英语释义

1. an apparatus used in spinning cotton and other fibers that coils the sliver by feeding it through a tube attached to an annular revolving plate into oppositely revolving cans

2. one that makes coils (as by winding wire to form springs)

片语

coiler stand卷取机支座

coiler r蛇形管

coiler head卷取机卷筒

coiler furnace卷取炉

recoiler卷取机；重绕机；重卷机

Strap Coiler绕线器

down coiler卷取机

winding蜿蜒曲折的

coiler area卷取区

Garret coiler加勒特式卷取机

英汉例句

• the principle, normal troubles and precautions for bell - jar wire coiler are introduced.

  介绍了钟罩式卷线机的工作原理 、 常见故障及预防措施.

• the development of modern coiler system is mainly aiming at improving the yield and quality of product.

  现代热轧卷取机的发展主要着眼于提高产品的产量和质量。

• the process can overcome the defects generated on the disc shear by the strips when the tension is shifted between the coiler and the tensioning piston owning to the shutdown of the coil separating.

  可以解决因分卷停机在卷取机与张力活套间等切换张 力时带钢在圆盘剪上产生的缺陷。

• the control system of down coiler and a simulation model were introduced.

  研制了地下卷取机的控制系统,并制作了仿真模型.

• the status and composition of garlert coiler are introduced, four kinds of coil transmission device of it compared, the developing trend of large coil analyzed.

  介绍了加勒特卷取机的设备现状、组成，对该设备的四种盘卷移送装置进行了比较，分析了大盘卷行业的发展趋势。

• after operating the coiler machine for the company’s beautyrest mattress, he moved into maintenance and kept all of the plant’s machinery humming.

  后来就负责公司beautyrest床垫的卷线机，然后就负责机器维修保养工作。

• coiler is one of the most important assistant equipment for steel rolling.

  卷取机是一种重要的轧钢辅助设备，其用途是把轧制后的成品带钢卷成钢卷。

• cold coiler is used cold roll strap steel unit and acid washing, anneal, cutting, coating of strap steel.

  张力卷取机一般用于冷轧带钢机组和带钢的酸洗、退火、剪切、涂层等精整机组。

• by analyzing and calculating the capacity of coiler can, the factors that influence the maximum capacity of coiler can are discussed in the paper.

  通过对圈条容量的分析与计算，得到圈条器容量的计算公式，进而分析各因素对最大圈条容量的影响；

• analyze aluminum foil mill coiler constant tension control, supporting to have got the actual meaning with the rolling mill maintenance the production control.

  分析了铝箔轧制恒张力控制，对箔卷轧制生产控制和轧机设备维护有实际的意义。

• faults in coiler and setting of coiler base.

  圈条器故障、圈条器底盘工艺设置不当。

• thus continuous coiler unwinds the wire from immediately preceding block to give a dead cast coil.

  这样连续缠卷装置能展开刚刚从前一鼓轮处获得的金属线,并将其固定缠绕.

• constant tension control is very important for electrical control system of coiler in cold continuous rolling mill.

  在连续冷轧机组卷取机电气控制系统中，卷取机恒张力控制十分重要。

• the paper introduces the structure feature of a coiler with three mitre type reel. this reel has three kinds of diameters and its tension range can be up to 20 times higher.

  介绍了具有三斜楔式卷筒的卷取机结构特点，卷筒直径有三种规格，卷取最大张力与最小张力比达20倍。

• taking finishing and coiler area as examples, the main control functions of basic automation system are properly introduced.

  以精轧区和卷取区为例，对基础自动化系统的主要控制功能进行了重点说明。

• the functional configuration of basic automation system is presented. taking finishing and coiler area as examples, the main control functions of basic automation system are properly introduced.

  介绍了轧机区基础自动化系统的功能配置。以精轧区和卷取区为例，对基础自动化系统的主要控制功能进行了重点说明。

• based on theoretical analysis and experiments, the carrying capacity of main driver system of coiler has been analysed, and the hollow shaft of the drum which has a complicated structure studied.

  建立了带钢被夹送辊、卷筒和助卷辊弯曲时，带钢的一次弯曲和二次弯曲力学模型和数学模型，分析了卷取机的主要力能参数和结构参数。

• size of the coiler trumpet not adjusted to the hank.

  圈条器喇叭口的尺寸与梳棉条的支数不合适.

• the paper analyses the cause of telescopic coils arisen and expounds the way to shrink through modifying the coiler basic automation.

  本文分析了钢卷塔形产生的原因，论述了如何通过修改卷取机基础自动化的方法，减少钢卷的塔形。

• at present, coiler control system mostly adopts general fed adjuster.

  目前, 卷取机控制系统大多采用常规的pid调节器.

• by test and analysis, the direct reasons leading to failures are the defaults in designing coiler mandrel diameter change and controlling hydraulic system program but not the system parts themselves.

  通过测试与分析，排除了液压系统元件本身的问题，认为卷筒变径设计缺陷和液压系统程序控制缺陷是故障产生的直接原因。

• this paper introduces the design principles about basic automation system of down coiler consisted of speed control and tension control in tisco hot strip mill.

  本文介绍了太钢热轧厂卷取机基础自动化系统的设计思想。内容包括速度控制和张力控制。用此方法编制的程序现已在太钢热连轧厂得到运用。

• this provides theoretic and experimental base for developing high-level step-by-step control system and improving installation of coiler and quality of production.

  为研制高水平的热轧卷取机步进控制系统，提高卷取机装机水平和卷取质量提供了理论基础与实验依据。

• continuous coiler is used to get the non - stop production in a wire drawing plant.

  连续缠 卷装置 令拉丝工厂生产连贯.

• coiler of the paper, and in raw material processing.

  纸管卷取机，和带料加工。