英语释义

• resembling a circle

片语

cycloidal gear[机] 摆线齿轮

cycloidal gearings摆线传动

cycloidal cyclinder摆彘筒柱

cycloidal cyclone摆线式旋流器

cycloidal-摆线的；圆形的

cycloidal path摆线轨迹

cycloidal profile摆线齿廓

the cycloidal摆线

cycloidal motion摆线运动规律

英汉例句

• by building the cycloidal polar parameter equation, the approximate error formula was derived.

  建立了摆线的极坐标参数方程，推导出逼近误差的计算公式。

• in this work, the rv type drive i. e. design and calculation of the closed type planetary gear with the cycloidal wheel are discussed.

  本文较详细地讨论了rv型传动，即具有摆线轮的封闭式行星传动的设计计算。

• gives the force analysis theory of mechanism w of cycloidal gear suitable for engineering practice and series complete formula.

  本文提出了一种适用于工程实际的摆线针轮行星传动的输出机构受力分析理论，并给出一套完整公式。

• based on the theory of forming cycloidal gear, this paper discusses the basic fundamentals and methods of machining cycloidal gear with cam mechanism.

  根据摆线齿轮齿廓的形成理论，探讨利用凸轮机构实现摆线齿轮加工的原理和方法。

• these are the mathematical models of drawing the pitch curve and the profile of the cycloidal wheel.

  分别建立数学模型，并通过计算机模拟各种摆线轮。

• for cycloidal pin wheel speed reducers which are mainly used to transfer motions, the return error will be one of the factors influencing their use performance.

  对于以传递运动为主的摆线针轮行星减速机，回程误差可能是影响其使用性能的因素之一。

• the conceptual design of the full complement cycloidal ball reducer is proposed and the actual prototype based on the digital prototype technique is realized.

  提出密珠摆线传动概念设计，采用数字样机技术完成数字样机的开发并制作了物理样机，大大加快了新产品的研发周期。

• experiments and analysis were carried out by the author to investigate the efficiency of cycloidal hydraulic motors.

  本文对如何提高摆线液压马达的效率进行了分析与试验。

• in this paper, the disc-type cutter manufacturing cycloidal type gears is designed by applying spacial meshing theory.

  本文利用空间啮合原理设计了加工摆线类转子的盘形刀具。

• acceptable metal shaving contact rollers of cycloidal gears and involute gears in shape grinding have been manufactured with t…

  用该法已加工出了满足生产要求的摆线齿轮、硬齿面渐开线齿轮成形磨削砂轮金属修整滚轮。

• the gear form of internal gearing cycloidal gear pump has important influence on machining and characteristics of pump, such as flow rate, fluctuation rate and noise etc.

  内啮合摆线转子齿轮油泵的齿形对泵的加工、性能（如：流量、脉动、噪声）等有很大的影响。

• the paper focuses on the manufacturing key technologies of new conic cycloidal gear planetary transmission's mesh parts.

  论文着重对新型锥形摆线行星传动啮合副的制造关键技术进行研究。

• cycloidal gear of four-rod mechanism is a species of novel combination mechanism.

  摆线齿轮四桿机构是一类新颖的组合机构。

• based on the equation of action line for cycloidal pump, a geometrical mathematical model is built to solve instantaneous flow, displacement, average flow and the pulsation of the pump.

  根据摆线泵的啮合线方程，建立了用几何法求解摆线泵的瞬时流量、排量、流量脉动率的数学模型。

• gives the force analysis theory of mechanism w of cycloidal gear suitable for engineering practice and series complete formula. the new theoretical results are very close to the practical observation.

  本文提出了一种适用于工程实际的摆线针轮行星传动的输出机构受力分析理论，并给出一套完整公式。其计算结果与测量结果吻合。

• cycloidal reducer is new kind of gearing machine which is based on the theory of planeary and cycloid pin geating.

  摆线针轮减速机是采用行星传动原理及摆线针轮齿合新颖传动机械。

• using this formula to estimate the performance of the cycloidal propeller and comparing the computational results with experimental results, it is shown that the agreement between them is quite good.

  本文还指出，该公式的形式也适用于其它的摆线推进器，但是公式中的各项系数应根据不同的推进器而取相应的值。

• on the basis of the functions of siemens cnc system, the sub-program for cycloidal cam machining has been developed.

  在siemens数控系统功能的基础上，开发出了摆线凸轮加工子程序，该子程序使用等误差直线逼近来保证凸轮的精度。

• our main products : reducer , gear motor , bevel gear , worm - gear motor , cycloidal reducer and variator.

  公司主要产品有：齿轮减速机；蜗轮蜗桿减速机；螺旋伞齿轮减速机；摆线针轮减速机及无级变速器。

• a practical and feasible route for planetary cycloidal gear hob and formation precise relieving cutter is opened too.

  为行星摆线齿轮滚刀及其成形精铲刀的简约化设计开辟了一条切实可行的途径。

• although the cycloidal gear has much merits the pure cycloidal gear is less used in practice and the modified one is widely employed.

  摆线齿轮具有许多优点，但是在实际应用中很少采用纯摆线齿轮，而大都采用修正摆线齿轮。

• based on the tooth profile curve equation of inner rotors in cycloidal pump, the formula for displacement calculation of the pump are derived.

  首次通过计算并控制摆线转子泵小转子廓线外凸部分最大曲率半径的方法来避免小转子廓线根切。

• and the time is the shortest for cycloidal path when the object moves along the different curve lines.

  且得出不同曲线路径下摆线路径的运行时间最短。

• in this paper, the effects of the spline clearance and the meshing pair of the cycloidal needle roller on motor efficiency are discussed emphatically, and the improving means are presented.

  重点讨论了花键间隙及摆线针轮啮合副对马达效率的影响，提出了改进措施。

• acceptable metal shaving contact rollers of cycloidal gears and involute gears in shape grinding have been manufactured with this method.

  用该法已加工出了满足生产要求的摆线齿轮、硬齿面渐开线齿轮成形磨削砂轮金属修整滚轮。

• in this paper a method is developed to calculate the hydrodynamic performance of cycloidal propeller at arbitrary direction angle.

  计算出摆线推进器在任意方向角状态下的水动力特性。

• the meshing characteristic of the cycloidal type gear pump is analyzed theoretically and calculated; furthermore, it is compared with that of the involute.

  对此摆线类齿轮泵转子的啮合特性进行了理论分析和计算，并与同尺寸的渐开线转子的啮合特性作了比较；