英语释义

1. administered or occurring between two laminae (as of the vertebra)
interlaminar epidural steroid injections involving two or more laminae
Test methods for measuring the interlaminar fracture toughness of composites made with polymer matrices …
— David R. Burwasser … was first developed by a Dr. Nakagawa in Japan as a friction material for high-performing automotive, motorsport clutches. They required a friction material that could be machined into complex shapes and would retain high interlaminar strength while at the same time offer a low wear rate.
— Gavin Dunphy and Yu Kin

2. administered or occurring between two laminae (as of the vertebra)
interlaminar epidural injection involving two or more laminae
interlaminar stress

片语

interlaminar liquid层间液体

interlaminar strength层间强度

interlaminar shear层间剪切

interlaminar properties层间性能

interlaminar spacing片层间距

interlaminar tension层间拉伸

interlaminar zone层间区域

interlaminar crack层间裂纹

interlaminar toughness层间断裂韧性

英汉例句

• The three loading type are studied and analyzed, and calculated with finite element method for compressive stresses and interlaminar shear stresses distribution on 1-3 face.

  本文对这三种加载形式进行了研究和分析，并用有限元素法计算了这三种加载形式在1—3面内的压应力和层剪应力的分布。

• In order for the solution of the laminated plates and shells to ensure interlaminar continuity of the physical variables, the transfer matrix technique was used.

  针对层合板壳问题，为了保证各层之间物理参量的连续性，进一步应用了状态转移矩阵技术。

• With the methods of the pre-heating before welding, controlling the interlaminar temperature and the heat treatment after welding, the welds that satisfy the quality specifications can be available.

  通过焊前预热、层间温度控制及焊后热处理等手段获得了满足质量要求的焊缝。

• In this paper, the interlaminar stress distributions of symmetric composite laminates with a hole are predicted by the three-dimensional elastoplastic finite element method.

  本文用三维弹塑性有限元法计算了含圆孔对称复合材料层板的层间应力分布。

• It was concluded that the interlaminar tensile strength of the composite is dominated by the bonding strength of the interface between fiber and matrix, not by lay-up orientation.

  结果表明：该复合材料层间拉伸强度较少受到铺层取向的影响，而由纤维与基体的界面结合强度所控制。

• The results show that the treatment makes the interlaminar shear strength of the composite increased 17.5% and the linear ablation rate decreased 58.6%.

  得出，该方法是提高复合材料层间剪切强度和抗烧蚀性能的有效方法，它可使层间剪切强度提高17．5 ％ ，线烧蚀率减小58．6 ％ 。