片语

density defect密度缺点

Marco Defect Density孔洞密度

defect t density distribution缺陷密度分布

defect t density缺陷密度

low defect density低的缺陷密度

defect density distribution缺陷密度分布

high defect-density region高密度缺陷区

英汉例句

• From the results of different area structure testings, the theoretical relationship between the accumulative failure rate and the product of area and defect density (AD) was verified.

  从不同面积结构的测试结果验证了累积失效率f和面积A与缺陷密度d的乘积ad之间的关系。

• Some previous fracture probability and statistic equations are shown to be special cases of this equation and the defect density and the cumulative fracture probability play an important role.

  分析了缺陷数密度和缺陷累计失效概率对试件破坏的影响；

• The graph in Figure 1, which plots defect density against the number of lines of code under review, supports this rule.

  图1中的图，描述了缺陷密度与评审代码行数量之间的关系，支持该规则。

• The results show that the defect density is decreased great after treatment.

  结果表明：通过加温可以降低薄膜的表面粗糙度与缺陷密度大小。

• The more discerning QA can be in establishing the size of a release, the more useful that defect density becomes.

  更有见识的QA能够看出一个发布的规模，这将使缺陷密度变更更加有用。

• These holographic gratings are characterized by seamless patterns and a low defect density on a large area, due to a special fabrication technology.

  这些全息光栅的特点是无缝模式和大面积低缺陷密度，由于特殊的制造技术。

• The silicide may provide a template for crystallization, decreasing the defect density of the silicon and improving its conductivity.

  硅化物可以提供用于结晶化的模板，降低了硅的缺陷密度并且提高了其导电性。

• When the surface hole recombination velocity and defect density is bigger, the length of nanowire should not be too long.

  当表面复合速率和体缺陷密度较大时，纳米柱的长度不宜过大。

• It was shown that the film surface defect density could decreased by applying deposition temperature.

  结果表明：通过加温可以降低薄膜的表面粗糙度与缺陷密度大小。

• Silicon carbide crystals having regions of higher and lower defect density are also provided.

  碳化硅晶体较高和较低的缺陷密度地区也有提供。

• The industry has generally favored LOCs of one sort or another as an indication of size, as shown by defect density almost invariably calculated as defects per LOC.

  行业一般支持一种或另一种LOC作为大小的指示，如根据每L OC的缺陷计算的几乎不变的缺陷密度所示。

• As the number of lines of code under review grows beyond 200, defect density drops off considerably.

  评审代码行的数量超过200时，缺陷密度就会急剧地下降。

• In this case, defect density is a measure of 「review effectiveness.」

  在这种情况下，缺陷密度就是「评审有效性」的评价手段。