片语

cantilever girder悬臂梁

cantilever composite beam组合挑梁

long cantilever cap beam长挑臂盖梁

cantilever continuous beam悬臂连续梁

cantilever perfusion beam悬灌梁

cantilever laminated beam悬臂层合梁

overhanging beam悬臂梁，[建] 外伸梁

cantilever r beam悬臂梁

cantilever high beam悬臂高梁

cantilever platform beam挑台梁

cantilever-beam type悬臂式

英汉例句

• bending behaviors of single crystalline nano-copper cantilever beam models with hole are simulated by md using embedded atom potential.

  应用分子动力学方法模拟了带孔纳米单晶铜悬臂梁的弯曲过程。

• the finite-element method(fem) is used to model a cantilever beam with surface bonded actuators and analyze the deformation transfer factors between the actuator and the substrate.

  首先采用有限元法建立了双面粘贴压电元件的悬臂梁驱动装置的理论模型，并通过实验验证了理论分析的可行性。

• the vibration of a cantilever beam on elastic support base is a common engineering problem. it is of important meaning to discuss the issue deeply for aviation, weapons, ship and many other aspects.

  含有柔性基础的梁的振动是常见的工程问题，对该问题进行深入的讨论，在船舶、航空、兵器等诸多工程领域都有应用价值。

• a linear state error feedback control technique is utilized to synchronize two coupling cantilever beam system.

  研究了一类利用线性状态误差反馈控制方法耦合的非自治悬臂振动系统的全局混沌同步。

• active control method for the vibration reduction of flexible cantilever beam with time delay in control is investigated in this paper.

  本文对控制存在时滞的柔性梁的振动主动控制进行研究。

• the bending problem of a cantilever beam made of transversely isotropic piezoelectricity medium under uniformly distributed loading is studied.

  对由横观各向同性压电介质构成的悬臂梁在均匀分布荷载作用下的弯曲问题进行了研究。

• secondly, a slender cantilever beam made of transversely isotropic piezoelectric material subjected to subtangential follower forces at the free end is considered.

  其次，考虑压电材料梁一端固定、一端自由，自由端承受準跟随力（压力方向可在一定的范围内变化，但不超过挠曲线的切线范围）作用。

• a cantilever beam was experimentally studied with this method and the result is consistent with theoretical result.

  以悬臂梁为例进行实验研究，实验结果与理论计算结果吻合较好。

• based on the potential flow theory of liquid and vibration equation of cantilever beam, the free vibration problem of cantilever beam liquid cantilever beam coupled system is analyzed in this paper.

  应用流体的势流理论及悬臂梁振动方程，本文分析了悬臂梁流体悬臂梁耦联系统的自由振动问题。

• the electromagnetic support stiffness and additional damping parameters of the cantilever beam system with parallel electromagnetic and mechanical support were identified.

  支撑刚度参数的识别值在静态工作点附近具有较高的精度，说明该电磁支撑可以实现机械系统变刚度支撑。

• this paper deals with how to determine sturctural strain modes theoretically, and the proof for the monotony of the first order strain mode of a cantilever beam has been given.

  给出了悬臂梁应变模态的解析解，并在此基础上证明了其一阶应变模态的单调性。

• the seven models for the single and composite . faults of a cantilever beam have been investi…

  文中对悬臂梁的单一故障和复合故障等七种模式进行了诊断分析，均获得了正确的诊断结果。

• the result of this test shows that this structure is similar to a vertical bending cantilever beam component.

  试验结果表明，该结构近似于一个悬臂梁弯曲受力构件。

• the linearly tunable fbg that utilizes a cantilever beam is introduced. the strain on the beam has been analyzed theoretically. a formula described the tuning is suggested.

  提出悬臂梁可用于fbg连续、线性调谐，并对悬臂梁的应力分布进行了深入地研究，给出调谐公式。

• aiming at effective on line monitoring of blade crack fault, we studied the natural frequency and forced vibration of a cracked cantilever beam (fig. 1).

  以带疲劳裂纹悬臂梁为例研究疲劳裂纹对叶片固有频率及强迫振动响应的影响。

• making use of the finite elements analysis software - ansys, the vibration situation of a piezoelectric cantilever beam is analyzed, the first three mode analyses results are presented;

  使用有限元分析软件ansys对悬臂梁的振动过程进行模态分析，介绍用ansys软件进行振动模态分析的步骤，给出了前三阶模态分析的结果；

• one is based on cantilever beam and the other is pure bending moment beam.

  目前电阻应变计参数的测量装置主要分为悬臂梁式和纯弯矩梁式两种。

• the method has been applied to the complex model analysis of a sandwich cantilever beam with viscoelastic damping material core and verified experimentally.

  应用上述方法对悬臂约束阻尼层梁的复模态参数进行了分析，并进行了实验验证。

• the cantilever beam is used to testify the methods by numerical calculation and experimental analyses.

  并用悬臂梁的数值模拟和实测结果计算进行了验证。

• then the three indexes are used as the measure for structural damage detection in a cantilever beam and their change laws before and after the damages are summarized.

  以一混凝土悬臂梁为例，用一阶振型比、特征参数、一阶曲率模态差指标进行结构损伤识别的数值研究，总结了特征参数指标在结构损伤前后的变化规律。

• for the first time, a temperature-compensated fbg displacement sensor based on cantilever beam structure has been demonstrated.

  该方案对测量范围和分辨率具有灵活性，非常适用于温度变化情况下的位移传感。

• a model for analyzing the large deflection of an elastic cantilever beam with constraint under uniformly distributed load was established.

  建立了分析均布载荷作用下受约束悬臂梁的弹性大变形三阶段模型。

• in the experiment , the grating is mounted and glued on one side of a cantilever beam made with a material having a relatively large elastic constant .

  在实验中，光栅安装和胶合一方悬臂梁同一种材料具有较大的弹性常数。

• this article had attempted to research continuous system model of the cantilever beam under various excitations, various niose levers and various data amounts of response.

  在对集中质量系统研究的基础上，以悬臂梁为例研究了连续系统模型。

• through the simulation of a cantilever beam in different damage cases, we get the corresponding natural frequencies (samples) and make up the sample aggregate.

  利用悬臂梁的仿真分析，获得各种典型损伤工况下的结构固有频率（样本），组成学习问题的样本集。