片语

cold-rolled strip冷轧带钢

cold- rolled factory冷轧厂

cold-rolled coils冷轧薄板

cold-rolled carbonsteel冷轧碳钢

Cold-Rolled steels[机] 冷轧钢

cold-rolled steel[机] 冷轧钢

cold-rolled bar余热处理钢筋

cold-rolled mill冷轧机

cold-rolled copper冷轧工业纯铜

英汉例句

• The hot rolled microstructure, texture and properties of an ELC steel hot rolled in ferrite region, cold rolled and annealed were studied.

  通过铁素体区热轧工艺生产ELC钢的工业试验，研究了一种ELC钢的热轧组织，织构及性能。

• The effect of annealing temperature on fibrous texture of cold rolled IF steel sheet rolled from strip hot rolled in ferrite region was investigated.

  研究了铁素体区热轧if钢经冷轧后，不同退火温度对丝织构的影响。

• A fast border-detection algorithm named local border search algorithm was presented here, and applied to an on-line surface inspection system for cold rolled strips.

  提出一种快速的边部检测算法，即边界局部搜索算法，并应用于冷轧带钢表面缺陷在线检测系统。

• We use hot-rolled steel to produce cold rolled coils and other high-value added products at the Lipetsk plant and VIZ-Stal.

  我们利佩茨克工厂和维兹工厂里使用热轧钢板生产冷轧板卷和其他高附加值产品。

• Mechanical properties testing, SEM and TEM was used to study the effects of cold rolled reduction and aging temperature on the cohesion of the weak interface of DISC.

  通过力学性能测试、扫描电镜及透射电镜观察，研究了冷轧压下量及时效温度对内生复合钢板弱界面结合强度的影响。

• The reduction rule of cold rolled narrow steel strip by usual method, It「s rolled energy consumtion isn」t the least usually.

  按一般方法设计的冷轧窄带钢压下规程，轧制能耗不一定是最小的。

• This paper analyzes the reasons leading to uneven thickness of cold rolled strip steel, problems existing in AGC control system and component and application prospect of intelligent technique.

  分析了冷轧带钢厚度不均产生的原因、A GC控制系统存在的问题及智能技术的构成和应用前景。

• Due to the fact that most of the cold rolled steel sheets are with a brushed surface and it's not advised to be use for mirror electro coating.

  但由于本钢浦项产冷轧板一般为麻面板， 皱面（防滑）镀铬，镀镍的表面处理完全胜任，但要求所以要求镜面电镀的客户，需要谨慎使用。

• The method for analysis and comparison of level of the standard gauge tolerance for normal products of the cold rolled steel sheets is put up.

  提出了一种冷轧薄钢板常用产品标準厚度公差水平进行分析比较的方法。

• In order to improve the recognition rate of cold rolled strip surface defects, a new method of feature extraction was investigated for defect images based on Independent Component Analysis (ICA).

  为了提高冷轧带钢表面缺陷识别率，提出基于独立成分分析(ICA)的缺陷图像特征提取方法。

• To meet uninterruptedly increasing in the demand for the cold rolled steel sheets and to meet the technological demand of continuous annealing, the production of ultra-low carbon steel is increasing.

  为了满足市场对冷轧薄板钢需求量的不断增加和连续退火工艺要求，超低碳钢生产也在不断增加。

• The principle and the design of the cold rolled manufacturing process of skew tooth rollers for drawing frames are introduced.

  介绍了并条机牵伸罗拉斜齿沟槽的冷轧加工原理及其装置的设计方法。

• The effect of speed ratio on the texture of non-oriented cold rolled low silicon steel sheet was investigated after cross shear rolling at different speed ratios.

  选取低硅无取向硅钢常化态板材，分别在不同速比下进行异步轧制，考察了速比对低硅无取向硅钢冷轧织构的影响。

• Chatter mark on the surface of the cold rolled or skin passed steel strips will seriously depress the product quality.

  冷轧平整带钢表面的振动纹严重影响了产品的质量。

• Tinned sheet is cold rolled sheet whose surface is electroplated with a layer of uniform and dense tin.

  镀锡板就是在冷轧板的表面电镀一层均匀致密的锡层。

• Thin-layer electrochemical studies of the underpotential deposition(UPD) of Bi and Te on cold rolled silver substrate have been performed.

  研究了冷压银衬底上铋和碲的欠电位沉积薄层电化学行为。

• STRIP: Flat rolled steel used in the forming of cages. Hot or cold rolled to specified thickness, slit to specified widths and wrapped into coils.

  钢带：卷起来用于加工保持架的带型钢材。通过热轧或冷轧达到一定的厚度，然后切割成一定的宽度并卷成钢带卷。

• It is a key factor of choosing master material for cold rolled ribbed bars which affect the final product properties. The technology development of wire rod for cold rolled ribbed bars is introduced.

  冷轧带肋钢筋母材的选用是影响冷轧带肋钢筋性能的关键因素，介绍了冷轧带肋钢筋专用母材的技术开发。

• Surface damage of cold rolled aluminum strip was investigated by observation of roiled surface with a scanning electron microscope.

  通过对轧后铝板表面的扫描电子显微观察，就冷轧铝板表面损伤进行了探讨。

• The results show that using high and low slab reheating temperature technique, the texture component of hot rolled grain oriented silicon steel is significantly different from that of cold rolled one.

  采用取向分布函数及取向线分析方法对取向硅钢高温和低温板坯加热工艺的热轧及冷轧钢板织构进行了研究。

• However, hot dip galvanizing industry has been developed rapidly in recent thirty years with the rapid development of cold rolled strip.

  然而，热镀锌工业是近三十年来伴随冷轧带钢的飞速发展而得到了大规模发展。

• The process of annealing of cold rolled coil is carried out to obtain the desired properties in the finished coils.

  卷线圈的寒冷的核酸混合的加工被实行在完成的线圈中获得被需要的性质。

• It points out that the rolling process can be controlled by the parameters affecting the equilibrium, in this way the quality of cold rolled strip can be improved.

  生产中可通过控制这些影响平衡的参数来调整轧制过程，从而提高冷轧带钢的质量。

• A surface inspection system for cold rolled strips is introduced, which is used in on-line detection and recognition of surface defects on cold rolled strips.

  介绍一套目前正在开发的冷轧带钢表面质量在线监测系统，该系统用于在线检测和识别冷轧带钢的表面缺陷。

• Effects of relevant manufacture techniques on cold rolled steel sheet performances are analyzed and the performance parameters which should be adopted for different automobile parts are advanced.

  分析了相关制造工艺对冷轧薄钢板性能的影响，指出不同的汽车部件应采取的性能参数。

• The effect of batch annealing process on the microstructure and mechanical properties of SPCCSD cold rolled steel sheet was studied under laboratory conditions.

  在实验室条件下，研究了罩式退火工艺对SPCC- SD冷轧板组织和性能的影响。