片语

circular-arc teeth圆弧针齿

circular-arc planet圆弧行星

circular-arc tooth圆弧齿

circular-arc graphs环弧图

circular-arc cracks圆弧裂纹

circular-arc gear圆弧齿轮

double circular-arc双圆弧

circular-arc rule曲线板

circular-arc canyons圆弧形凹陷地形

英汉例句

• it was proved by theories and experiments that the load capacity of double circular arc spiral bevel gearing is higher than involute gearing「s.

  实践证明，双圆弧弧齿锥齿轮传动具有比渐开线齿轮传动高得多的承载能力。

• this draws a circular arc at (150, 150) on the page (relative to the bottom-left corner), of radius 10, from angle 0 to angle 360, or a full circle.

  这段代码将在页面的 (150,150) 位置（相对于左下角）绘制一个半径为 10的圆圈，从0 度到360度（即完整的圆圈）。

• overlap the shaping rollers」 circular arc excessively, decrease partial betweenthe shapes excessively as far as possible, it will benefit to briquette better.

  将成型辊的圆弧过度重合，使得成型印之间的过度部分尽可能减小以利于压块更好成型。

• tangential continuity [c1 or g1] is the next level, defined by a circular arc creating a relatively smooth transition between these surfaces.

  相切（tangential）连续性[c1org1]则是下一个层次，指的是建立一个连接这些表面间的平滑的圆弧过渡。

• through the calculation of the finite element method(fem) models for double circular arc profile spiral bevel gear, the stress changing pattern along the length of the tooth is obtained.

  用有限元方法，对双圆弧弧齿锥齿轮沿齿长方向齿根应力进行了计算。通过应力计算结果的分析，得出了凸、凹两齿侧应力沿齿长的分布规律。

• the model uses the curved vortex elements on the circular arc as the basic discrete elements for trailed filaments and utilizes the free wake extension to form an adaptive far wake downstream.

  该模型采用圆弧涡元作为基本涡元，并依据自由尾迹涡线确定远尾迹形状以使远尾迹更接近实际和自由。

• pump body surface wear is mainly suction area period of circular arc face. if appeared mild wear, but oil shixiu grinding deburring after use.

  泵体内表面磨损主要是吸油区段圆弧形工作面。如果出现轻微磨损，可用油石修磨去毛刺后使用。

• it includes the calculation of pure circular arc profile of the planetary gear by least square method, model design, model performance test and relevant analysis.

  其中包括根据最小二乘法原理设计行星轮的纯圆弧齿廓的计算方法，样机的设计、试验及分析。

• the structure parameters have some relation with the vibration behaviors for the reducing box with two stage split flow novikov gear of with double circular arc tooth profiles.

  二级分流式双圆弧齿轮减速箱结构参数对其振动特性有一定的影响。

• the circular arc gear drive is one kind of axial conjugate gear drive which meshes in points. the movement transmission depends contact mark along the end motion to realize.

  圆弧齿轮传动是一种轴向共轭、点啮合制的齿轮传动，运动的传递依靠接触迹沿轴向移动实现。

• a circular arc fixed plate has the angle scale, and one side of the circular arc fixed plate is prolonged as the caliper head which provided with two cylindrical pins.

  圆弧形固定板有角度刻度，并将一边延长作卡尺头，上边装有两个圆柱销。

• the circular arc wiring duct also called it separates wiring duct /the insulation wiring duct /seal type wiring duct /arc the circular arc wiring duct /walk wiring duct.

  圆弧线槽也称之为圆弧型隔线槽/绝缘线槽/密封式线槽/弧线槽/走地线槽。

• by using circular arc project, the relative positions of the conic curves and other spatial geometrical elements can be solved for simplified and precise drawings.

  用圆弧投射法解决圆锥曲线与其它空间几何要素的相互位置问题，可使作图更为简练、精确。

• if the section is a circular arc in the spatial slanting plane, the circular arc is the extremely reasonable bore hole path curve for slide drilling in minimum curvature method.

  在此方法中，假设井段是空间斜平面上的圆弧，对于滑动鉆进方式，圆弧是非常合理的井眼轨迹曲线。

• after the interposition of the type value points, the least square method of fitting a circular arc in constrained condition is employed.

  型值点插补后，采用带有约束条件的最小二乘圆弧拟合。

• two kinds of surface notch:rectangular and circular arc profiles liave been tested.

  试验了两种即矩形和圆弧形剖面的表面缺口试样。

• the engineering fracture analysis and evaluation of the outside surface crack in the circular arc transitional region of the head flange of rpv are also completed.

  对同样设备的上法兰圆弧过渡区的外壁表面裂纹在典型的核电站工况下作了工程断裂分析和评定。

• in this paper, a new method for constructing a segment of circular arc is presented by using the vector valued continued fractions, and the center and radius of this arc are given.

  文章利用向量连分式构造的参数有理函数快速、简便地生成了平面上的一段圆弧，并给出了它的圆心坐标及半径。

• double circular arc helical gears(w-n gearing) has been widely used in many fields, due to one of its advantages in flexible design of tooth profile parameters.

  双圆弧齿轮是一种齿形参数设计灵活的齿轮传动形式，得到了广泛的应用。

• fe circular arc sliding method.

  有限元圆弧滑动法。

• the circular arc automatic door is reciprocating swing, and its motion parameters are the number of swing per minute, the size of the swing angle and the travel speed ratio coefficient.

  圆弧形自动门是往复摆动，其运动参数是每分钟摆动次数、摆角大小和行程速比系数等。

• based on finite element model, this paper investigates the frequency characteristics for the first and second modes of the circular arc tube.

  利用所建立的有限元模型，这里，对圆弧型弹性弯管一、二阶频率特性进行了详细研究。

• its basic gear tooth profile is double circular arc spiral bevel gear tooth profile.

  双圆弧弧齿锥齿轮是将点啮合制圆弧齿轮传动形式运用到锥齿轮上的成功例子。

• in this paper, the equation of the tooth surface of double circular arc profile spiral bevel gear is deduced by means of space grid principle.

  双圆弧弧齿锥齿轮是将点啮合制圆弧齿轮传动形式运用到锥齿轮上的成功例子。

• in the classroom of college physics the potential distribution of an arbitrary linear charged circular arc is a typical and meaningful electrostatics problem.

  在静电学中，任意线电荷圆弧的空间势分布是一个典型而有意义的非线性物理学问题。