英语释义

• bonding thin sheets together

• a layered structure

片语

optical lamination光学无缝贴合技术

delayed lamination延迟迭敷

Cap Lamination帽式压合法

crosswise lamination交错层压

Lamination Machine干式复合机

matte lamination哑胶

lamination Distance照度距离

magnetic lamination磁叠层

full lamination全贴合

film lamination薄膜层合

英汉例句

• their unique function is to provide complete control over those critical aspects of the lamination process that are inherently press related.

  它们独有的功能就是为多层板工艺的各道关键性的工序提供全面的控制。

• integrated corner casting with extended side plate lamination provides extra support whilst the side access holes and wide cylinder slot ensures easy fitting and removal.

  整体铸角延伸至侧板提供额外强度支撑，同时侧门孔和较宽的圆柱槽沟确保安装和拆卸的简便。

• the fluorous emulsion has solid content of 21-35 %, and polymer number average molecular weight of 7000-9500, and may be stored stably for over 6 months without lamination and gelatinizing.

  该含氟乳液固含量为21～35％，聚合物数均分子量为7000～9500，乳液可以稳定放置六个月以上无分层、凝胶现象。

• it is guessed that the new thermal material possess fine warmth retention property and comfortability which is made by folding and adhesion between the down felt and ptfe film lamination fabric.

  预测，羽绒絮毡和ptfe层压织物通过叠合或粘合加工成的新型保暖材料将具有优良的保暖性能和舒适性能。

• as a result of system conversion, historical lamination and external terms, it is necessary to update notion, reform system and seek good external terms of mutual benefit in cooperation.

  究其原因，有体制转换、历史因素和外部关系多个方面，故而必须更新观念，改革体制，寻求建立良性互动的外部协作关系。

• the optimum technology and formulation were determined by contrast experiment, and the problem of the lamination of solids and liquids was resolved satisfactorily.

  通过对比实验确定了最佳工艺条件及配方，较好地解决了八宝粥常常存在的汤汁与固形物分层的技术问题。

• used methyl acrylate, butyl acrylate and vinylphenyl acetate as main material, added a amount of anchoring agent, the adhesive for paper-plastic lamination was prepared.

  以丙烯酸甲酯、丙烯酸丁酯、乙酸乙烯酯为主要原料合成乳液后，再添加一定量增粘树脂制成纸塑复合胶粘剂。

• the advantages of the flame lamination of textiles are easy processing, wide end use, low cost, saving energy and labor. this process has good economic and social benefits.

  火焰复合纺织品用途广，工艺简便，操作方便，节省能源和人工，成本低，有明显的经济效益和社会效益。

• erosion behaviour of the steel tempered at 660℃ shows deformation and lamination of ferrite strips, slipping of single strip. the specimens display best erosion resistance.

  回火后抗沖蚀能力最佳、表现出贝氏体铁素体板条束变形、分层、分片滑移的沖蚀行为。

• a new technology and equipment of annealing and bluing for finished stator and rotor of uncoated cold-rolled electric steel lamination in bell-type hydrogen furnace was introduced.

  介绍了无涂层电工钢沖片迭片成型后的电机定子和转子在罩式炉内进行退火和发蓝处理一次完成的新工艺及装置。

• mathematical model of three dimensional steady heat transferring was established to evaluate the effects of air velocity on heat lamination height and vertical temperature distribution.

  本文阐明了下部送风房间热力分层和垂直温度分布规律，给出了确定垂直温度分布曲线的方法及确定最佳运风量的原理。

• the level the anisotropic research, basing on the lamination factor, the sandstone density and the overlap coefficient describes the sand body growth and the distribution;

  层间非均质性研究，通过分层系数、砂巖密度及重叠系数来描述砂层的发育与分布；

• on the basis of classical lamination theory and large deflection hypotheses of plate, the equilibrium and compatibility equations of simply supported composite laminated plates were obtained.

  基于经典的层合板理论及板的大挠度基本假设，得到四边简支层合板的非线性运动方程及变形协调方程；

• on the basis of classical lamination theory and large deflection hypotheses of plate, the equilibrium and compatibility equations of simply supported composite laminated plates are obtained.

  该方法基于经典的层合板理论及板的大挠度基本假设，得到四边简支层合板的非线性运动方程及变形协调方程；

• no preferential positioning or lamination of these different cells were seen with respect to each other, although some pyramidal cells had apical dendrites oriented toward 「molecular zones」 .

  这些细胞没有特定的位置及明显的细胞分层现象，但锥体细胞的顶树突多指向所谓的「分子层」。

• a new technology and equipment of annealing and bluing for finished stator and rotor of uncoated cold-rolled electric steel lamination in bell-type hytrogen furnace was introduced.

  介绍了无涂层电工钢沖片叠片成型后的电机定子和转子在罩式炉内进行退火和发蓝处理一次完成的新工艺及装置。

• air outlet position didn「t influence the air flow field temperature field, concentration field, heat lamination height and vertical distribution of temperature of work area.

  排风口位置的变化，对下层气流速度场、温度场以及烟气浓度场不产生影响，对热力分层高度、工作区垂直温度分布等热舒适性问题没有影响。

• considerable amount of lamination noted in hole (layering effect parallel to face, much like pages in a book glued together). the upper portion of this broken plate is now on display at the u.

  穿孔里面可见大量层状结构（每层平行于表面，就象把很多书页粘在一起）。

• the public hospital advancement achievements wage reform, is insufficient faced with the understanding, inspection target lamination difficult and so on realistic question.

  公立医院推进绩效工资改革，面临认识不够、考核指标分层难等现实问题。

• lamination teaching」s protophase adequate preparation and scientific management after delamination are the keys of the modes can success and having good teaching quality.

  分层教学的前期充分準备和分层后的科学管理是该教学模式成功及教学质量保证的关键。

• a method of lamination technology to produce complex material insulating cover suitable for high speed diazo printer is reported, by using nonbasic gloss fibre cloth and unsaturated resin.

  报导了采用层敷工艺，使用无堿玻璃纤维布和不饱和树脂研制适于高速晒图机使用的复合材料绝缘机罩的方法。

相似词

leaf叶子；（书籍等的）一张；扇页

layer把…分层堆放；借助压条法；生根繁殖；将（头发）剪成不同层次