片语

network compensation technique网络补偿技术

liquid measure compensation technique流体计量补偿技术

dynamic reactive compensation technique动态无功功率补偿技术

dynamic compensation technique动态补偿技术

color compensation technique色补偿技术

Chemistry compensation technique化学补强技术

parallel distributed compensation pdc technique并行分布补偿技术

英汉例句

• but when we use phase shift compensation technique and make the line shift rate of the camera match the rate of the image, we can get very distinct image.

  而当我们使用相移补偿技术，使两个速率相匹配后，得到了非常清晰的图像。

• aim the optimization and synthesis technique and mutual coupling compensation technique for ultralow sidelobe phased arrays were discussed.

  目的研究超低副瓣相控阵天线的优化综合技术和互耦补偿技术。

• the principle of the analog-digital composite compensation technique is described and the factors causing fitting errors arc analyzed. the formula for calculating the maximum error is derived.

  还叙述了模-数混合补偿技术的工作原理，分析了引起拟合误差的因素并推导出计算最大误差的公式。

• the flow chart of cad/cae/cam for springback control and the die compensation technique for the typical bending structures based on kmas software were presented.

  提出了基于kmas的回弹控制、模具补偿的cad／cae／cam实施流程，并针对典型弯曲结构给出了补偿措施。

• but its open loop compensation technique makes the dynamic and steady performances parameter sensitive.

  但由于该系统是磁通开环控制的，因此，系统动、静态性能对参数变化较敏感。

• with the success in linear dispersion compensation technique in optical fiber communication, a new limitation with nonlinearity will be accumulated when the length of fiber link increases.

  随着线性色散补偿技术的成熟，光纤通信的另一个限制因素——非线性，将随着光纤链路的加长而积累起来。

• the results show that the presence of pdl in the system can significantly reduce the efficiency of the pmd compensation technique and outage probability increase with distorted eye diagram.

  结果表明，由于pdl的存在，导致补偿系统的补偿性能恶化严重，使得损耗概率增加，眼图张开度减小；

• since filter banks with non-lp property produces artifacts in image processing, we propose a phase compensation technique for the non-lp system, aiming at solving this problem.

  该方法对每一个非lp滤波器传递函数乘以一个相位因子，用以抵消原滤波器相位的非线性特性，这样可以消除子带图像的失真。

• a linear-feedback fuzzy controller is designed using parallel dispersal compensation technique for a large class of chaotic control systems.

  对一大类时滞混沌系统的受控系统，采用并行分散补偿技术，设计了线性反馈模糊控制器。

• it combines the motion compensation technique with a directional based spatiotemporal filter, and the interpolation result is the weighted sum of the two methods.

  将运动补偿技术与基于方向的时空滤波方法相结合，去隔行插值结果是运动补偿时间插值和基于方向的时空中值滤波方法的加权和。

• an error compensation technique is developed to solve the error magnification effect of twlpsi, which guarantees the same precision of single-wavelength psi.

  针对其误差放大效应，采用误差补偿技术，使得双波长达到了与单波长同样的测试精度。

• in view of the phenomena that uniform spray cooling brings about uneven deformation when quenching medium steel plates, the non uniform jet compensation technique was presented.

  针对中厚板淬火过程中均匀喷水时造成钢板变形的现象，提出了非均匀喷水的补偿方法。

• with the unique sharing structure and compensation technique of injected charge, this circuit shows many advantages, including simple structure and small area.

  采用独特的数字电路列共享结构，电荷注入补偿等技术，具有结构简单、面积小等特点。

• you「ll choose the compensation technique that best suits your design.

  你将会选择酬劳技术最好的适合你的设计。

• a novel optic bridge compensation technique using a polarization splitting prism is introduced, and the errors caused by the changes of prism」s extinction ratio are studied.

  介绍了一种使用偏振分光棱镜的新型光桥式补偿技术，并对因棱镜消光比变化导致的误差进行了研究。

• the precision of the thermometer is very high because of applying sensor nonlinear compensation technique through software.

  由于采用了传感器非线性补偿技术，提高了系统的测温精度。

• in this thesis, a novel baseband i/q estimation and compensation technique is proposed to overcome the frequency dependent i/q imbalance in mimo-ofdm systems.

  此论文提出一个新颖的基频处理方法来估计和补偿在mimo-ofdm系统下，频率相依的i /q不平衡效应。

• a novel optic bridge compensation technique using polarization splitting prism is presented in paper.

  介绍了一种使用偏振分光棱镜的新型光桥式补偿技术。

• this paper dealt with ultra-precision parallel grinding technique of micro glass lens mould and investigated form error compensation technique in grinding process.

  对小口径玻璃透镜热压成形模具的超精密平行磨削进行了试验研究，并对加工过程中的形状误差补偿技术进行了探讨。

• moreover, a variance compensation technique is presented to improve calculation accuracy of wind-induced responses.

  另外，提出以方差补偿技术改善风致响应计算精度。

• results the result of experiments shows that: although the negative capacitance compensation technique can′t let the output impedance approach to infinite, it can improve it obviously.

  结果：由实验结果发现，负电容补偿技术虽然无法使恒流源输出阻抗值趋于无穷，但是可使其阻抗值明显增大。