英语释义

• has cams attached to it

片语

Camshaft Pully凸轮轴轮

breaker camshaft断路器凸轮轴

english Camshaft凸轮轴

CAMSHAFT SPROKET凸轮链轮

camshaft lathe凸轮轴车床

camshaft gear凸轮轴齿轮

tubular camshaft空心凸轮轴

AUTOBOT CAMSHAFT极小凸轮轴

Intake camshaft进气凸轮轴

英汉例句

• so the influence of normalizing treatment (with atomized moisture cooling or strong wind cooling) and tempering treatment on the structure and mechanical properties of the camshaft was investigated.

  论述了正火（雾冷和强风冷却）和回火温度对凸轮轴中显微组织和力学性能的影响。

• engine builders say they have seen more broken motors suffering from the same camshaft damage over the past three years than in the previous 30.

  发动机制造商称较30年前相比，他们发现这三年破车出现同样的凸轮轴磨损情况有所增加。

• on stripping down a damaged motor, the tappets are invariably found to be heavily pitted and bits of metal broken off the camshaft lobes.

  拆解报废的发动机就会发现推桿无一例外地存在严重的麻坑及从凸轮轴凸轮脱落的金属磨屑。

• the camshaft has a cam, on which there is a lob, or bump.

  凸轮轴上有一个凸轮，凸轮上有一个凸角。

• one centrally located camshaft per cylinder bank is driven by a fiberglass-reinforced toothed belt.

  一个位于中央的每缸银行是由凸轮轴驱动的玻璃纤维增强型齿形带。

• camshaft is one of the important parts on the automobile engine.

  凸轮轴是汽车发动机的重要零件。

• install cover for camshaft housing.

  安装凸轮轴室盖。

• this thesis presents the research and design of the software system of the open cnc based camshaft grinding machine.

  本文对基于开放式数控系统的全数控凸轮轴磨床软件系统进行了研究与设计。

• it is a new technology in camshaft production, with a huge developing prospective.

  是新型的凸轮轴制造技术，具有广泛的发展空间。

• others put the outbreak of camshaft failures down to the recent influx of poorly made components from abroad.

  其他人把凸轮轴突然报废的原因归结为最近从国外进口的劣质零件。

• camshaft from the crankshaft through the timing belt or gear or chain drive.

  凸轮轴由曲轴通过齿形带或齿轮或链条驱动。

• the system consists of all designs of camshaft cast mold design and foundry tools design, which have strong completeness and systematicness.

  整个系统涵盖了凸轮轴铸件铸造工艺工装设计的主要内容，具有较强的完整性和系统性；

• rather than using a mechanical device to regulate intake valve opening, fiat uses a hydraulic chamber between the camshaft and the intake valve.

  不是用机械装置调节进气阀打开，菲亚特在凸轮轴和进气门之间用了液压的燃烧室。

• if chain is not satisfactory, remove camshaft sprocket attaching bolt and remove timing chain with crankshaft and camshaft sprockets.

  若正时链不令人满意，则拆下凸轮轴链轮固定螺栓，并拆下曲轴和凸轮轴链轮的正时链。

• company specializing in the production of automotive camshaft has a long history and experience.

  一家专业生产汽车凸轮轴具有悠久的历史和经验。

• the eccentric may be part of the camshaft itself or may bolt to it.

  偏心轮可能与凸轮轴是一体的，也可能是通过螺钉连接的。

• allows faster pumping of oil to the bearings and camshaft for greater protection when starting your engine.

  当您启动发动机的时候，可以更快地把机油泵送到轴承和凸轮轴上，从而能够更迅速地保护发动机。

• in its initial stage the change-of the camshaft is performed.

  在他的初始阶段凸轮轴的转换被执行。

• other possible reasons include problems with the oil pump, rod and main bearing clearances, camshaft end play, or cam bearings and lifters.

  其他可能的原因包括油泵问题，桿和柱轴承之间的空隙，凸轮轴停止工作或者凸轮的方位和升降等。

• when you increase the rpm, however, this configuration for the camshaft does not work well.

  当您增加转速时，但这种配置的凸轮轴不工作。

• remove the camshaft retaining bolt and remove the sprockets and chain as an assembly.

  拆去凸轮轴固定螺栓，并拆去作为一个总成的链轮和链条。

• for the grinding carriage of a camshaft grinder at high speed, mode analysis theory is used to analyze its natural frequency and mode shape.

  以某型高速凸轮轴磨床砂轮架为研究对象，运用模态分析理论对砂轮架的固有频率和振型进行分析。

• therefore, the camshaft must revolve at exactly half the speed of the crankshaft.

  因此，凸轮轴必须以曲轴正好一半的速度旋转。