carbonization
n. [化学] 碳化;干馏;碳化物
2026-03-20 20:11 浏览次数 21
n. [化学] 碳化;干馏;碳化物
carbonization treatment碳化处理
acieration表面钢化;[化学] 碳化;[材] 渗碳
tension carbonization张力炭化
carbonization time结焦时间
carbonization tower碳化塔
electric carbonization电碳化
coal carbonization焦化
carbonization index积炭指数
carbonization tar半焦化柏油
destructive distillation[化学] 干馏;[化学] 分解蒸馏
surface carbonization表面碳化
concrete carbonization is one of the main reasons affecting structure durability of the concrete.
混凝土碳化是影响混凝土结构耐久性的重要因素之一。
low carbonization trend and strong oil film preservation.
低碳化倾向和较强的油膜保持性。
concrete carbonization can be accelerated by wind pressure, which makes the durability of the section of concrete structure different everywhere.
风压对混凝土碳化的影响是客观存在的,它会导致混凝土构件截面耐久性不等。
time-varying model of reinforcement area at crack sites is built after the influence of reinforcement corrosion and crack change the rate of concrete carbonization is analyzed.
讨论了钢筋锈蚀和裂缝对混凝土碳化速度影响的机理,在此基础上建立了裂缝处钢筋截面积的历时变化模型。
the main way to process local produced coal is carbonization at lower temperature with semicoke, coal tar, coal gas, and so on as the products.
利用陜北低变质煤为原料进行低温干馏,得到半焦及煤焦油、煤气等产品,是目前陜北地方煤化工的主要工艺。
pitch derived carbons were prepared from high temperature pitch and impregnating pitch by carbonization at different pressures and graphitization at 2 500℃.
将高温煤沥青和浸渍剂沥青在不同压力下炭化,在2500℃下对所得沥青炭进行石墨化处理。
through resilience and core sampling drilling, we have examined the concrete intensity and the degree of carbonization and evaluated the safety of the upper part of an integrated building.
采用回弹法和鉆取芯样法,对某综合楼上部结构混凝土强度和碳化深度进行了检测并对其上部结构进行了安全性评定分析。
for example, on paper, wood or cardboard the etching would occur as carbonization (burning) while the surface of a metal might be melted.
例如,在纸张,木头或纸板的蚀刻会出现如碳化(燃烧),而金属表面可能会融化。
in this paper, the carbonization technology and surface modification were studied systematically.
本文对其碳化法制备工艺及表面改性进行了较为系统的研究。
the effects of operating condition of carbonization on structure and properties of carbon aerogels are investigated by orthogonal experiment.
采用正交试验方法重点考察了炭化工艺条件对炭气凝胶结构和性能的影响。
this article follows up the change of lamella structure in pan fiber spinning, preoxidation and carbonization process using electron microscope in order to find the evolution of sheet structure.
为了研究原丝中片层微观组织的演变性,借助电子显微镜,跟蹤了片层组织结构在纺丝、预氧化和炭化过程中所发生的变化。
influence factors of concrete carbonization are analysed in this paper.
本文分析了混凝土碳化的影响因素。
concrete carbonization is not sufficient condition of steel corrosion.
混凝土的碳化不是钢筋锈蚀的充分条件。
at the same carbonization temperature and holding time conditions, different raw materials charcoal heat is not the same.
在同样的炭化温度和保温时间条件下,不同原材料的木炭发热量也不相同。
based on the founded theory, the experiments of concrete carbonization accelerated by wind pressure have been performed by stages.
在已有理论研究的基础上,分期进行了风压加速混凝土碳化的试验,试验结果进一步验证了风压影响的客观性。
with improvement unrefined potassium chloride is directly subjected to carbonization and therefore raises the product quality with similar cost.
新工艺的主要改进为氯化钾原料不经精制而直接碳化,从而在成本相仿的情况下提高了产品档次。
contrast with normal-pressure process, pressurization process has more advantage, such as convenient operation, avoiding carbonization of raw material and stable quality of product.
加压法生产焦糖与常压法比较,具有操作方便,避免原料炭化,产品质量稳定等优点。
carbon content in bamboo charcoal increased with the elevation of final carbonization temperature, in contrast, the contents of hydrogen and oxygen decreased.
不同最终炭化温度竹炭中的碳元素的含量随着炭化温度升高而升高,而氢、氧元素含量则相反;
background: thermofusion device utilized in interventional surgery easily leads to sealing carbonization or blood leaking due to overheat.
背景:介入外科中所用的热封合器械常因加热过度导致封口炭化或漏血,效果欠佳。
the influence factors of carbonization of concrete and structural load are analyzed.
对混凝土碳化和结构荷载的影响因素进行分析。
the polymerization reaction rate of carbonization reached its maximum at 400℃.
添加硫沥青球的炭化缩聚反应在400℃反应速率最大。
the depth of carbonization wood furniture price is not expensive also, and about the general furniture.
深度炭化木家具的价格也并不贵,和一般家具的差不多。
using sodium water glass with super low mode, carbonization and press coating problems during manufacture can be solved.
采用超低模数的钠水玻璃可以有效解决高纤维素焊条的碳化和压涂问题。
carbonization is the use of carbon graphite - graphite seal ring when one of the main reasons.
石墨炭化是使用碳—石墨环时密封失效的主要原因之一。