片语

composite stainless steel plate复合不锈钢板

composite channel steel beam组合槽钢梁

composite plastic steel grating塑钢格栅

composite damping steel plates复合阻尼钢板

composite stainless steel strip复合不锈钢带

composite of steel-concrete钢箱梁与混凝土组合梁

composite stainless steel band不锈钢复合带

ply steel复合钢；多层钢

composite e steel复合钢

compound steel复合钢；三层钢

Composite and Steel Cable-stayed Bridges合梁和钢斜拉桥

英汉例句

• Self propagating high temperature synthesis SHS ceramic lined composite steel pipes have many characteristics, such as simple technology, saving energy, low cost and good service effects.

  自蔓延高温合成陶瓷内衬钢管具有制造工艺简单、节能、成本低和使用效果好等特点。

• In this paper, a nonlinear finite element analysis of plate - truss composite steel girder is studied.

  对板桁组合钢梁进行非线性有限元分析。

• Adverse condition of concrete in tension and steel joist in compression occurs at inner support regions of continuous composite steel concrete beams.

  连续组合梁在内支座处的负弯矩区段会出现混凝土板受拉、钢梁受压的不利局面。

• This article mainly deals with the welding technology of stainless composite steel plate.

  主要阐述不锈复合钢板的焊接技术。

• The application of composite steel tunnel support technique to tunnel collapse handle at the Zhenlong Hydropower Station, Shimian and its applicable conditions as well as perspective are set forth.

  介绍了组合钢支撑技术在石棉镇龙电站隧洞塌方中的应用情况 ，同时探索出了该项技术的适用条件和推广前景。

• The composite steel plate production quality in line with national standards.

  生产的彩钢复合板质量符合国家标準。

• The slabs and walls which enclose thelower floor are concrete, while the uppermost levels are a composite steel andheavy timber structure with wood-frame infill.

  那些围合形成首层空间的楼板和墻是水泥制成的，而上面几层则是带有木窗框的复合钢筋和重型木结构。

• The composite steel pipe made by the technology of SHS thermit centrifugal casting has excellent wear resistance and can be widely used in mines, electric power and building materials industry.

  利用SHS铝热离心铸造技术制备的陶瓷内衬复合钢管具有优异的耐磨损性能，可广泛地应用于矿山、电力、建材等工业部门。

• The market of our country composite steel formwork is atrophying, and this article analyzes that.

  对目前市场大幅萎缩的组合钢模板从另一角度分析了其具有的优势。

• A composite steel frame-reinforced concrete infill wall (SRCW), in which the steel and concrete components work integrally through mechanical connectors.

  钢框架-内填钢筋混凝土剪力墻(SRCW)结构的组合作用主要是由抗剪连接件来实现。

• The microstructure and composition distribution of the iron-nickel alloy lined layer in a composite steel pipe produced by centrifugal-SHS process were investigated.

  研究了铝热 -离心法制备的铁镍基合金内衬复合钢管的组织结构 ，分析了内衬层沿径向的成分分布。

• The stainless composite steel plate is used in the metallic structure in Three Gorges Project, which is initial in hydraulic power station.

  三峡工程的金属结构中使用了大量的不锈复合钢板，这在国内水电建设中尚属首次。

• The thermal stress distribution of the stainless steel lined composite steel pipe prepared by centrifugal-SHS process was calculated by the finite element method under thermoelastic assumption.

  用有限元方法计算了铝热离心法制备不锈钢内衬复合钢管过程中的残余热应力分布。

• To investigate the hysteresis behavior of composite steel frame with PR connection-reinforced concrete infill wall structural systems, a nonlinear finite element program SRCWNP was developed.

  为了系统研究半刚接钢框架-RC剪力墻结构的滞回性能，编制了非线性有限元程序SRCWNP。

• This method changes load system, and the composite steel beam set on column top bears loads transferred by monorail hanging beam. This method meet technology and safety requirement.

  该措施改变传力受力体系，由新设置柱顶的组合钢梁承担单轨吊梁传来的荷载，满足生产工艺和使用安全的要求。

• Based on the test results and analysis, restoring force model of composite steel concrete beam was established with consideration of the degree of shear connection.

  在试验研究的基础上，考虑了剪力连接程度的影响，建立了钢—混凝土组合梁的恢复力模型，并编制了相应的计算程序。

• This article makes a rational assessment on composite steel formwork, and presents a new method for getting rid of the difficulty and exploitation and development.

  文章对组合钢模板作了比较理性的评估，并提出摆脱困境和开拓发展的新思路。

• Experiments have been conducted on the ultimate flexural capacity in composite steel - concrete beams with external post - tensioning tendons.

  本文对体外预应力钢-混凝土简支组合梁的抗弯承载能力进行了静载全过程试验研究。