片语

contact area接触面积，接触面

contact t surface接触面

electro-contact type surface roughne tester电接触式表面粗度试验仪

Non-Contact Optical Surface Profiling非触式光学微区形貌测试系统

contact tooth surface啮合曲面

contact discontinuity surface[流]

point-contact tooth surface点啮合齿面

electro-contact type surface roughness tester电接触式表面粗度试验仪

contact heating surface接触热面积

contact pornts surface触点表面

英汉例句

• a portion of the contact surface of the rolling component may be configured with a given surface roughness to provide sufficient traction.

  该滚动构件的接触表面的一部分可被构造成具有给定的表 面粗糙度以提供足够的牵引。

• there are two problems that affect simulation of seismic geophysical model for relief surface: one is size of contact surface of source and receiver with model;

  有两个问题影响起伏地表的地震物理模型模拟：一是震源和接收器与模型的接触面尺寸；

• this paper presents a new concept of 「sub-complete rock fundation」, which consider that the contact surface and internal bedrock formation all can ensure the transmission of dam-body tensile stresses.

  本文首先提出了「较完整基础」的概念，即认为接触面和基巖内部结构都能保证坝体拉应力的传递。

• the shrink-fit components usually suffer fretting damage in the contact surface under rotating bending load, which remarkably reduce the life of the components.

  过盈连接部件在旋转弯曲载荷下，易于在接触区域产生微动损伤，降低构件的使用寿命。

• provides tourist attraction which a fresh contact surface chooses itself for the tourist to yearn.

  提供给游客一个清新的界面选择自己向往的旅游胜地。

• it should pay attention to the pressure of the contact surface about the flexible material.

  伸缩性大的材料，注意接触面的压着力。

• a special optimess sensor is mounted on the rim inside the tire and measures the contact surface of the tire.

  特型optimess传感器被装于轮胎内侧轮沿上用于测量轮胎的接触面。

• the influence of the pile type and the friction angle of the contact surface on the limit bearing capacity of the piles and the composite foundation is discussed with an example.

  通过算例，讨论了桩型及桩土接触面上的摩擦角对散体材料桩及其复合地基极限承载力的影响。

• influence on clamping error of spares of contact surface quality;

  研究了不同切削厚度对竹材表面质量与屑片质量的影响。

• therefore, a connector and a contact surface between the connected guide wires are added through the inner connecting pipe and the outer connecting pipe to lower the resistance of the contact surface.

  因此，它可以通过内连接管和外连接管大大增加连接器与被连接导线间的接触面，降低接触面电阻。

• and the contact surface between a rotor and a stator should be vertical to the vibration locus of contact point to reduce the power loss.

  并且要使马达定转子之间的摩擦接触界面与接触点的振动轨迹相垂直。

• the heat transfer on the contact surface with frictional heating is very complex, and it is difficult to describe this phenomena exactly.

  摩擦接触界面的传热现象比较复杂，难以精确描述。

• under the effect of this kind of load, there are microscopic deformations and various disfigurements appear on the contact surface of the parts, and then lead to damage and failure.

  在多沖载荷作用下，零部件大都会在其接触表面出现宏观可见的变形，并引发各种缺陷，从而导致零件损伤失效。

• because they complete the function the emphasis point to be different, therefore has the certain difference in the contact surface arrangement.

  由于它们完成功能的侧重点不同，所以在界面布置上就有一定的差别。

• the harmonic variation of the normal contact pressure or the maximum hertzian pressure results in a wavy rolling contact surface profile.

  不同的最大赫兹接触压力对残余应力和残余应变影响较大。

• compared with the common nut, a contact surface between metals is added by adopting the protruded wing structure, plays a role of wedging and fastening and has more excellent theftproof performance.

  凸 出翼结构的采用比普通螺母增加了金属与金属间的接触面，起到楔入紧固的作 用，防盗性能更卓越。

• the client side procedure face the actual user, its necessary contact surface and the button, provides the network immediate communications system「s function to the user.

  客户端程序面向实际用户，它有必要的界面和按钮，向用户提供网络即时通信系统的功能。

• the energy input from arc to contact surface is a decisive factor on erosion of contact materials.

  电弧对触头表面的能量输入是影响触头侵蚀量的决定因素。

• a solution for contact problem based on contact surface geometry is presented.

  给出了一种基于接触面几何的接触问题解法。

• analysis of the physical characteristics of failure samples」 contact surface verify the failure mechanism and accelerated lifetime testing.

  对失效试品作表面物理分析以便分析其失效机理，验证寿命加速试验是否正常。

• taking box-shape parts as example, the influence of clamp apparatus, feature of work contact surface and distribution of clamp force on clamp error is analyzed.

  以箱体零件为例，用实验的方法分析了夹具与工件接触面形貌及夹紧力的分布对夹紧误差的影响。