英语释义

• (of some shells) closely coiled so that the axis is obscured

• especially of petals or leaves in bud; having margins rolled inward

片语

involute serration渐开线花键；[机] 渐开线锯齿

involute spline[机] 渐开线花键

involute profile[机] 渐开线齿形；[机] 渐开线齿廓

involute equalizer螺旋式均压线

involute tooth渐开线齿

involute gear[机] 渐开线齿轮

involute artifact渐开线样板

involute coil渐开型线圈

metacentric involute稳心轨迹曲线

filar involute线渐伸线

prolate involute延伸渐开线

英汉例句

• up to now, it has universally been thought that provided the input torque of the driving gear of the involute gearing keeps constant, its supports do not vibrate.

  在齿轮传动领域内，至今依然普遍认为，只要主动齿轮的输入扭矩保持恒定，渐开线齿轮支座就不会产生振动。

• the standard involute cylinder gear is studied in this paper.

  本文以标準渐开线直齿圆柱齿轮作为研究对象。

• the paper introduces a way of measuring the deflection involute spline, and the calculation of diameter and distance of the measuring bar.

  介绍了用量棒检测变位渐开线花键的方法，以及量棒直径、跨棒距、棒间距的计算方法和公式。

• the result will offer reference data for design of involute gear and optimization of parameter choice, and offer new mathematical model for numerical analysis of root stress.

  其计算结果将为渐开线齿轮设计、参数优化选择等提供参考数据，同时为齿根应力数值分析提供了新的数学模型。

• in this paper we introduce to the meshed experiment step on involute gear tooth profile by caxa- 97 software and set up a method of gear cutting tool in the experiment of meshing and cutting gear.

  本文介绍了用微机和caxa-97软件进行渐开线齿轮范成实验的步骤和范成实验时齿轮插刀设置方法。

• the rolling technique for fine-module involute spline shaft possesses many advantages.

  小模数渐开线花键齿轴的滚压技术有很多优点。

• this paper describes the performance test, contact fatigue strength test and bending fatigue strength test on the gear reducer of involute point contact ferrographical analysis is made.

  本文对渐开线点啮合齿轮减速器进行了性能试验、接触疲劳强度和弯曲疲劳强度试验，同时还进行了铁谱分析。

• involute profile of internal gear, in the small gear and internal gear intermediate have a crescent shape of the diaphragm, the purpose is the oil absorption cavity and pressure oil cavity off.

  渐开线齿形的内啮合齿轮，在小齿轮和内齿轮中间有一块月牙形状的隔板，目的是把吸油腔和压油腔隔开。

• at last, the result of the involute gear driving design is described.

  最后给出了渐开线齿轮传动设计的计算结果实例。

• helical rotor is the most important part of rotor flow meter, and its section shape is normally formed by involute and cycloid.

  螺旋转子是转子流量仪表中的心脏零部件，其截面形状一般由渐开线和摆线组合而成。

• according to the principle of profiling machining of involute spherical gears, this paper designs the accurate involute profile curve of its finger milling-cutter.

  根据渐开线球齿轮的仿形加工原理，设计一种具有渐开线齿廓的指状铣刀。

• based on the current design method of involute cylindric gear transmission, this paper treats the strength, stress and relevant parameters of the gear as random variables.

  本文在现行渐开线圆柱齿轮传动设计方法的基础上，将齿轮的强度、应力及有关参数当随机变量处理。

• the results show that the involute finger shape-curve made from rotating the coordinate can be used as an initial type for further analysis and optimization of finger seal.

  研究结果表明用旋转变换坐标方式获得的渐开线指尖密封型线可作为下一步指尖密封性能分析及优化设计的初型。

• in comparison to traditional involute cylindrical worm and wheel drives, it has the following advantages: easy to manufacture, low cost, high tooth accuracy and a better lubrication condition.

  与传统的渐开线圆柱蜗桿蜗轮传动相比，渐开线圆柱蜗桿斜齿轮传动具有易于制造、成本低、齿面精度高、润滑条件较好等特点。

• d. gear box: 200 involute cylinder bevel wheel, cast alloy steel piston.

  齿轮箱：200渐开线圆柱斜齿轮，铸造合金钢活塞。

• a novel on-machine measurement method based on the forming theory of involute profile and movements of nc gear machine is presented, and the corresponding on-machine measuring system is implemented.

  基于齿轮渐开线轮廓面的构型机理和数控齿轮加工机床的运动功能，提出了一种齿轮在机测量方法，并开发了相应的在机测量系统。

• the method is adapt to the manufacture of involute and revacycle straight bevel gear.

  作者所提出的方法适于渐开线和圆拉直齿圆锥齿轮的加工。

• this paper introduced the calculation of the maximum undercut and the involute length of gear after cutting with gear cutter hob.

  介绍了磨前滚刀滚切齿轮的最大根切量和磨后的渐开线长度计算，并建立了数学模型。

• analysis the mass and linear wearing rules for the surface of involute gear tooth, with dry friction or lubrication shortage.

  分析了渐开线齿轮轮齿表面在干摩擦或润滑不良情况下的质量磨损及线磨损规律；

• this paper describes the calculation method in substituting of circular-arc for. involute with some examples applied in tool manufacturing.

  介绍了用圆弧代替渐开线时的计算方法及其在工具制造中的应用实例。

• if we unwind this paper, each point on the angular edge generates an involute curve .

  如果我们伸展这纸，每点在那之上有角的边缘产生一纷乱的曲线。

• the dynamic contact finite element models of standard involute gear and modification gear are established in the software of ansys.

  在ansys软件中建立了标準渐开线齿轮与修形齿轮的动力接触有限元模型。

相似词

baroque巴洛克风格；巴洛克艺术

byzantine拜占庭式的；东罗马帝国的；错综复杂的；暗中的

complex复合体；综合设施

complicate使复杂化；使恶化；使卷入

complicated难懂的，复杂的

convoluted盘绕；缠绕（convolute的过去分词）

daedal错综复杂的；千变万化的；巧妙的

elaborate精心制作；详细阐述；从简单成分合成（复杂有机物）

intricate复杂的；错综的，缠结的

involved涉及；使参与；包含（involve的过去式和过去分词）

knotty棘手的，难解决的；[木] 多节的；有结的

labyrinthian迷宫的；错综复杂的（等于labyrinthine）

labyrinthine迷宫的；复杂的

sophisticated使变得世故；使迷惑；篡改（sophisticate的过去分词形式）

tangled紊乱的；纠缠的；缠结的；复杂的

相反词

plain平原；无格式；朴实无华的东西

simple简单的；单纯的；天真的

uncomplicated简单的；不复杂的