centerline中文,centerline的意思,centerline翻译及用法

2025-10-08 07:01 浏览次数 12

centerline

英['sentəlaɪn]美['sentəˌlaɪn]

n. 中心线

centerline 英语释义

英语释义

  • a line that bisects a plane figure

centerline 片语

片语

centerline shrinkage中线收缩

pivot centerline旋转中心线

Centerline Tangent相切中心线

Shaft centerline井筒中心线

Automatic Centerline自动中心线

centerline method中线法

centerline lighting中心线灯号

forepart centerline楦底面前段中心线

linear centerline线性中间线

centerline 例句

英汉例句

  • measurement of vascular centerline and diameter is a fundamental step in diagnosing vascular diseases and planning minimally invasive surgery.

    血管中心线及直径的测量是血管类疾病诊断和微创介入治疗的重要依据。

  • in order to reduce or eliminate such vibration, it must be provided with counter balanced weights that extend radically from the crankshaft centerline in the opposite direction of the crank arms.

    为了减少或降低这种震动,需要把平衡重量从曲轴中心线沿着曲轴臂相反方向安置其上。

  • never cross the centerline except to pass.

    除超车外,决不超越中心线。

  • slightly left (right) of centerline 50 feet.

    稍偏中心线左(右)边50英尺。

  • after dt, according to the local character of the centerline voxels, the initial centerline points is extracted.

    然后根据中心路径体素的局部特征进行初始中心路径点的选取。

  • according to jenkins, the winter-solstice point and the centerline of the galaxy will line up exactly on dec. 21.

    根据他的观点,冬至点将在12月21日準确地落在银河中心线上。

  • an implementation principle using this mechanism design is demonstrated by which the chassis centerline can approach the leading line gradually through continuously adjusting the chassis posture.

    论证了在这种机构设计下通过不断调整底盘姿态的方法可以让底盘中心线逐渐与引导线重合的实现原理。

  • create the illusion of attachment! rather than abut letters, leave a gap, then make a flowing centerline that draws the eye smoothly around.

    营造出另外一种视觉上的错觉!两个文字分开一点,留点空间,然后画出一条流动般的中心线,吸引着视觉的平滑效果。

  • a new approach for road centerline semi-automatic extraction from aerial images is proposed.

    提出了一种新的从航空影像上提取道路中心线的半自动方法。

  • the centerline of elastic rod or elastic filament can be abstracted as space curves to deal with them by the knowledge of the theory of space curve and differential geometry.

    由于弹性桿的中心线或弹性细丝可以抽象成空间曲线,然后根据空间曲线论和微分几何的知识进行处理。

  • crews will close all lanes of sr 530 from 7am to 5pm on friday and saturday, august 20 and 21, between both entrances to oso loop road to install the solar studs in the centerline of the highway.

    八月二十日和二十一日,也就是周五和周六的早七点到下午五点工作人员将关闭所有sr530路段的通道,在osoloop路的两个入口之间把太阳能道钉安装在高速公路的中心线位置。

  • the entry side guide of coilers aligns strips to the centerline of mills and then holds and sends them into pinch roll unit.

    卷取机前侧导板的作用是把带钢对準轧制中心线送入夹送辊,并在进入夹送辊时导板夹持带钢以减少钢卷的塔形。

  • predictions have been made and compared with experimental data pertaining to the centerline velocity decay and wall static-state pressure variation.

    预测了壁面压强和轴心速度分布,并与实验数据进行比较,计算值与试验值吻合很好。

  • you can test this by making the circle go exactly through the centerline and then examine the resulting blend surface in the right view.

    你可以测试,制作一个精确地通过中心线的圆,然后用测试结果在右视图混合曲面。

  • minimum dimension from centerline of valve to base of floorstand when ordered with position indicating floorstand.

    如果订购地轴承架,则最小长度尺寸为阀门中心至地轴承架底座的长度。

  • use your front hand to pull the mast across the centerline and into the wind until you look through the sail window.

    前面那只手把桅桿拉过中心线,让风进来,直到你可以看见风帆上的窗口为止。

  • it is found that the「 delamination always takes place along the centerline segregation band in pipe-line steel produced by continuous casting and then controlled rolling.

    初步研究发现,对由连铸然后经控制轧制生产的管线钢层状撕裂几乎总是沿中心线偏析带发生。

  • just eyeball the centerline as well as you can, and drill a 3/16 hole through one wall of the tubing only.

    只要眼球的中心线,以及可以,并鉆一个3 / 16孔通过一名管壁只。

  • foremast shall be installed on the centerline of ship」s stem.

    前桅安装在船首中心线上。

  • the objective is to verify the predictions of engineering beam theory in so far as that theory defines the centerline deflection and extreme values of the normal stress.

    实验目的是证明现行的工程梁理论,这种理论定义了中心线变形和普通应力的极值。

  • in the course of drawing process, the process interference and defect take place because of the difference between the centerline of concave die and the trace of moving direction.

    结晶器铜管在引仲加工过程中,由于凹模中心线与机床运动方向轨迹线不同,造成加工干涉和产品缺陷。

  • you can specify wing attributes including camber and centerline sheeting of an airfoil.

    你能够标示翅膀归结于包括中凸形和机翼的中心线护墻板。

相关热词