片语

epoxy resin adhesive detail环氧树脂胶粘剂

epoxy resi adhesive二合一黏合剂

epoxy structure adhesive环氧结构胶粘剂

epoxy polymer adhesive二合一黏合剂

Ceramic Epoxy Resin Adhesive陶制品接着胶

Epoxy acrylate adhesive环氧丙烯酸酯胶黏剂

epoxy polyamide adhesive聚酰胺黏结剂

epoxy structural adhesive环氧结构胶粘剂

英汉例句

• the water-absorbing material can play the role of improving the bonding strength of the epoxy adhesive in water.

  吸水性材料对水下环氧胶粘剂的粘接强度起增强的作用。

• a novel two-component epoxy adhesive with high adhesive strength was developed to meet the bonding requirement of mounting plate of crane rail and steel beam in the workshop.

  根据车间内钢梁上吊车轨道安装底板与钢梁粘接的具体要求，研制了一种中温固化双组分环氧胶粘剂。

• in this paper, a new reactive epoxidized polyurethane has been prepared, and a epoxy adhesive modified by the epoxidized polyurethane also has been studied systemically.

  本文研制了一种新型的具有反应活性的端环氧基聚氨酯，并对端环氧基聚氨酯改性环氧树脂胶粘剂进行了系统的研究。

• the compounding of the underwater epoxy adhesive cured with cyanamide is given in this paper.

  本文给出一种以氰基胺固化的水下环氧胶粘剂的配方。

• the compositions of high efficient epoxy adhesive and its application in repairing of gas piping were introduced in this article.

  介绍了高效环氧胶粘剂的配制及其在煤气管道修补中的应用效果。

• the results show that nanometer microwave-absorber can obviously decrease the microwave curing time of modified epoxy adhesive under the same curing condition.

  结果表明，在相同固化条件下，纳米微波吸收剂能明显降低改性环氧胶粘剂的微波固化时间。

• fatigue damage and destruction is the main two damage forms of epoxy adhesive layer of asphalt mixture of steel bridge deck.

  疲劳破坏和粘结层破坏是环氧沥青混合料钢桥面铺装最主要的两种破坏形式。

• petroleum-fermented nylon modified epoxy adhesive has high bonding strength and good shock resistance, moisture-proof and thermal stability.

  石油发酵尼龙改性环氧胶粘剂是一种胶接强度高和抗沖击性能、耐湿热性能好的胶粘剂。

• the content of ptfe powder filled in the epoxy adhesive can affect the impact strength, adhesive strength, hardness and dry-wear property of the adhesive.

  介绍用聚四氟乙烯粉填充于环氧胶中，研究了粉的含量对沖击强度、粘接强度、硬度、干磨性能的影响。

• according to the analysis of wearing curve by tests and wear topography by sem, slurry erosion wear mechanism of modified epoxy adhesive coating was discussed.

  浆体沖蚀磨损机制的分析讨论是结合磨损试验获得各种情况下的磨损曲线与扫描电镜观察到的磨损形貌进行分析的。

• the results show that:the effect of reinforced materials modified epoxy adhesive is remarkable.

  研究结果表明：增强材料对环氧胶粘剂的改性效果显着。

• room temperature curable epoxy adhesive for elevated temperature was introduced.

  研究了一种室温固化，可在120℃下使用的环氧树脂胶粘剂。

• the reason of the failure of epoxy bonded joint in water was that the epoxy adhesive on the metal surface was substituted for water.

  环氧胶接接头在水中破坏失效的原因主要是渗入到胶接层的水分子取代了胶粘剂分子在金属表面的粘附。

• in this paper, the modified epoxy adhesive applying in adhesion of stainless steel and casting polyurethane rubber is developed.

  研制出改性环氧胶粘剂作为底胶用于不锈钢与浇注型聚氨酯橡胶的粘接。

• study on preparation and properties of heat-resistant epoxy adhesive cured at room temperature;

  本文利用空间环境效应地面模拟设备对环氧结构胶粘剂进行了真空热循环试验。

• two siloxane epoxy curing agents were synthesized, and the effects of the products on the adhesive strength, refractive index and transparence of epoxy adhesive were studied.

  合成了两种硅氧烷环氧固化剂，并研究了它们对环氧树脂胶粘剂的粘接强度、折射率、透光性等方面的影响。

• j-164 room-temperature curing honeycomb core splice epoxy adhesive with low density was prepared.

  研制了j-164室温固化低密度蜂芯拼接用环氧树脂胶黏剂。

• the corrosion resistance of epoxy adhesive was assessed by its tensile shear strength.

  环氧胶粘剂的耐蚀性能是通过测定其拉伸剪切强度来评定的。

• a new epoxy adhesive which consists of epoxy and polyamide is introduced.

  介绍了一种新型以环氧树脂和聚酰胺为主体材料的环氧胶粘剂。

• moreover, the epoxy adhesive with high intensity, high toughness and high fill factor is made by molecule design and chemical production technology.

  同时，采用分子设计与化学制备技术制备环氧胶粘剂，具有高强高韧高填充比等特点；

• the experiment results shows that the new epoxy adhesive has low fluidity, and the adhesive strength and degradation resistance property can meet the demand of electrical porcelain products.

  结果表明：新配方解决了胶流挂问题，并在粘接强度、耐老化性等方面均满足产品要求。