片语

Compression Set Test压缩变形测试

compression resistance test耐压试验

compression traction test拉压实验

compression strength test抗压强度试验

compression molding test specimen压塑试样

Cylinder Compression Pressure Test汽缸压缩压力测试

Compression deflection test压缩变形测试

confined compression strength test侧限抗压强度试验

compression loading test压缩载荷试验

英汉例句

• the hot compression test was performed, and the effects of the deformation rate, the deformation temperature, and the preparation process on mechanical property of the as–sintered alloys were studied.

  对放电等离子烧结合金进行高温压缩试验，研究了变形速率、变形温度和试样制备工艺对合金力学性能的影响。

• furthermore, key measurement instruments haven been brought in to enhance measurement strength, which includes pull and compression test machine, cmm, spectromaxx and projection machine, etc.

  同时还引进了关键检测仪器：申克万能拉伸测试机、德国三坐标测量仪、德国光谱检测仪、投影仪等。

• the results of triaxial compression test indicated that the duncan-chang model which is widely applied to sand and clay delete also could be applied to reinforced soil.

  三轴试验结果表明普遍应用于土体应力-应变关系的邓肯-张模型同样能够作为加筋土的本构模型。

• axial compression test can use double knife-edge bearing to instead spherical hinge bearing;

  轴心受压构件试验可采用双刀口支座代替球铰支座；

• in this paper, a directly contacting heater is introduced and the compression test technique of metallic sheets at temperature of 800℃ are presented.

  本文介绍了直接接触式加热器及金属板材800℃压缩试验技术。

• the single pass compression test showed that in the condition of the experiment, the mode of the stress-strain curve is dynamic recovery, which doesn「t change with temperature.

  实验结果表明，在实验条件下，应力-应变曲线仅为动态回复型，不随温度的变化而改变类型；

• there ′re many factors that influence the result of compression test for cast iron, among which the internal friction of material and the drum deformation of sample are most important.

  影响铸铁压缩试验结果的因素很多 ，其中最主要的是材料内摩擦力及试件的鼓胀变形。

• analyses were carried out of the undrained triaxial compression test results of several normally consolidated saturated clays.

  对正常固结饱和粘土的三轴不排水压缩试验结果进行了分析。

• the deforming process in metal forging is simulated through the compression test in which several workblanks of different size are tested on the tools with different surface roughness.

  文章通过几个不同尺寸坯料在不同表面粗糙度的工具上进行的压缩试验，模拟金属锻造的变形过程；

• the maxsp is compared with the result of the rock true triaxial compression test and that of the concrete twin-shaft, and is compared with mohr-coulomb」s yield criter…

  并与巖石真三轴压缩试验和混凝土双轴试验结果，以及莫尔-库侖等屈服準则进行了比较，证实了其合理性和适用性。

• when impact compression test is exerted, the pulse shaper has been used to regulate the incidence wave, so that the stress gradient will not be significantly high and the results is acceptable.

  在进行沖击压缩实验时采用波形整形器调整入射脉沖，从而使得试件内的应力梯度不致过大，取得了较好的效果。

• in compression test of rock loading in a constant rate of deformation way will undoubtedly lead to non synchronism between deformation and load response.

  在巖石压缩试验中，按等变形速率加值，势必造成变形和荷载响应的不同步，即一个匀速而另一个则出现加速或减速现象；

• because of the much lower density and wave velocity for some porous materials, there exist difficulties in the dynamic compression test of these materials.

  低阻抗多孔介质材料具有较低的密度和弹性波速，对其实施动态压缩实验具有一定的难度。

• after testing the different structures of corrugated board pallet, the obtained compression test factor can be used as a basis for pallet design and choice of this new material.

  通过大量实验对不同结构的瓦楞纸板托盘进行测试，得出了其相应的压力试验参数，为瓦楞纸板托盘结构设计和应用选择提供了依据。

• parameters of shear strength from triaxial compression test are widely used in project construction.

  在工程建设中三轴压缩试验提供的土体抗剪强度参数得到越来越广泛的应用。