英语释义

1. to force, press, or push out

2. to shape (a substance, such as metal or plastic) by forcing through a die

3. to become extruded

4. to force, press, or push (something) out

5. to shape (something) by forcing it through a hole

6. to become extruded

片语

extruder screw挤出机螺桿；压出机螺桿

vertical extruder立式挤出机

Extruder unit挤出系统

rubber extruder橡胶挤押机

extruder die挤出机模

Feed extruder饲料膨化机

dump extruder挤压成形机

Extruder Model挤出机型号

mixer extruder挤出混料机

英汉例句

• the mechanism of conveying, melting and plasticating of uhmwpe in the extruder were investigated with screw extraction experiment.

  研究了uhmwpe在挤出过程中物料输送及熔融塑化机理。

• the flow of the pellets into the extruder is more consistent and the behavior during melting is also better.

  在挤压机中的球形颗粒流动更加一致，熔化过程中的表现也很出色。

• check the feed throat cooling and focus on extruder zone 1 for resolution.

  解决方法是检查喉咙冷却部分和重点检查挤出机器区域1。

• the key is how to heat up the cold feed extruder equably and improve extrusion efficiency.

  但关键问题是如何使冷喂料挤出均匀加热，如何保证挤出质量，提高挤出效率。

• single screwer extrusion theory is more and more consummate, and some developed countries began to utilize it to design single screw extruder design.

  单螺桿挤出理论经过几十年的发展日趋完善，一些发达国家已经利用单螺桿挤出理论指导单螺桿的设计。

• familiar with maintenance of compound extruder and autoclave equipment.

  熟悉橡胶挤出机，硫化设备维护。

• the way how to improve the design of screw extruder used for hot briquetting process is introduced.

  介绍了热压型焦工艺设备螺旋挤压机设计改进情况。

• the structural feature of the single and twin screw extruder are compared.

  分析比较了单螺桿和双螺桿挤压机的结构特点。

• in an earlier column i discussed feed throat design and how it can affect extruder performance.

  在早期的专栏里，我讨论过喂料口（管）设计，以及它是如何影响挤出机的性能的。

• use reducer special for plastic extruder with alloy hard - toothed surface.

  采用合金硬齿面塑料挤出机专用减速机。

• is a professional production of large pipe extruder and various plastics machinery as one of the manufacturers.

  是一家专业生产大型管材挤出机和各种塑料机械为一体的厂家。

• ppta (polyphenylene terephthalamide) pulp was prepared by semi-continuous direct polycondensation using a co-current rotating and meshing twin screw extruder as main reactor.

  以同向啮合旋转的双螺桿挤出机作为主反应器，采用半连续化直接缩聚法制备了ppta浆粕。

• as i said, everything that goes through the extruder goes through the feed throat first, so this can be a controlling aspect of the process.

  如我所说，任何通过挤出机的东西都要先通过喂料口（管），所以这是工艺控制的一个方面。

• it introduced axial pneumatic clutch structure, principle, function of de-airing extruder , and analysed its common fault in product.

  介绍了真空挤出机气动离合器的结构、原理、功用，分析了气动离合器常见的故障。

• molten powder coating formulation as it exits the extruder during the manufacture process.

  在生产过程中，粉末涂料在挤出机中的熔化过程。

• a method for accurately measuring the extruder output by means of weight-loss metering is presented.

  提出了一种用失重计量方式来实现挤出机生产率精确测量的方法。

• in this paper, on the basis of intermittent polymerization, twin screw extruder chosen as the reactor, the semi - continuous polymerization of polysulfonamide is investigated.

  在间歇式聚合的基础上，选用双螺桿挤出机作为反应器，对聚砜酰胺进行了半连续化聚合的研究。

• the set up and operation of the extruder should be followed carefully for safe production.

  装配和操作挤出机都必须严格遵守安全生产的原则。

• device used to melt & mix plastics and powder coatings. an extruder utilises heat and mixing to mechanically knead the formulation to achieve a homogeneous mixture.

  粉末涂料用于熔化和捏合的设备，挤出机利用热量和机械捏合可以达到高度混合的目的。

• the native starch was transformed to thermoplastic starch (tps) by the torque rheometer, single screw extruder and plasticizers.

  利用转矩流变仪、单螺桿挤出机和增塑剂将天然淀粉转变为热塑性淀粉（tps）。

相似词

banish(Banish)人名；(英)巴尼什

bounce弹跳；弹力；活力；（突然的）上升；十足的自信；（头发的）弹性；碰撞

cast out驱逐；逐出

chase追逐；追捕；试图赢得；雕镂

dismiss解散

eject喷射；驱逐，逐出

expel驱逐；开除

kick out解雇；开除；把球踢出界

oust驱逐；剥夺；取代

out熄灭的；盛开的；面市的；出局的；不能被接受的；过时的；不準确的；打算做……的；被公开的

rout(Rout) （美）劳特（人名）

run off逃跑；印出；流掉；进行决赛

throw out扔掉；伸出；说出；否决；突出

turn out（以某种方式）发生；最后是，结果是；出席，参加，前去观看；关掉，熄灭（电灯、煤气等）；生产，制造