英汉例句

• the method of laser beam welding micro-module with filler wire was discussed.

  并讨论了微型结构件的激光填丝焊接方法；

• in order to realize the high power co2 laser welding of 6061-t6 aluminum alloy sheet under high travel speed, filler wire er4043 and er5356 are selected for welding.

  为实现6061-t6铝合金薄板的高速高功率co2激光填丝焊接，选用了er4043，er5356两种焊丝进行了焊接性试验。

• the welding technology of lower power pulse yag laser beam welding micro-module with filler wire was given.

  给出了利用脉沖yag激光做微型结构件的激光填丝焊接的较佳焊接工艺。

• zl114a aluminum alloy sheet was tested by laser filler wire welding . through the three different alloy compositions of aluminum alloy welding wire, to add different alloy element to the weld.

  对zl114a铝合金薄板采用激光填丝焊接，通过三种不同成分的铝合金焊丝，向焊缝中添加合金元素。

• the results show that, the filler wire can eliminate the subside and undercut of butt joints which are inevitable in the laser welding aluminum alloy without filler wire.

  结果表明，填充焊丝可以消除铝合金激光自熔焊时的凹陷、咬边等宏观缺陷；

• in the mig with filler wire . with the increase of wire feed speed, transition coefficient of zn trend to decrease.

  mig填丝焊接过程中，随着填入锡黄铜焊丝速度的加快，锌元素的过渡系数有减小的趋势。

• as to welding method, well-formed welded joint has been obtained by determining proper tig with filler wire process parameters.

  在焊接方面，通过确定合理的填丝tig焊接工艺规范，获得了成型良好的焊接接头。

• the technology of lower power pulse yag laser beam welding with filler wire was introduced.

  介绍了利用较小功率脉沖yag激光做热导焊接的激光填丝焊接技术；

• because tig welded joints without filler wire always hold low strength and poor formation, tungsten inert gas welding process with filler wire is inevitable.

  由于镁合金不填丝的tig焊接接头强度低，焊缝表面成型不好，所以，镁合金的填丝tig焊接方法不可避免。