片语

Combustion-gas dynamics发射燃气动力学

combustion in gas phase汽化燃烧

combustion flue gas apparatus燃烧烟道气测定器

combustion fule gas apparatus燃烧排气测定仪英语

combustion fuel gas apparatus燃烧燃料排气测定器

combustion for gas气体燃烧

combustion product gas燃烧废气

combustion-gas flow燃气流

英汉例句

• in one work period, in addition that the combustion gas pushes the pistons to work, the jetted hi-pressure water, after evaporating, will also push the pistons to work.

  在一个工作周期内，除了燃烧气体推动活塞 作功外，喷射的高压水被汽化后也推动活塞作功。

• then, the normal working parameters of this engine can be simulated, such as the compression pressure, maximum combustion gas pressure, and effective pressure and so on.

  由此得到柴油机稳态工作过程的工作特性参数，如压缩压力、最高爆发压力和平均有效压力等参数。

• aim a new scheme of vertical launching system was presented to solve the problems of combustion gas exhaust and protection, guarding against unexpected firing and so on.

  目的为解决战术导弹自力垂直发射中的燃气排导、防护及防意外点火等问题，提出了一种自力垂直发射系统的新方案；

• by using physicochemical phase analysis, the phase in a new directionally solidified superalloy resisting combustion gas corrosion with long life had been determined qualitatively and quantitatively.

  采用物理化学相分析方法，对一种新研制的抗燃气腐蚀长寿定向凝固合金的相作了定性和定量分析。

• the method can be used to calculate the thermodynamic properties of the moist combustion gas for any kind of hydrocarbon fuel, any steam injection ratio and any fuel coefficient.

  该算法可以计算湿燃气在任意烃类燃料、任意注蒸汽比以及任意燃料系数条件下的热力性质。

• in addition, there are limits of the high combustion gas mixture is suitable for lean burn performance.

  另外，还有混合气发火界限高，适于稀燃的性能。

• detailed measuring point layout schemes and test methods for the different parts directly contacting with combustion gas are introduced and tests on diesel engine ca6df1-27are done.

  针对不同的与燃气直接接触的发动机零件，介绍了具体的测点布置方案及测试方法，并对ca6df1-27型柴油机进行了实机试验。

• valve bodies are engines of ventilators, ventilation process: on time and turn off the control valve to ensure full combustion gas mixed with gas and emissions.

  配气机构是发动机的换气机构，换气过程：控制气门按时关了，保证气配时充分燃烧混合气和排撂废气。

• fuel-efficient: fuel system cleaner, oil products increased atomization, incomplete combustion gas mixture, to maximize power.

  省油：燃油系统清洁，油品的雾化程度提高，混合气完全燃烧，功率达到最大化。

• the state equation has been established for the moist combustion gas as a two terms virial equation.

  将湿燃气当做实际气体考虑，用两项维里方程的对比态形式建立了湿燃气的状态方程；

• an ash blowing technology of combustion gas and pulse is used to solve this problem, which ensures co boiler having a long term operation.

  采取燃气脉沖吹灰技术等有针对性的措施，较好地解决了这一难题，保证了co锅炉长周期生产。

• presents the baking of the combustion gas turbine flue and primary reformer air chute of the second stage ammonia plant in cnooc fudao chemical co. , ltd. , explains and summarizes the baking process.

  介绍中海石油化学有限公司富岛二期合成氨装置燃气轮机烟道以及一段炉风道的烘炉过程，对烘炉过程进行说明和总结。

• with the aid of the state equation and the deviation function, the thermodynamic properties of moist combustion gas can be calculated accurately.

  利用状态方程和余函数修正法，对湿燃气的热力性质在理想气体的基础上进行了修正，使其热力性质较按理想气体计算时更加精确。

• the so2 concentration in the combustion gas above the coal bed also firstly rises, thendeclines along the traveling grate and reaches maximum near the midpoint of the grate.

  煤层上部烟气中的so2浓度沿炉排移动方向亦先升高后降低，在炉排中部剧烈燃烧区达到最大。

• the combustion gas flow was analyzed, the velocity and temperature distributions were calculated according to this model, the results fitted well with the actual flame.

  在此基础上进行了喷枪内外燃气流场分析，结果表明，燃气温度分布、速度分布与实际焰流有较好的一致性。

• the method for setting up the radiant coefficient is put forward to solve the infrared radiation temperature measurement problem for motor combustion gas flow field.

  提出了解决发动机燃气流场红外辐射测温时辐射系数设置的方法。

• the application of remote sensing ftir spectrometry in determination of the absolute radiation energy, combustion gas concentration and propellant plume temperature was reviewed.

  介绍了遥感傅立叶变换红外光谱测试技术的优点，综述了遥感ftir光谱技术在固体推进剂羽焰红外绝对辐射能量、羽焰温度、燃气浓度测定中的应用。

• the effect of combustion gas bubble on underwater trajectory of vertical launching submarine-launched missile was studied by combined solution of gas bubble equation and missile motion equation.

  本文在对潜射导弹水下发射技术相关背景深入了解的基础上，主要研究了潜射导弹水下发射载荷和出水载荷问题。