片语

Copper aluminum tube铜铝管

copper nickle tube铜管

Brazed copper-tube钎焊

copper earth tube接地铜管

copper pipe铜管

copper-tube bus铜管母线

copper conductor tube空心铜线

copper fin tube铜翅片管

copper rifled tube内螺纹钢管

英汉例句

• a low viscosity oil designed for punching pre-coated aluminium sheet, copper tube expansion and bending.

  油 ，适合于空调行业中预涂铝鳍片的沖孔加工，也适合于铜管的弯管和胀管加工。

• the corrosion inhibitors should be selected and used correctly through testing based upon the water quality and copper tube conditions.

  应根据拟使用的水质和钢管条件，通过试验，正确选择缓蚀剂和缓蚀剂使用浓度。

• with the requirement increasing for copper tube , the traditional production technology of copper tube can not satisfy requirement .

  随着对铜管需求量的不断增加，传统的铜管生产工艺已经不能满足需要。

• the wall thickness of thick wall copper tube drawn without plug is calculated by using zhou-zhou formula.

  本文用双周数表计算了铜合金厚壁管空拔后的壁厚。

• for compression end connection, first slide compression nut onto copper tube , then slide on ferrule.

  对于压缩端口连接，首先将压缩螺母移动到铜管上，然后装上套圈。

• this paper put forward, a new production technology of copper tube with that is high efficiency and saving energy, that is, the continuous extrusion technology.

  提出了一种高效节能的铜管生产新技术连续挤压生产工艺。

• the inner spiral copper tube produced by extrusion-rolling process has a kind of special line defect, which influences the production yield remarkably.

  采用挤轧法生产内螺纹铜管时易出现一种特有的线形缺陷，显着影响内螺纹铜管的成材率。

• copper tube is the first choice for compensators , surface cooling equipments and other heat exchangers. here was one piece of copper tube that occurred leakage in short time after use.

  铜管是凝热器、表冷器等热交换器的首选管材，某表冷器铜管在投入使用后短时间内发生泄漏。

• introduces the effect factors of servicing mould copper tube from molten steel quality, caster equipment, processes operating, structure of copper tube, productive management and so on.

  从钢水质量、铸机设备、工艺操作、铜管结构及生产管理等方面分析了铜管使用寿命的影响因素。

• unusual cracks of seamless phosphorus-killed sucking copper tube used in refrigeration are analyzed by means of sem etc.

  用sem等方法对电冰箱压缩机用磷脱氧无缝铜吸气管异常断裂进行失效分析。

• the mechanical properties of tp2 copper tube are not only involved with internal factors, such as grain size and geometry, but also with environmental temperature.

  tp2铜管的力学性能不仅与晶粒度和几何因素等内因有关，还与环境温度等外因有关。

• there was no obvious oscillation mark on the billet surface. the average steel production of a copper tube was 3700 ton.

  铸坯表面质量良好，单根铜管的平均过钢量为3700吨。

• golden dragon group is the most advanced base for precise copper tube material research, development and technology innovation, as well as the largest precise copper tube producer.

  金龙集团是中国最具有实力的精密铜管材料科研开发与技术创新基地和世界最大的精密铜管生产企业。

• install the valve onto the copper tube and gently slide compression nut and ferrule up to the valve to engage.

  在铜管上安装阀门，然后轻轻地把压缩螺母和套圈移到阀门上并进行啮合。

• ceramic-lined compound copper tube is used in tube mould having excellent service effects and decreasing the production cost of tube blank.

  陶瓷内衬复合铜管应用于管式结晶器，可提高使用寿命，降低成本。

• people who want to family purification ros may become high cost due to high energy costs and water wasteful, and most families will need to use noncorrosive pipeline etc as pex copper tube replaced.

  人谁不想全家凈化，ros可能成为成本过高由于高能源成本和水的浪费，而且大多数家庭将需要使用非腐蚀性管道等作为pex的铜管更换。

• seamless copper tube material copper to experts can improve the strength and toughness , in particular, atmospheric corrosion.

  无缝管专家介绍铜管材质铜能提高强度和韧性，特别是大气腐蚀性能。

• we are the largest copper tube manufacturer in shandong province and the forth largest copper tube manufacturers in china.

  两公司紫铜管产销量在山东省同行业中位居第一，在全国同行业中排名第四。

• the paper introduces the principle of inner grooved copper tube and the structure features and performance of the forming.

  介绍了紫铜内螺纹管成型原理，成型装置的结构特点，设备性能。

• based on the single-tube experiment, the copper tube is made into high efficiency heat exchanger, so we can study on the air conditioner system of r410a.

  本文以单管试验为基础，将铜管制作成高效换热器，加以对r410a空调器系统进行研究。

• three-roll planetary rolling process of copper tube is simulated by large-deformation elastic-plastic finite element method.

  应用弹塑性大变形有限元法，对连铸铜管坯三辊行星轧制过程进行了三维有限元模拟研究。

• in this paper, the advantages of the manufacturing on the cutting copper tube joint with the cold extrusion heading technology are pointed out.

  文中指出了采用冷挤镦工艺代替切削加工生产铜管接头的优点。

• himod flagship series uses interactive 「type v」 coil, the internal thread copper tube and punched slotted fin, and heat transfer efficiency is higher than the traditional coil unit.

  himod系列旗舰型采用了交互「v型」盘管，采用了带内螺纹的铜管及沖缝型翅片，比采用传统式盘管的机组有更高的传热效率。