片语

taper angle[机] 锥角，锥度角；[数] 尖角

expansion cone half angle扩张半角

bottom cone inclination angle底锥溜角

cone vertex angle锥顶角

divergent cone half angle扩散段半锥角

cone semivertex angle锥体半顶角

spray cone-angle雾化锥角

cone apex angle control锥角调制

cone generating angle圆锥展成角

英汉例句

• a varying-temperature etching method for fiber tip preparing was proposed, with which fiber tips with cone angle as large as 35-52 degree could be routinely made.

  在光纤探针制作方面，本论文提出了一种变温腐蚀制备光纤探针的新方法，获得了35～52度的大锥角光纤探针；

• this paper emphatically introduced the reformation scheme of cone angle setting mechanism on warper.

  重点介绍了整经机上圆锥角调节机构的改进方案。

• the structural characteristics of the air core inside of the hydrocyclone under different cone angle and inlet flows are investigated by adopting the high-speed image technology.

  利用高速摄像技术研究了不同锥角和进口流量下旋流器内空气柱的结构特征。

• the forming process and shape of the air core were remarkably influenced by the feed flowrate and cone angle of hydrocyclones.

  旋流器的进口流量和锥角对空气核的形成过程及形状尺寸有着重要的影响。

• it is indicated that the split ratio has a relative small effect on the cutting size while the semi cone angle and sizes of overflow and underflow orifices have very large effects.

  根据计算结果，分流比对分割尺寸的影响比较小，半锥角、溢流口尺寸与底流口尺寸对分割尺寸的影响比较大。

• the use of the second collection optic 406 to reduce the cone angle of the light that passes through the wavelength converting element 110 improves the performance of the second dichroic filter 408.

  使用第二收集光学器件406来减小穿过波长转换元件110传递的光的锥角改进了第二二向色滤光片408的性能。

• you unhappy is the most unhappy, i could give up a lot of things can be the feel unimportant, but when i actually stood cone angle of life, i am sure, not so free and easy, really!

  你的不开心才是我的最大不开心，可能很多事情可以放弃，可以觉的不重要，但当我真的站在人生的锥角，我肯定没那么洒脱，真的！

• proper design of roller cone angle of smooth rolling is the key to obtaining a high accurate wall thickness.

  斜轧穿孔机轧辊形状设计十分重要，其中辗轧锥角的正确设计是获得高精度壁厚的关键。

• different forms of injection cone and different injection cone angle have little influence on current heaters.

  油嘴的喷油锥体形式及喷油锥角对现用加热器的性能影响不大。

• the stress and radial displacement will increase with the increment of half cone angle and lead.

  正常工况下，螺旋输送器的最大应力强度和最大径向位移都随着半锥角和导程的增加而增大。

• linear deformation zone of generating wall can be obtained by means of non-linear cone angle plug combined with the barrel-shaped rolls, so the wall accuracy can be increased greatly.

  采用带有非线性顶头锥角的顶头与桶形辊相配合可以获得线性的成壁变形区，从而大大提高壁厚精度。

• the morphology of spray, spray penetration, spray sauter mean diameter and spray cone angle is studied by numerical simulation through the experiment to verify.

  以及对喷雾形态、喷雾贯穿距、喷雾平均索特直径及喷雾锥角进行数值模拟研究，并通过试验来验证其喷雾特性。

• the influences of free flow, cone angle and bluntness are considered.

  该方法考虑了来流、锥角和钝度对底部热的影响。

• the spotlight and physical light shaders have a button to easily match the cone angle to the maya setting.

  聚光灯的灯光的锥形角度（照射范围角度）和物理灯光材质通过一个按钮可以轻易的匹配。

• results show that the stiffness factor and the friction-damping factor of the damper are related to the cone angle and the friction factor of the inner-ring when adopting a proper structure.

  结果表明，采用适当的机械结构，阻尼器的刚度因子和摩阻因子只与内环的锥角和接触面摩擦因数有关。

• for processing specificity of big cone angle with exceeding5 degrees, the tests were repeatedly conducted so as to explore feasible processing technology.

  针对大于5度的大锥角圆锥滚子加工工艺的特殊性，进行反复试验，摸索出可行的加工工艺。

• improvement program use of cone angle chokes; multi-nozzle chokes and multiple exchange design to extend manifold service life to ensure safety.

  采用锥角过度节流油嘴设计、多级节流油嘴降压设计和多路放喷管汇设计，达到延长管汇寿命保证安全生产之目的。

• by means of rounded testing of r0110 injector group, fuel-supplying performances, spray cone angle changing characters, droplet size and its distributions law have been obtained.

  通过对该喷嘴组的全面试验研究，得到了该喷嘴组的供油特性、喷雾锥角的变化特点和液滴尺寸及其分布规律。

• the results indicated that the shape of air core and its crackle varied with the cone angle and the inlet flows, which can not simply be described as column, twist or sinusoidal shape.

  结果表明，旋流器内空气柱的形状、弯扭程度因旋流器锥角和进口流量不同而不同，不能单纯用柱状、麻花状、正弦曲线状等来描述。

• in one embodiment, a third collection optic 414 may be included to reduce the cone angle of the light from the second wavelength converting element 412.

  在一个实施例中，可包括第三收集光学器件414来减小来自第二波长转换元件412的光的锥角。

• testing must not proceed beyond paragraph, 6.5 till the cone angle of spray is considered satisfactory.

  喷雾会焦若不及格，就不必继续进行第6.5级以后所说的试验项目。