片语

Center-Distance Continuous Probabilistic Model中心距离连续概率模型

center line distance detail中线距

center distance modification coefficient中心距变动系数

calculated center-distance计算中心距

centre to centre中到中的；中心距

Center-Distance Normal中心距离正态

Installment Center Distance安装中心距

center line distance中线距

Research Center of Distance Education教育研究中心

track center distance轨道中心距离

英汉例句

• the park is located in the east of the master city planning area of xiaogan city. it is next to the international metropolis wuhan, center distance between the two cities is only 60km.

  园区位于孝感市城市总体规划区的东部，毗邻武汉国际大都市，两市中心距离仅60公里。

• dies seat: adopt west germany technology (inlay type), assure the drawing center distance to avoid the wire breakage.

  模座：采用西德技术（镶入式），保证拉伸的中心距，减少断线机率。

• when sailing in waves, ship hull total bending deformation will reduce the center distance of gear backing radially arranged in ship hull.

  船舶在波浪中航行时，船体总弯曲变形会使沿船体纵向布置齿轮机构的轴承支座中心距产生缩减。

• in order to solve the sparseness of ls-svm results and restrain the influence of the sample-outliers, a new method of optimized samples by part samples center distance is presented.

  为了克服ls-svm解非稀疏性的缺点，同时抑制偏差较大的训练样本对海底趋势面构造的影响，提出一种基于局部样本中心距离的训练样本优化方法。

• under certain conditions, this reduction of the center distance will lead to additional radial pressures between two meshing gears in the gearing.

  在一定条件下，这种中心距缩减会导致互相啮合的两齿轮间产生附加径向压力。

• ship hull's sagging and hogging may cause center distance increasing or reducing to longitudinally disposed gear housing.

  船体中垂及中拱弯曲变形会使沿船体纵向布置的齿轮座中心距产生增减。

• this paper deals with the engagement of gears with circular arc profile in normal plane at the presence of errors on center distance and depth of cut.

  本文讨论了法向圆弧齿轮在有中心距偏差及切深偏差时的啮合。

• by using geometry analysis method, this paper educed calculation formula of normal direction gear side clearance when internal gearing involute gear transmission center distance waned slightly.

  通过几何分析的方法，导出了内啮合渐开线齿轮传动中心距略变小时，法向齿侧间隙的计算公式，供齿轮传动设计计算之用。

• cdcpm describes the feature space of model by center distance normal distribution (cdn), and simplifies and improves the hmm efficiently by getting rid of the state transition probability matrix a.

  cdcpm用中心距离正态（cdn）分布描述模型特征空间，去掉了hmm的状态转移概率矩阵a，对hmm进行了简化和改进。

• the paper calculates the center distance compensation equation, which can be used for the longitudinally disposed gear housing, to decide th…

  本文推导了一项适用于沿船体纵向布置的齿轮座的中心距补偿公式。

• the ratio of average chord lengths of the two phases (l1/l2) and mass center distance (d) were used to characterize blends microstructure.

  通过光散射试验和扫描电镜结果讨论了两相平均弦长比（l1l2）以及分散相的质心相关距（d）与拉伸性能的关系。

• based on the principle of gear machining generating method, a modeling method - variable center distance gear modeling method for variable ratio gear sector profile is put forward.

  基于齿轮的范成加工原理，提出了一种变速比齿扇齿廓的定中心距齿轮建模法。

• the conjugate principle of the variable ratio gear with constant center distance and constant contact angle has been analysed.

  研究了定中心距、定啮合角变速比齿轮的啮合原理。

• transportation: distance from the airport (km): 26 from the center distance (km): 0, distance from the guangzhou railway station (km): 3.

  交 通：离机场距离（公里）：26离市中心距离（公里）：0离广州火车站距离（公里）：3。

• appropriate pitch curve designing is a key of regularly working for non-circular planetary gear mechanism with variable center distance which can be used in low speed high torque hydraulic motor.

  合理的节曲线设计是可用于低速大扭矩液压马达的变中心距非圆行星齿轮机构正常工作的关键。

• the selection of center distance and gear ratio distribution for a reducer with double-circular-arc gear will have a direct effect on its size, weight and loading capacity.

  双圆弧齿轮减速器中心距和传动比分配的确定，直接影响减速器承载能力、重量和体积。

• through orthogonal experiment, parameter of back zone draft multiple, roller center distance and roving twist factor are selected.

  并通过正交试验对后区牵伸倍数、罗拉中心距和粗纱捻系数进行了优选。

• it can measure not only the inner diameter, outer diameter and linearity error, but also the center distance between holes, taper and position errors such as coaxality, verticality, etc.

  它不仅可以测量内径、外径和直线度误差，还可以测量孔中心距、锥度和同轴度、垂直度等位置误差。

• in certain conditions, the center distance reduction will cause additional radial pressure of two mating gears.

  在一定条件下，这种中心距缩减会导致互相啮合的两齿轮间产生附加径向压力。