片语

convection condensation heat exchange对流冷凝换热

releasing condensation latent heat凝结潜热释放

vapour condensation heat transfer蒸汽凝结换热

condensation heat recovery冷凝热回收

convective condensation heat transfer对流凝结换热

condensation heat exchangers consisting凝结换热器

dropwise condensation heat transfer[热]

condensation latent heat凝结潜热

condensation heat transfer coefficient凝结传热系数

英汉例句

• Considering gravity, interfacial shear stress, surface tension and interfacial thermal resistance, the analysis model for annular flow condensation heat transfer in microtube was presented.

  本文提出了微圆管内环状流凝结换热的分析模型，考虑了重力、汽液界面剪切力、表面张力以及界面凝结热阻的作用。

• The heat recovery system is mainly used to recycle condensation heat which is generated by the refrigerating systems of natatoriums, hotels and cabarets.

  本实用新型主要应用于回收游泳馆、宾馆、酒店制冷系统产生的冷凝热。

• The design scheme for preparing domestic hot water by using condensation heat from centralized air-conditioning system is analyzed with engineering example.

  结合工程实例，分析了利用集中式空调系统冷凝热制备生活热水的设计方案。

• This paper presents a theoretical analysis and experimental results of condensation heat transfer in the vertical two-phase closed thermosyphon.

  本文对竖直两相闭式热虹吸管内的凝结换热进行了理论分析和实验研究。

• Using condensation heat from centralized air-conditioning system for preparing domestic hot water has a remarkable economy, and can save energy and reduce thermal pollution to environment.

  利用集中式空调系统冷凝热制备生活热水不仅具有明显的经济性，而且在节能的同时降低了对环境的热污染。

• The theoretical analysis model predicts the mean condensation heat transfer coefficient and the predicted mean condensation heat transfer coefficient is compared with experimental data as wall.

  同时，由该模型对冷凝段的传热系数进行了预测，并将预测值与实验值进行了对比分析。

• In this article, the main influencing factors on condensation heat transfer include air flow rate, coolant flow rate, coolant inlet temperature and mixed gas velocity.

  在本课题中，影响传热过程的因素主要有空气含量、冷却水流量、冷却水温度及混合气气速。

• By using of the single tube laboratory for R22, tests and compares the evaporation and condensation heat transfer performance with different tooth profile parameters of inner-grooved tube.

  利用R 22单管传热试验台，对相同工况下不同结构参数的内螺纹强化管进行蒸发冷凝换热试验。

• Spirally corrugated and sawtooth-shaped fin tube is a high performance condensation heat transfer tube.

  螺旋槽锯齿翅片管是一种新型高效冷凝换热管。

• Using condensation heat from centralized air-conditioning system for preparing domestic hot water has a remarkable economy, and can save energy and reduce thermal pollution to envir…

  利用集中式空调系统冷凝热制备生活热水不仅具有明显的经济性，而且在节能的同时降低了对环境的热污染。

• A new physical model of condensation heat transfer on V type corrugated surfaces is presented.

  本文对V型波纹管的冷凝传热提供了一个新的物理模型和数学模型。

• Numerical simulation has been performed on the condensation heat transfer of the satured steam around high speed sub-cooled water jet.

  采用数值计算的方法，研究了高速过冷水射流外饱和蒸汽的凝结换热过程。

• The recovery condensation heat scheme, natural gas boiler scheme and electrical boiler scheme for preparing domestic hot water are compared economically.

  对制备生活热水的冷凝热回收方案、天然气锅炉方案、电锅炉方案的经济性进行了比较。

• Based on a lot of experimental data the empiric al correlations of single-phase heat transfer coefficient condensation heat transfer coefficient and pressure drop factors are given.

  根据大量实验资料，得到了计算对流换热系数、冷凝换热系数及阻力系数的经验关联式。

• The experimental results showed that the processing Conditions had a significant effect on the condensation heat transfer characteristics and the adhension of the polymer films to the substrates.

  实验发现，对于不同的基材，表面制备的工艺参数对冷凝传热性能及维持滴状冷凝的寿命具有显着的影响。

• For HCFC22, the enhancement of condensation heat transfer outside two kinds of enhanced tubes versus the plain tube is larger than that for R407C.

  对于所试验的两种强化管，HCFC22的管外冷凝换热系数的强化效果比R407C更明显。

• Discussed taking advance condensation heat of water in waste fume. at the same time, the water can absorbed several pollutants in waste fume.

  对比了不同空气系数下，不同排烟温度时的余热回收温度效率，探讨了利用燃烧过程中生成水的冷凝热及其对污染物的吸收作用。

• With actual projects, presents the design methods of condensation heat recovery.

  结合工程实例，介绍了冷凝热回收的设计方法。

• The condensation heat transfer in the inclined reflux condensers at various inclinations was investigated.

  研究在不同倾角下回流冷凝器中的传热，建立了冷凝传热模型。

• A new physical model of condensation heat transfer on cosine-type corrugated surfaces is presented.

  本文提出了在余弦型波纹表面上进行冷凝传热的一个新物理模型。

• It is indicated that the enhanced condensation heat transfer technology on vertical tubes, when applied to vertical utility heaters, can efficiently raise the feed water temperature and save energy.

  最后指出，立管冷凝强化传热技术在电站的立式加热器中应用，可以较大幅度地提高给水温度，实现节能增效。

• It is of considerable significance to get more insights into the mechanism of condensation heat transfer enhancement by means of surface coatings.

  这对深化表面涂层强化冷凝传热的机理以及选择传热表面涂层材料具有指导意义。

• Film condensation heat transfer characteristics are studied by numerical simulation for a single horizontal tube in the presence of a non condensable gas.

  为查明不凝气体对水平管外膜状凝结换热特性的影响规律，建立了水平单管的气、液双边界层模型。

• The fact that different substrate materials require different optimal processing conditions and demonstrate different condensation heat transfer coefficient, can be drawn from the present results.

  实验结果也表明冷凝表面基体材料对冷凝传热性能有一定的影响。

• New physical models of condensation heat transfer on semicircle type corrugated surfaces were presented.

  本文提出了一个半圆型垂直沟槽管冷凝传热的物理模型。

• The study on the characteristics of condensation heat transfer in B30 tube was performed experimentally.

  对B30换热管的管内冷凝传热特性进行了实验研究。

• There isn ta general accepted method to calculate the effect of air on the condensation heat transfer coefficient so far.

  空气量对蒸汽凝结放热系数影响的计算，目前还没有一个人们普遍公认的计算方法。