英汉例句

• for optimum corrosion resistance, surfaces must be free of scale and foreign particles and finished parts should be passivated.

  为了得到最好的抗腐蚀性能，表面应无划痕和其他物质，加工完的零件需做钝化处理。

• molded-in inserts in finished parts must meet the torque rating for the insert thread without breaking free from the part.

  成型件里的镶件必须满足用于镶件螺纹的扭矩等级，而不会从零件上松脱。

• finished parts must be clean and free of residue.

  完成的零件必须是清洁的并没有渣滓。

• we can cast various metal material parts and finished parts according to customers「 requirement with design throughput of 1000t annually.

  可按照用户要求铸造各种金属材质的毛坯件，加工各类成品部件。设计生产能力1000t/年。

• especial finished parts need precision and have size heat treat film available for film removal, debarring of casting parts.

  研磨工件需要有精确尺寸及热处理膜、去黑膜、去黑头、倒角、表面精铸造工件磨光之用。

• conductive thermoplastics compounds have a number of advantages over metals or surfactant coatings. finished parts are lighter in weight, easier to handle, and less costly to ship.

  导电热塑性共混物相对其它金属或者表明处理涂料具有以下优点：最终制品具有更轻、更容易把持、更少的运输费用。

• by the time finished parts reach inventory, the cartons often appear to be heavily worn.

  当最终零件到达库存时，箱子通常看上去磨损都很严重。

• gudel double column workpiece loading device, model lp 25/25, standing above the machine, with double gripper for finished parts and blank parts, and workpiece delivery belt.

  gudel双柱工件装载主轴，型号lp 25/25，位于机床上空，带用于精加工件和毛坯件的双卡爪及工件传输带。

• this paper presents a summary on studies of factors which influence the quality of finished parts based on permeability of fibrous preform, voids or dry spots and residual stress.

  纤维预制体的渗透性、孔穴或干斑的形成、残余应力的形成是影响成品质量的三个主要方面，本文对研究中存在的问题，进行了总结和评述。

• being an important category of metal machining, metal sheet punching has its finished parts widely applied in many industries.

  金属板材加工是金属加工的一个重要门类，其沖压件广泛应用于国民经济的各行各业。

• the finished parts should look as drawn below.

  完成的部分应视为制定如下。

• importantly, testing on finished parts must be performed to confirm that stiffness and strength are acceptable.

  重要 的是，必须对成品进行测试，以确定其坚固度和强度达到可接受程度。

• so to prevent overproduction, the upstream doesn」t 「push」 finished parts to the downstream, but instead it is the downstream that actively pulls (fetches) the parts from the upstream.

  为了避免生产过剩，上游工序不是将成品零部件「推」给下游工序，反而是下游工序主动地从上游工序中拉出（拿）零部件。