless of the type of impact to which they are exposed.

  这些测验，连同张力和扭力/轴向力测试，证实了强力锁紧螺母无论在何种沖击的影响下，仍然保持一稳定的锁紧状态。

• when the early expansion cone is used to expand solid expandable tubular, the great axial force will be needed and the length of the tube will be reduced considerably.

  早期的膨胀锥在应用于实体管膨胀时，不但需要较大的轴向力，而且存在套管膨胀后的轴向尺寸会有较大的减小等难题。

• the provenance of this theme is the「 analysis of abnormal axial force and solution of bs305 planetary-gear transmission of zl50 wheel type loader」 from guangxi liugong machinery co.

  本论文来源于广西柳工机械股份有限公司委托课题「zl50装载机bs305行星变速箱异常轴向力分析及解决方案」。

• the effect of axial force may be taken into account.

  可以考虑轴向力、转动惯量和剪切变形的影响。

• the relative formulations between limit loads (both axial force and internal pressure ) acting on it are derived while the whole thick-walled tube is led to the yielded state.

  当整个厚壁圆筒达到屈服状态时，推导了在内压力和轴向力联合作用下的厚壁圆筒的塑性极限载荷表达式。

• in addition, it is well known that axial force coefficient denotes the pressure drop across the turbine to a great extent.

  因此，如果知道了轴向力系数，就可由透平的运动状态获得透平前后的压降。

• this article infers the influence of axial force on free frequency of bending vibration-base frequency of the structure: is linear with n/nkp.

  本文通过数值计算推证轴向力对弯曲振动自振频率的影响，并印证了结构的基频与n／nkp成线性关系。

• based on the above, the twin-screw and corresponding kneading blocks were designed, and the axial force occurred when the device in working condition was calculated.

  本文基于以上思想，从双螺桿的设计起步，确定了双螺桿和与之对应的捏合块规格和参数，并对螺桿工作产生的轴向力进行了计算，选择了相应的止推轴承。

• measured q-s curve are back figured by nonlinear optimization approach and model parameters are found simultaneously, then distribution of axial force and skin friction along pile are calculated.

  通过非线性优化算法，拟合实测的q—s曲线，可得到桩土系统的工程力学参数，并由此计算得到桩身轴力及侧摩阻力分布曲线。