elongation percentage中文,elongation percentage的意思,elongation percentage翻译及用法

2025-10-31 11:33 浏览次数 11

elongation percentage

英[ɪˌlɔ:ŋˈgeɪʃən pəˈsentidʒ]美[ɪˌlɔŋˈɡeʃən pɚˈsɛntɪdʒ]

延伸率;伸长率

elongation percentage 片语

片语

specific elongation[力] 延伸率;[物] 伸长率;相对伸长

elongation percentage of roving粗纱伸长率

breaking elongation percentage断裂伸长率

fibers elongation percentage纤维伸长率

tensile stretch伸长率

elongation percentage of伸长百分比

approximate true elongation percentage翻译

roving elongation percentage粗纱伸长率

elongation percentage of calendering轧光伸长率

rove elongation percentage粗纱伸长率

elongation percentage 例句

英汉例句

  • the identification index then was uncoupled into the product of elongation percentage and length of tiny cells at the head.

    模型最终将舌形缺陷的标识量解耦为轧件的伸长率和头部微单元长度的乘积。

  • after detecting the properties, as the content of bi increased, the strength of alloy didn t change obviously, and the elongation percentage decreased and hardness promoted.

    通过力学性能的检测和切削性能的测定,表明随着铋含量的增加,合金的强度没有显着变化,延伸率降低,硬度增加,切削性能得到改善。

  • the test shows that the influence of roving elongation percentage on roving weight unevenness and evenness cv is evident, and the control of roving tension is very important.

    通过试验测试发现粗纱伸长率对粗纱重量不匀率和条干cv值影响显着,强调了控制粗纱张力的重要性。

  • the elongation percentage increases with the increase of the temperature and the decrease of strain rate.

    温拉伸试样的延伸率随变形温度的升高而升高,随应变速率的增大而减小。

  • elongation percentage and contraction of area increase as the temperature rise to the maximum of 36.6% and 55.7%, respectively.

    延伸率和断面收缩率随着温度的升高而增大,最大分别可达36.6%和55.7%;

  • its physical property is similar to that of spheroidal graphite iron tubes, but some aspects such as elongation percentage are inferior to the spheroidal graphite iron tubes.

    物理性质与球墨铸铁管类似,但在延伸率等较多方面均劣于球墨铸铁管,但灰口铸铁管价格适中。

  • the alkali treatment of jute yarn enhances yarn「s elongation percentage to 5 times and it」s elastic extension to 6.8times, decreaces it's strengtll a little.

    适当的堿变性处理工艺可使洋麻纱比普通洋麻纱全伸长弹性增加6.8倍;伸长率增加5倍;

  • the tensile strength and the elongation percentage of the parent metal and the weld zone increased slightly.

    沖击处理使焊缝区和母材区的强度和伸长率均有所增加。

相关热词