片语

compound triming die复合式切边模

compound female die组合凹模

compound d die合模

Compound Stamping Die复合模

compound shearing die切断复合模

compound concave die复合凹模

compound extrusion die[机]

compound piercing die复合沖孔模

英汉例句

• improved properly such mechanisms as the location, stripping and scraps treatment, the common compound die was satisfied the need of the automatic stamping.

  对普通复合模的定位、卸料以及废料处理等装置加以适当改进，满足了自动沖压的需要。

• the belling-cold extrusion compound die was designed and the mechanism of the process was analyzed.

  设计了压凸—冷挤复合模，分析了压凸—冷挤复合工艺的成形机理。

• the structure and machining process of plane diffluent compound die are introduced.

  介绍了平面分流组合模的结构和加工工艺。

• the forming die is designed. the structure and working process of compound die is also introduced. the forming properties are analyzed and the force is calculated.

  介绍了波形套复合模的结构和工作过程，分析了波形套成形特点，计算了工艺力。

• the design describes the structure of compound die stamping flip-chip design and working process.

  本次设计阐述了沖压倒装复合模的结构设计以及工作过程。

• both the machine-heart spring of precise instruments and its forming technology are analyzed, whilst, the structural design characters of punching and pressing compound die are introduced separately.

  分析了精密仪表机芯用弹簧、成形工艺，并介绍了沖裁及压弯复合模结构设计特点。

• according to parts character, a pair of assembled punching, blanking compound die punching is designed, die structure is introduced, and assembled carling compound die structure is stated as well.

  根据零件特点设计了一副组合式的沖孔、落料复合模沖压两种产品，介绍了模具结构，论述了组合式纵梁复合模的结构特点。

• a curling compound die for the hinge used for the plate-bending machine was introduced. the structure characteristics of the die and the attention problems in the design of the die were discussed.

  介绍了一种适用于折板机的铰链卷圆成形复合模，讨论了该模具的结构特点和设计中应注意的问题。

• the structure, main design parameters and work process of the compound die installed on single action press and working for blanking and drawing with constant blank holder pressure were presented.

  介绍了用于单动压力机的新型恒压边力落料拉伸复合模的结构及主要设计参数和模具工作过程。

• through the analysis of forming technology of regulator of left chair, the method of using two sets of compound die is put forward. the specific die structure and its work pro- cess are introduced.

  通过对左座椅调整器的成形性工艺分析，提出了采用两套复合模结构的方法，并介绍了模具的具体结构及模具工作过程。

• mainly introduced the detailed structure and working process and the technology analysis of the blanking-drawing-extruding compound die for the stainless steel whistle pot cover.

  主要介绍了不锈钢球形响壶盖的落料、拉伸、挤边复合模的详细结构、模具工作过程、工艺分析。

• to analyse the stamping processes of spring film used in pressure switch and introduce construction design and working principle of the flexible compound die for stamping and forming.

  文章分析了压力开关膜片这类沖压件的沖压成形工艺，对柔性沖压成形复合模的结构设计和工作原理进行了介绍。

• the main points for the design of the compound die were introduced. the compound die has prominent advantages on the production of series products and on speeding up the production cycles.

  通过介绍复合模的设计及要点，阐明了复合模对于系列化产品的生产，加快产品的投产周期，具有显着的效果。

• the bending and pressing convex forming compound die for locking spring is designed, the die structure and pressing process are introduced, the product quality and production efficiency are improved.

  针对锁紧片零件，设计了折弯压凸复合模，并介绍了模具结构和工作过程。提高了产品质量以及生产效率。

• the structural design of compound die of punching localized separation blades is stated. the punched product quality is good by applying compound die slide structure.

  叙述了沖定位挡片复合模结构设计，采用复合模滑块结构，沖制的产品质量良好。

• introduced design method of compound die for the thin-long teeth fan-shaped slice of a large motor stator, pointed out processing difficulties, and proposed solution.

  介绍了某大型电机细长齿定子扇形片复合模结构的设计及零部件设计加工难点和解决办法。

• through analyzing the technologies of back simple bowl, a set of compound die was designed. it could satisfy accuracy requirement and make productivity improved greatly.

  通过对后朴碗工艺的综合分析，设计出一副复合模，能满足其精度要求，同时极大地提高了生产力。

• the bending and pressing convex forming compound die for locking spring is designed, the die structure and pressing process are introduced, the product quality and production efficiency are improved.

  针对锁紧片零件，设计了折弯压凸复合模，并介绍了模具结构和工作过程。

• the structural design, design parameters, material chosen and manufacture process of multi-pinhole compound die of main printed circuit board for large screen color tv are introduced.

  介绍大屏幕彩色电视机主印制板多小孔复合模的模具结构、设计参数、材料的选用和制造工艺等。

• by analyzing on the structure of cable clamp and pressing process, the solution is proposed, the bending-reshaping-trimming compound die is designed, the die structure and work process is stated.

  通过对电缆夹结构和沖压工艺进行分析，提出解决方案，设计了弯曲、整形、切边复合模，并阐述了模具结构及工作过程。

• in addition, both the working process of compound die and questions required attention are stated.

  同时也阐述了复合模工作过程及注意事项。

• the application of the shared plate technology effectively lowered the cost of the compound die and shortened the manufacturing cycle.

  共用模板技术的应用 ，有效地降低了复合模成本并缩短了制造周期。

• through the analysis of forming technology of regulator of left chair, the method of using two sets of compound die is put forward.

  通过对左座椅调整器的成形性工艺分析，提出了采用两套复合模结构的方法，并介绍了模具的具体结构及模具工作过程。