英语释义

1. the casting of metal in a rapidly revolving mold —used especially of the casting of pipe in which a rotating tube serves as mold

片语

centrifugal infiltrate casting离心渗透注浆法

centrifugal investment casting离心熔模铸造

centrifugal continuous casting离心连铸

centrifugal E casting machine离心式浇铸机

centrifugal slip casting离心注浆成型

centrifugal E casting pipe离心铸管

centrifugal pipe casting离心铸管

centrifugal pipe casting machine离心铸管机

Centrifugal Pipe Casting Technique离心铸管工艺

英汉例句

• the material of metal mould, the structure characteristics of a type connector metal mould and the influence on mould for centrifugal casting have been introduced .

  本文介绍了适合于制作离心铸造用金属模的材料和a型接口金属模的结构特点及其对模具的影响。

• usage: it is applicable for centrifugal casting of kinds of alloy ornaments, craftworks and etc…

  用途：适用于生产各种合金饰品、工艺品等离心铸造。

• in the light of application to centrifugal casting machine, working principle of soft starter is analyzed and the advantage of this new energy-saving technique of soft starter is presented.

  分析软起动器的工作原理，结合在离心铸铝机的应用，阐明软起动器这种新型节能技术应用在三相异步电动机上的优越性。

• although there are a lot of the fabricating techniques of functionally gradient material (fgm), the centrifugal casting method is more effective, cheaper and easier to operate.

  虽然梯度功能材料的制备方法很多，但效率较高、成本较低、操作较简单的方法是离心铸造法。

• the centrifugal casting processing and wear resistance of of carbon-steel/high-cr-cast-iron bimetal composite were studied.

  研究了碳钢/高铬铸铁双金属复合材料的离心铸造制备工艺及其耐磨性。

• the result showed that the centrifugal casting made the wc particles appear gradient distribution, the hardness of composites displayed gradual lower inward, and the transition zone was strengthened.

  结果表明，离心铸造使wc颗粒呈梯度分布，硬度由表及里呈现逐渐降低的趋势，过渡区得到强化；

• described in the article is the trial of the dual-liquid centrifugal casting process to produce clad tube with carbon steel as outer case and hi-chromium casting iron as inner case.

  介绍了采用双液复合离心铸造工艺浇铸以碳钢为外套、高铬铸铁为内套的双金属套筒的工艺试验情况。

• the development process and status, and further research directions of fgms by centrifugal casting are comprehensively discussed in this paper.

  本文对离心铸造法制备梯度功能材料的发展过程、研究现状及今后研究的方向进行了综合评述。

• in the common centrifugal casting condition, the free solidification constriction of hss roll was difficult, that accelerated the crack source expanding.

  裂纹源萌生后，在离心铸造系统长时间工作环境下，轧辊不能自由凝固收缩，促进裂纹的扩展。

• themodel could be used to predict the effects of insulting materials parameters on the inner layer hardness of roll during heat treatment for centrifugal casting high speed steel roll.

  用于预测离心铸造高速钢复合轧辊热处理时，保温材料参数对轧辊内层硬度的影响；

• one of keys of production of centrifugal casting pipe of s. g. iron is continuous and fast delivery of qualified base iron with proper chemical composition and temperature.

  应用离心铸造工艺生产球墨铸铁管，连续快速提供化学成分和温度均合格的优质铁液是生产的关键环节之一。

• in this papers , the composition of forging and rolling machine roll sleeve is scientifically designed, the centrifugal casting and heat treatment process of roll sleeve are researched.

  对锻轧机辊环的化学成分进行了科学设计，对辊环的离心铸造工艺、软化退火工艺、淬火工艺和回火工艺进行了深入研究。

• the centrifugal casting process of high aluminum-zinc alloys was investigated through products.

  结合产品试验了高铝锌基合金的离心铸造工艺。

• the hardware system structure and main functions of monitoring system of centrifugal casting machines based on inverter technology were introduced.

  介绍了基于变频技术的离心浇铸机控制系统的硬件系统构成和主要功能，给出了系统监控画面设计。

• the designs of the water-cooled crucible for metal melting in arc skull furnace and its water-cooling system and the centrifugal casting mechanism are all generalized.

  对电弧凝壳炉熔炼的水冷坩埚及其水冷结构、离心浇铸机构的设计进行了总结。

• the reels have infinite anti-reverse, centrifugal casting brakes, and a solid aluminium body frame.

  角子机具有无限反逆转，离心铸造制动器，以及坚实的铝制车身框架。

• as a highly efficient and low-cost special casting method, horizontal centrifugal casting occupies a decisive position in material molding methods.

  卧式离心铸造作为一种效率高、成本低的特种铸造方法，在材料成型方法中占有举足轻重的地位。

• hch-201 unsaturated polyester resin is designed for centrifugal casting molding glass pipe (hobas pipe) design of the structure layer resin is a low viscosity, medium reactivity of o-benzene resin.

  201不饱和聚酯树脂是专门为离心浇铸成型玻璃钢管道（hobas管）设计的结构层树脂，是低粘度，中等反应性的邻苯型树脂。

• assembly and structural features of w type cast iron drain pipe in centrifugal casting were introduced. comparison with other types of drain pipes was conducted.

  介绍了新型（w型）管箍式离心铸铁排水管的组成、结构特点与其他类型排水管的比较。

• vertically centrifugal casting of tie-in has been introduced, which includes principia of design and technological coefficient.

  介绍了管接头铸件立式离心铸造工艺，其中包括设计原则和工艺参数。

• defect analysis in cylinder sleeve with high performance by centrifugal casting in metallic mold is made. measure to technological improvement and effect obtained are introduced.

  对金属型离心铸造高性能气缸套的缺陷进行了分析，介绍了工艺改进措施及取得的效果。

• the results show that the greater casting thickness, rotating speed and radius of centrifugal casting are, the greater the filling ratio are.

  试验结果表明，试样铸件厚度越大，离心半径越大，离心转速越高，铸件型壳的充填率越高。