片语

extrudate swelling挤出胀大

extrudate density制品密度

Extrudate distortion挤出畸变

blistered extrudate起泡挤出胶坯

extrudate output挤出物产量

extrudate expansion挤出物膨胀

extrudate coiling挤出物盘绕

extrudate temperaturev挤出物温度

extrudate temperature挤出料温度

英汉例句

• the extrudate swell behaviour of linear low density polyethylene and low density polyethylene blend (lldpe/ldpe) melt is studied by means of a capillary rheometer.

  应用毛细管流变仪，考察了实验条件下线性低密度聚乙烯与低密度聚乙烯共混物（lld-pe/ldpe）熔体挤出胀大行为及其影响因素。

• branched polymer is easily disturbed by the destabilization on die entrance, which will cause a irregular extrudate fracture;

  支化聚合物易受入口区的扰动干扰，造成挤出物无规破裂；

• the results show that oscillation in pressure drop at inlet of the capillary and the vibration and rupture of the whole extrudate co…

  整条毛细管上的挤出压力发生振蕩，挤出物外观发生光滑段和粗糙段交替出现的有规畸变。

• the effects of wall slip on co-extrusion flow field, interface shape and extrudate swell were discussed.

  主要介绍了黏弹流体挤出胀大的数值模拟研究进展。

• the effect of the technology and equipment, such as the structure and dimension of die plates, the extrusion conditions and so on, on the die swell and shrinkage of tread extrudate was described.

  阐明影响挤出胎面膨胀和收缩的主要工艺及设备因素是口型板的结构和尺寸、挤出条件以及设备。

• second, saccharification process was studied using extrudate of maize without germ at the levels of optimum extrusion parameters.

  其次，将脱胚玉米在上述挤压参数下进行挤压膨化，运用所得膨化物料进行糖化工艺的选择。

• influences of dynamic conditions on molecule chain relaxation during molecular orientation and extrudate swell and gas bubble nucleation were analyzed.

  分析动态条件对分子取向、出口膨胀中分子链松弛过程的影响，进而指出对泡沫塑料气泡成核行为的影响。

• in the thesis, the effect factors of the extrudate temperature have been researched during the processing of twin screw extruder.

  研究了在双螺桿挤出过程中，影响药料温度变化的有关因素，认为第一段机筒温度是影响药温的显着因子。

• the system parameters and rice extrudate properties index were affected significantly by moisture content and barrel temperature.

  加工温度、物料含水量对系统参数和大米膨化产品质量指标的影响极显着。

• changing the angle at which the extrudate is drawn away from the die can change the placement of buildup on the die and make it easier to clean.

  改变挤出物的牵引角度，就可以改变挤出物在口模上的堆积位置，这样就容易清除积料了。

• the extrudate diameters (radial expansion) were affected only by the sugar content, not by the salt content or screw speed.

  挤出物的直径（径向变量）只受到糖分的影响，而不受盐分或螺桿速度的影响。

• the extrudate shape, dimension and output can be effectively controlled on single roller extruder with its variable screw and roller speeds and the flexible combination of preform die and final die.

  单辊筒口型挤出机通过变更挤出机螺桿和辊筒转速及灵活的预成型口型和终端口型设计组合可以有效控制挤出物的形状、尺寸和生产率。

• the results showed that the extrudate with the most smooth surface was obtained when 5 phr of phenolic resin and 50/50 blending ratio of epdm/pp were used.

  结果表明，选择酚醛树脂硫化体系、控制酚醛树脂用量为5份以及epdm／pp共混比为50／50，可以得到挤出表面最为光滑的共混物。

• the developments of investigations on extrudate swell by using numerical simulation methods are reviewed in this paper.

  主要介绍了黏弹流体挤出胀大的数值模拟研究进展。

• the results indicate that the structure and quality of the extrudate are affected significantly by the material property.

  结果表明，原料特性对脱脂花生粉挤压组织化产品的质量和结构有明显影响。

• a model for predicting extrudate swell and average cell diameter of polypropylene foam is proposed based on the relationship between the extrudate swell and capillary number.

  综合胀大比与毛细管数的关系，提出了聚丙烯发泡体系挤出胀大和泡孔平均直径的预测模型。

• the effect of certain types or contents of stabilizers, modifies and blowing agents on extrudate quality density, surface, and cellular structure are described.

  讨论了稳定剂品种、改性剂品种和发泡剂用量对制品密度、泡孔结构以及外观表面的影响。

• influences of conveying phenomena, combination of screw elements, processing conditions and die on quality of the extrudate are analyzed.

  讨论了物料在螺桿中的输送特征、螺桿元件组合、生产工艺条件及模具结构等对产品质量的影响。

• the effect of the core pin on extrudate characteristic was little.

  机筒上的销钉对挤出特性影响力很小。

• the defect of extrudate in the extrusion process in the form of melt fracture could only be evidenced in the semisolid state of pp melt.

  在挤出过程中，以熔体破裂形式出现的挤出物的缺陷只有在pp熔体处于半固体状态时才能观察到。

• combined the extrudate rheology character, the function relationship among the screw extrusion pressure and the screw working parameter, and the screw geometry dimension were established.

  确定了物料实现顺利挤出通过挤压机的机头和机嘴部分所需的压力。

• the effect of blending was investigated by analyzing the viscoelasticity, pressure oscillation, flow curves and extrudate appearance.

  采用双毛细管流变仪详细研究了聚乙烯及其共聚物的挤出畸变、管壁滑移及挤出压力振蕩现象。

• the extrudate swell behaviour and the factors affecting it during short die extrusion of linear low density polyethylene (lldpe) melt have been investigated by using a rheometer.

  应用毛细管流变仪，考察了线性低密度聚乙烯（lldpe）熔体于短口型挤出中的胀大现象及其影响因素。

• the curve can be applied to controlling yield quantity of the alcohol fermentation process in the maize extrudate solution .

  该曲线对用膨化脱胚玉米生产酒精的工艺过程的控制有指导意义。