片语

a circular planar ring平面圆环

traffic circle道路的圆形交叉路口；圆环；环形交叉路口，环岛；环形交通枢纽

circular spiral ring packing圆形螺旋圈填料

circular distributor ring环形整流子

non-circular elastic ring非圆弹性环

cirque圆环；天然圆形剧场；盆地谷

Circular strengthening ring圆环型加强圈

circular stiffening ring加强环

circular planar ring平面圆环

circular-ring energy dissipater圆环耗能器

circular sprinkler ring-shaped sprinkler环形喷灌机

英汉例句

• the head center of the soldering iron head is provided with a centering pin positioned at the center point of the circular ring circle and rising a little altitude than the circular ring plane.

  在所述烙铁头的头部中心有一定心针，该定心针位于圆环的圆心处，高度略微高出圆环平面。

• there is no way that you could irradiate a crystal of nickel with a single beam of x-rays and get that circular ring pattern if the electron beam were behaving as a particle beam only.

  没有什么其他的途径,可以让镍晶体发射,单束x光来,继而得到环状图案,如果电子束,是以粒子束形式出现的。

• a permanent magnet with a wide pole arc circular ring structure is arranged on the rotor and fixed with a non-magnetic thin-wall outer ring.

  转子上装有宽极弧圆环结构的永磁体，永磁体用非磁性的薄壁外圈固定。

• a circular ring sector with appropriate radii and central angle may be taken as approximate developing pattern of a coil of an undevelopable right helicoid.

  具有适当半径和中心角的圆环扇形可取为不可展正螺旋面一个导程的曲面的近似展开图。

• when stiffness of ring is calculated by using castigliano theorem, the ring is simplified to be a circular ring with constant cross section.

  在计算夹紧环的刚度时，将夹紧环简化成等截面圆环，应用了卡氏定理。

• an experimental study of inlaid circular ring under impact force on interior boundary is also conducted. the result shows that the stress is distributed within a limited scope.

  对内边界受沖击力作用的镶嵌圆环也进行了实验研究，结果表明，应力分布局限在有限范围内。

• in the case of circular ring shells, this equation may be simplified into the equation given by f.

  当旋转壳是圆截面环壳时，这些方程简化为f。

• combining practical matters, a method of the stress calculation of circular ring plates under press loading using flat circular plates formula was introduced.

  本文结合实际问题，给出了利用《应力应变公式》中的等厚平圆板公式对受压环板应力的理论计算方法。

• research on the production of circular ring part by liquid forging technology with the material of za27alloy was stated. optimal technological parameter of this method was determined.

  叙述了用za27合金采用液态模锻工艺生产圆环零件的研究，确定了za27合金液态模锻最佳工艺参数，对常规铸造件和液态模锻件组织特征进行了对比分析。

• the essay analyses the nonlinear problem of large deflection of circular ring plate.

  本文分析研究了环形薄板的非线性问题。

• the research on microstructure pattern and mechanical properties of the circular ring parts by liquid forging experiment under different specific pressures and casting temperatures were stated.

  通过圆环零件的液态模锻成形实验，对在不同比压和浇铸温度条件下，锻件的微观组织形貌和力学性能进行了分析研究。

• can be replaced without needle injection head : no needle injection by the injection of the top head , piston, and a circular ring formed …

  可更换的无针注射头：无针注射头由注射顶端、活塞和一个圆形密封圈组成…

• an experimental study of inlaid circular ring under impact force on interior boundary is also conducted. the result shows that the stress is distributed in a limited scope.

  文中还对内边界受沖击力作用的镶嵌圆环进行了动光弹实验，结果表明，应力分布局限在有限范围内。

• a dynamic response of circular ring in different supported conditions under impact load is investigated by a dynamic photoelastic method in this paper. some experimental results are presented.

  本文用动光弹方法研究沖击载荷下不同支撑条件的圆环的动态响应，给出部分实验结果。

• the flexural vibration of a circular ring that is of axis symmetry is analyzed and calculated, the solid frequency expression of the flexural vibration is obtained.

  对一类轴对称圆环的面内弯曲振动进行了分析计算，给出了圆环面内弯曲振动固有频率表达式。