英语释义

1. a compacted often brick-shaped mass of usually fine material
a charcoal briquette

片语

briquetting technique[电子]

briquetting screw成型机螺桿

impact briquetting沖压成型

briquetting machine[化工] 压块机

briquetting detail制煤砖

hot briquetting热压，加热成型；热压制团；热团矿

briquetting coal型煤

adsorbent briquetting吸附剂成型

briquetting press压片机

cold briquetting冷压成型

briquetting equipment成型设备

英汉例句

• the results show that the performance of coal briquetting machine and quality of briquette are enhanced with the new construction.

  新的结构提高了型煤机的技术性能和型煤质量，同时降低了设备制造成本和动力消耗。

• the pressure bar of a lead briquetting machine, imported from german, was seriously scratched during its service.

  从德国进口的压铅机压桿在使用中表面严重划伤。

• making biomass briquetting is a quite complicated process. it is influenced by many factors including temperature and stress.

  将生物质压缩成型，是一个相当复杂的过程，除了受到压力、温度的影响之外，还受到多种因素影响。

• the effect factors and some inner varying laws of briquetting are found out.

  进行了一系列的成型实验研究，找出了有关的影响因素。

• this paper analyses the process of coal hot briquetting and points out the way to improve squeeer.

  对煤料的热压成型过程进行了分析，提出了改进挤压设备的途径。

• many kinds of briquette binders developed by the intensive research during the past many years have promoted the development of briquetting technology.

  多年来通过深入研究，多种型煤粘结剂被开发，有利地促进了成型技术的发展。

• a novel two way briquetting structure with two reciprocating pistons was designed.

  设计的往复活塞双向挤压成型机构具有创新性。

• the determined technological process is applied to the continuous briquetting test with the agglomeration ratio reaching 86.5%.

  采用这一工艺过程进行连续成型试验， 成球系数达到86．5％。

• clean coal technologies of high sulfur coal (cchs) include: screening, washing, coal blending, furnace-front briquetting and capturing sulfur in furnace.

  高硫煤的洁凈（cchs）技术包括筛分、洗选、配制、炉前成型和炉内固硫等。

• the way how to improve the design of screw extruder used for hot briquetting process is introduced.

  介绍了热压型焦工艺设备螺旋挤压机设计改进情况。

• the effect of the briquetting pressure and additional amount of diluting agent on the synthesis reaction and products behavior are investigated.

  研究成形压力、稀释剂添加量等参数对反应过程及合成产物性能的影响；

• the hydraulic jack besides uses in the forging and stamping forming, may also use in rectifying, the press mounting, the pack, the briquetting and the clamp and so on.

  液压千斤顶除用于锻压成形外，也可用于矫正、压装、打包、压块和压板等。

• the design and application effect of the horizontal twinroler machine for coal briquetting have been introduced.

  介绍了用于压制型煤的卧式对辊压球机的设计和应用效果。

• the effects of coal from different mines and hot briquetting process parameters on the cold strength of ccb were investigated, as well as the mechanism of acquiring high strength of ccb.

  重点考察了煤种及热压工艺参数对热压含碳球团冷态强度的影响，并探讨了热压含碳球团获得高强度的机理。

• the metamorphic degree of coal, the binder and the briquetting conditions that affect the acting forces were also studied.

  探讨了煤的变质程度、粘结剂和成型条件对颗粒间作用力的影响。

• revealed material size-composition influence law to briquetting quality by study of granularity change of material briquetting and briquetting experiment of different size-composition of material.

  通过对粉煤成型前后粒度的变化研究和不同粒度组成原料的成型实验，揭示了原料粒度组成对型煤质量的影响规律。

• design modification route of large output briquetting machine was put forward based on the transformation experiences.

  结合改造经验和认识，提出大产量成型机设计改进的思路。

• the effect of feed coal particle size on strength of briquette is discussed when different briquetting process and rank of coalification coal are adopted.

  阐述了采用不同成型工艺和使用不同变质程度煤成型时，原料煤粒度对型煤强度的影响。

• this paper introduced the development of briquette production line, including the technical process and the main equipment. the roll type briquetting machine was introduced in details.

  介绍了自行开发设计的一条连续型煤生产线的工艺过程和主要生产设备，重点介绍了对辊式型煤成型机的工作原理及结构特点。

• analyses are made for the influence factors of moulding characteristics such as coal type, size, distribution water content, moulding pressure and briquetting rate.

  分析了影响成型特性的因素，如煤种、粒度、水分、成型压力和成型率等。

• briquette binder as a main part of briquetting technology is of very important effect for the quality and the cost of briquette.

  型煤粘结剂是成型技术的核心部分，对型煤质量、生产成本等起着举足轻重的作用。

• this paper introduced the revised design and relative progresses in hot briquetting coke production.

  阐述了设计上的改进和在生产上取得的突破性进展。

• presented is an orthogonal experiment for optimization study on the composition of compound binder and main briquetting technics parameters of briquette used for metallurgy furnace.

  以湖南金竹山无烟煤为原料，采用正交实验法对冶金炉窑用型煤复合黏结剂各组分的配比及型煤成型的主要工艺参数进行了实验研究。

• in this study, the effects of hot briquetting process parameters on cold strength of the ccb, and the mechanism of the ccb high strength are investigated and discussed.

  本研究重点考察了煤种及热压工艺参数对热压含碳球团冷态强度的影响，并探讨了热压含碳球团获得高强度的机理。

• in applying hot briquetting for isp dross processing, influences of pressure, temperature, time of pressing on strength of hot briquetes have been examined.

  在用isp法冶炼浮渣热压团时，研究了压团压力、温度、加压时间对铅锌密闭鼓风炉冶炼浮渣热压团块强度的影响。

• 「xinyuan」 brand hydraulic coke briquetting machine is mainly used to crush the end of coal or coke at the end pressed into a square or cylindrical pieces such as cake in order to vote in furnace coke.

  「鑫源」牌液压焦煤压块机主要用于把粉碎的煤末或焦末压制成正方形或圆柱形等饼块，以便投炉炼焦。