片语

involute cylindrical gear spline渐开线齿轮花键

involute ur gear渐开线正齿轮

involute planetary gear渐开线行星齿轮

the involute of gear齿轮渐开线样板

Involute helical gear渐开线斜齿圆柱齿轮

involute cylindrical gear渐开线圆柱齿轮

involute spur gear渐开线正齿轮

involute helicoid gear渐开线齿轮

英汉例句

• the dynamic contact finite element models of standard involute gear and modification gear are established in the software of ansys.

  在ansys软件中建立了标準渐开线齿轮与修形齿轮的动力接触有限元模型。

• the result will offer reference data for design of involute gear and optimization of parameter choice, and offer new mathematical model for numerical analysis of root stress.

  其计算结果将为渐开线齿轮设计、参数优化选择等提供参考数据，同时为齿根应力数值分析提供了新的数学模型。

• the performance comparative tests are done within involute gear and gear with meshed medium belt.

  在试验台上进行了带式啮合介质齿轮与渐开线齿轮减速器整机啮合性能对比试验。

• the results are compared to those of the standard involute gear and proof that the bending strength of the composite profile tooth is higher than that of involute one.

  结果表明，复合齿形齿轮比渐开线齿形齿轮具有更高的弯曲强度。

• aimed at a kind of rotary cutting machine, the machining process of involute gear chamfering is kinematically analyzed, and the moving locus equations of cutting edge are deduced.

  针对一种目前国内研究较少的回转切削机床，分析了对渐开线齿轮进行倒角加工时的运动情况，得出了该机床在进行倒角加工时刀具切削刃的轨迹方程。

• in this paper, an approximate method of using three tangent arcs to substitute the involute gear profile curve is put forward.

  提出用圆弧来代替渐开线齿形的近似方法，实现了渐开线齿轮三维实体造型的直接编程生成技术。

• comparing with involute gear pump, the instant displacement is in direct proportion to the angular velocity of the gear and stable without pulsation.

  对比渐开线齿轮泵，单圆弧齿轮泵的瞬时排量与齿轮角速度成正比，且稳定，无脉动。

• method is introduced to design involute gear and cycloid gear with 2d cad software and graphic method.

  介绍用二维cad软件作图法设计渐开线齿轮、摆线齿轮的方法。

• in this paper we introduce to the meshed experiment step on involute gear tooth profile by caxa- 97 software and set up a method of gear cutting tool in the experiment of meshing and cutting gear.

  本文介绍了用微机和caxa-97软件进行渐开线齿轮范成实验的步骤和范成实验时齿轮插刀设置方法。

• the paper recommends the geometry calculation and application of helical involute gear based on end module.

  介绍以端面模数为标準的渐开线斜齿轮的几何计算过程及其应用。

• a through study for the mechanism of the involute gear lapping with dynamic force is made in theory and test.

  对渐开线齿轮动态力研齿进行了理论分析和试验研究。

• comparing with involute gear pumps, circular tooth gear pumps have following characteristics:compact structure, no pulsation, stable rotation, high efficiency, low noise, and long working life.

  与渐开线齿轮泵相比，圆弧齿轮泵的特点是：体积小、无脉动、转动平稳、效率高、噪声低以及寿命长等。

• because of the tooth thickness of the dedendum is larger than that of the common involute gear and the pitchs do not contact each other, the beam strength and surface strength of tooth are increased.

  由于该齿轮的齿根厚度比普通渐开线齿轮的齿根厚，并且节点附近不相接触，因此，其轮齿弯曲强度和接触强度都提高。

• early in 1971, we installed an experimental single circular-arc-profile gear in a 2400hp pass- enger-cargo ship instead of an involute gear for the first time.

  1971年起，我们首先在2400马力客货轮中采用单圆弧齿轮（不必磨齿）代替渐开线齿轮，使用到现在情况良好。

• at last, the result of the involute gear driving design is described.

  最后给出了渐开线齿轮传动设计的计算结果实例。

• on the base of principle of involute gear and its property, the formation of tooth surface are introduced.

  根据渐开线齿轮的原理和渐开线的基本性质，介绍渐开线齿轮齿廓的形成。

• there is no common normal in the conical involute gear and the fixed chordal tooth thickness can not be measured accurately because of the coexistence of helix angle and taper.

  渐开线锥形齿轮由于同时存在锥度和螺旋角，使得其固定弦齿厚无法精确测量，也没有公法线。

• by using geometry analysis method, this paper educed calculation formula of normal direction gear side clearance when internal gearing involute gear transmission center distance waned slightly.

  通过几何分析的方法，导出了内啮合渐开线齿轮传动中心距略变小时，法向齿侧间隙的计算公式，供齿轮传动设计计算之用。

• during the transmission of the involute gear in mesh, the gear engagement stiffness, the load, the sliding velocity and the curvature are varying with the meshing line of the gear teeth.

  渐开线齿轮在啮合传动过程中，其轮齿刚度、接触载荷、齿面速度和曲率半径等沿啮合线在始终变化着；同时，由于齿轮制造、安装误差等原因不可避免地会产生动载荷。

• a thorough study for the mechanism of the involute gear lapping with dynamic force was made in theory and test.

  对渐开线齿轮动态力研齿机理进行了理论分析和实验研究。

• according to the requirements for the involute gear and powder metallurgy theory, the present article gives a principle and method for designing die cave and structure.

  根据渐开线齿轮的基础知识及粉末压制烧结理论确定了设计模具型腔及结构的原理和方法。