片语

piston ring cylinder wall活塞环

cylinder liner wall气缸缸套壁

Cylinder on wall上筒围

wheel cylinder wall车轮油缸壁

cylinder wall temperature缸壁温度

engine cylinder wall发动机气缸壁

cylinder-wall pressure筒壁压力

cylinder with thick wall厚壁圆筒件

英汉例句

• our model considers heat leak between cylinder wall and environment in combustion process, internal irreversibility of cyclic working fluid in adiabatic processes, and cycle time.

  模型考虑了燃烧过程气缸壁与环境间的热漏、循环工质在绝热过程中的内不可逆性以及循环时间的影响。

• and against the cylinder wall damping hole layout was designed with high usability.

  并针对缸壁阻尼孔的布置进行了设计，具有很高的实用性。

• the repeated measurement data to cylinder wall at the same location , basically described the same change of degree of uniformity.

  对圆筒内壁同一位置圆周的多次测量数据基本描述了该圆周的一致均匀度变化。

• high pressure vessel with hemispherical head thinner than cylinder wall is a new type of vessel which consists of sealing device, cylinder, hemispherical head and reinforcing ring.

  半球形封头壁厚与筒体壁厚不相等的高压容器是由端部密封装置、筒体、半球形封头和加强箍等组成的一种新结构容器。

• you have to mix oil into the gas in a two-stroke engine because the holes in the cylinder wall prevent the use of rings to seal the combustion chamber.

  在二沖程发动机中你必须混和燃料和气体，因为气缸壁上的孔阻止使用活塞环密封燃烧室。

• the preliminary tensioning of the horizontal restraints of dome and cylinder wall is made with equal stress while the principal tensioning is executed with c1500f jack.

  简体墻和穹顶水平钢束初步张拉采用等应力张拉，主张拉采用c1500f千斤顶。

• finally, using three-dimensional discrete element software pfc3d analog-pressure tests showed, in the course of cylinder wall is depressed, there is a clear soil arching phenomenon in soil.

  最后运用三维离散元软件pfc3d模拟压管试验表明，圆柱墻在下压的过程中，土体中出现了明显的土拱现象。

• this paper analyzes the main cylinder wall of siti-1703 type automatic hydraulic machine and puts forward several repair measures.

  对siti- 170 3全自动液压机主油缸壁刮伤的原因进行了分析，并提出了修复措施。

• it is equipped with piston rings to provide a good seal between the cylinder wall and piston .

  上面装有活塞环，从而使活塞和气缸壁之间具有良好的密封性。

• poor fuel quality. incomplete combustion and lack of sealing between piston and cylinder wall or badly losing valves. possibly incorrect engine timing / set up.

  燃油品质差，不完全燃烧和活塞与气缸壁之间的密封性差。 。

• in the two-cycle engine, the piston acts as a valve, clearing valve ports in the cylinder wall as it nears bdc .

  在二行程发动机中，活塞起到阀门的作用，当活塞接近下止点时，使气缸壁上的进排气口打开。

• some connecting rods have an oil spurt hole in the yoke or at the cap-mating surface to provide cylinder wall lubrication.

  一些连桿在大头轴头处或在连桿盖配合面上鉆有喷油孔润滑汽缸壁。

• poor fuel quality. incomplete combustion and lack of sealing between piston and cylinder wall or badly losing valves. possibly incorrect engine timing / set up.

  燃油品质差，不完全燃烧和活塞与气缸壁之间的密封性差。还有可能不正确的发动机正时/设置。

• the friction loss between vane tip and cylinder wall is the main factor affecting the friction power loss.

  滑片头部与气缸壁面的摩擦损失是影响摩擦功耗的主要因素。

• based on the calculation of cylinder wall thickness and the crack detection inspection, this paper analyzes the cause of crack, and introduces the crack processing craft and the processing effect.

  文章从核算缸壁厚度出发，结合探伤检查，分析了裂纹成因，介绍了裂纹处理工艺及处理效果。